Reviews Drain Plug Socket Wrench

Duthyvea Boat Oval Garboard Drain Plug Kit for 1 Inch Marine Bilge Hole Hull Pipe, Stainless Steel Polishing, 3/4 Thread, with Screws & Rubber Seal O-Rings

  • Boat Drain Plug Kit fits 1" diameter transom draining pipe hole. Back mount depth is about 0.55" (14mm). The surface length of the oval garboard drain plug kit is 2" (50mm), width: 1-1/2" (38mm)..
  • Quick Draining: This garboard drain plug kit has two layers thread with OD 3/4", you can easily to screw out the first layer of boat plug with hand, then the marine bilge water will flow out by middle hole..
  • The Boat Plug Retains Itself When Left Open: The retention system works for holding marine drain plug by the second threads layer, it’s not only save your time to find a wrench to open or close draining hole, but also make you conveniently to storage a boat plug by itself..
  • Stainless Steel Boat Drain Plug Kit: The surface of oval garboard drain plug is mirror-polished, made of stainless steel will reduce corrosion..
  • Replacement O Rings & Stainless Screws: 4 spare rubber o-rings would be included in the boat drain plug kit for watertight seal, 2pcs stainless steel screws help for installation..
Check Stock

DASBET 5pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set

  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • M12×1.25MM & M18×1.5MM Threads Chaser: Oxygen sensor thread chaser tool are used for cleaning and re-threading damaged spark plug hole. Cleans damaged spark plug ports and threads. Rethreads damaged spark plugs, eliminates corrosion and straights damaged threads. Reduces the chance of cross threading..
  • This 5pcs oxygen sensor and threads chaser set is suitable for most contemporary vehicles. The oxygen sensor sockets fit on most cars and are ideal for the removal oxygen sensors..
  • Durable: Made from high performance chrome molybdenum and solid cast steel construction for strength and durability, finish with black oxide to prevent rust..
Check Stock

kipa Spark Plug Wrench for 1997-2019 Shadow Ace Aero Phantom Spirit Tourer 750 18mm Replace OE 89216-MBA-000 Durable Superior Reliability

  • Top Quality Spark Plug Wrench Tool, Well-machined, strictly QC-tested before packing, made of sturdy, tough prime materials that Vehicle repair Ensure....
  • MPN: Aftermarket Solid Spark Plug Wrench tool Replace for OE Part Number 89216-MBA-000.
  • Fitment: Spark Plug Wrench Tool Replace for 1997-2003 Shadow Ace 750, 2004-2016 Shadow Aero 750, 2009 Shadow Tourer 750, 2010-2013 Shadow RS 750.
  • Fitment: Spark Plug Wrench Tool Replace for Honda 2001-2009 & 2012-2014 Shadow Spirit 750, 2010-2017 & 2019 Shadow Phantom 750..
  • If you have a Shadow 750 Or 750 ACE and your looking at changing the spark plugs yourself... No modified socket is ever going to work right and you....
Check Stock

Spurtar 14mm Spark Plug Socket 3/8-inch Drive Thin Wall Magnetic Spark Plug Socket - 12-Point Design Compatible with BMW Mini Motorcycle, Car, SUV, Mercedes, Nissan, Peugeot

  • Easy Remove Socket Wrench 14mm Socket Spark Plug: Built-in strong magnet grip systems for easy spark plug removal, 3/8-inch drive. 12-Point 14 mm spark plug socket thin wall 1mm thickness. Good to have a 14mm spark plug repair kit..
  • Fitment: This spark plugs socket magnetic remover fits 2007+ BMW 3.0L turbocharged engines such as the N54, N55, N20, N26, S55, N63, B46, B48, B58, and BMW motorcycles such as the R1200GS. Ideal magnetic socket spark plug tool.
  • 14mm spark plug socket will also be compatible with Mercedes Benz, Nissan, Citroen, Renault 1.2 16v - Peugeot 207 / 307 engines such as the N43, N52, N54, N55, 335, 535, along with lawn mowers and ATVs and many more.
  • *Please check with your engine code or user manual for fitment information.
  • Build to Last: Spurtar 14mm thin wall socket is made with durable, heat-treated chrome vanadium steel (CR-V), ensuring you higher resistance to deformation and long-lasting durability..
  • Buy with confidence: If you have any problem with Spurtar 14mm Magnetic Spark Plug Socket, please email us directly, we promise will provide the best solution....
Check Stock

CruzTOOLS SKHD SPEEDKIT Tool Kit for Harley-Davidson Motorcycles black

  • The new SPEEDKIT provides unprecedented capability in an ultra-compact 7" x 2" x 2" pouch.
  • The SKHD was developed to cover the most common needs of all Harley-Davidson models except the V-Rod.
  • Includes wrenches, nut drivers, star bits, hex wrenches, 5-in-1 screwdriver, pliers, 2-in-1 spark plug socket, and a tire pressure gauge.
  • Perfect for stashing in a saddlebag or fork bag.
  • Kit Contents: 14 x 17mm Open End Wrench, 12mm Combination Wrench, 10mm Combination Wrench, 8mm Nut Driver, 5/8″ & 18mm Combo Spark Plug Wrench w/....
Check Stock

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

  • Oxygen Sensor Socket Wrench Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
  • 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wr....
Check Stock

Elite Engineering USA Beach’N Boat Drain Plug Wrench for 1/2 inch NPT Plug Includes Spare Brass Plug

  • Simple, but practical design with a 9/16 inch square hole at one end of the handle to remove or install your threaded boat drain plug.
  • Includes and provides storage for one replacement 1/2 inch NPT Brass Boat Drain Plug at second end of handle.
  • Incredibly strong custom magnet securely attaches wrench inside or outside your boat trailer to ensure convenient access.
  • Manufactured from aircraft grade, corrosion resistant aluminum.
  • Boat tool measures 5.9 x 1.5 x 0.25 inches.
  • US patented marine wrench is Designed and Made in the USA.
Check Stock

Elite Engineering USA Beach’N Boat Drain Plug Wrench for 1/2 inch NPT Plug, Includes Spare Brass Plug

  • Simple, but practical design with a 9/16 inch square hole at one end of the handle to remove or install your threaded boat drain plug.
  • Includes and provides storage for one replacement 1/2 inch NPT Brass Boat Drain Plug at second end of handle.
  • Incredibly strong custom magnet securely attaches wrench inside or outside your boat trailer to ensure convenient access.
  • Manufactured from aircraft grade, corrosion resistant aluminum.
  • Boat tool measures 5.9 x 1.5 x 0.25 inches.
  • US patented marine wrench is Designed and Made in the USA.
Check Stock

OEMTOOLS 23998 31 Piece Mechanic's Metric Socket and Ratchet Wrench Set, Socket Sets Metric and Standard, 3/8 Socket Set, Metric Ratcheting Wrench Set

  • SOCKET SET ORGANIZER: This 3/8 drive socket set includes deep and shallow 6 pt. sockets, a universal joint, two spark plug sockets (5/8 inch and 9/16 inch), and a 3/8-inch drive ratchet.
  • NO-SLIP DESIGN: This socket tool set features Posi-Grip No-Slip Design technology with off-corner loading for greater torque and more socket-to-fastener contact.
  • This 3/8 deep socket set virtually eliminates fastener rounding.
  • DURABLE SOCKET SETS: Each socket in this wrench and socket set is made with a heat-treated alloy steel for extra strength and longevity.
  • Sockets in this socket and wrench set come with a smooth satin chrome finish that is easy to clean and resists rust.
  • EASY IDENTIFICATION: The EVA tool foam organizer tray with the 3/8 metric socket set features custom cuts for easy socket identification.
  • Tool-sized custom cuts are hi-vis green, making it noticeable when sockets are missing from the metric sockets set.
  • DESIGNED FOR TOOL BOXES: This socket and ratchet set is designed to fit securely in a cabinet or tool box.
  • Metric deep socket set comes in an EVA foam tray that is sized to maximize tool box and tool drawer space.
Check Stock

CruzTOOLS SKEU SPEEDKIT Tool Kit for European Motorcycles , black

  • The new SPEEDKIT provides unprecedented capability in an ultra-compact 7" x 2" x 2" pouch.
  • They'll fit into most OEM tool cavities, but with more content and technician-grade tools.
  • Included are wrenches, hex keys, a 5/8" x 18 mm spark plug socket, pliers, tire gauge, and more - all housed in a sturdy zip-up pouch.
  • The SKEU packs the same muscle as the SKJAS, but with a slightly different wrench set to match European metric size standards.
  • Kit Contents: 10 x 12mm Open End Wrench, 13 x 15mm Open End Wrench, 8mm Nut Driver, 5/8″ & 18mm Combo Spark Plug Wrench w/ lever, Mini 5-in-1 screwdriver w/ Torx T20,25,27,30 bits, Hex Keys: 3,4,5,6mm, 10-50 psi tire gauge, 5.5″ slip-joint pliers, & Heavy-duty zip-up pouch.
Check Stock