Reviews Drain Jetting

Challco 4000psi Sewer Jetter Nozzle,Pressure Drain Jetter Hose Nozzle,1/4 Quick Connector

  • This sewer jetting nozzle is used in wide range of cleaning applications, such as general sewer and drain cleaning and industrial pipe and tube cleaning.
  • 1 forward jet and 6 rear jets.1 forward hole is ideal for cutting debris and breaking up stubborn dirt ahead of it & 6 backward holes drive the nozzle forward and flush debris.
Check Stock

Tool Daily Sewer Jetter Kit for Pressure Washer, 50 FT Hose, 1/4 Inch NPT, Corner, Rotating and Button Nose Sewer Jetting Nozzle, 3600 PSI

  • Sewer jetting kit include 50 feet sewer jet hose, button nose sewer jet nozzle, rotating sewer jetter nozzle, corner sewer nozzle, M22 female to 1/4’’ female NPT coupler and 1/4’’ quick coupler plug..
  • Sewer jetting hose has inner tube, reinforcement and cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4" high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone. Jetter sewer hose is ISO 9001 Certified and pin test each crimp to confirm proper internal crimp. Bend radius of the hose is 4.3 inch..
  • Corner Sewer Jetter Nozzle: 1 water sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0. Side port to blast at corners where hose cannot navigate. Ideal for cleaning around the corner..
  • Button Nose Sewer Jet Nozzle: 1 front jet at 0° that clears blockages. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0.
  • Rotating Sewer Jetter Nozzle: 3 backward rotating blasts into the clogged pipe and moves the nozzle through the pipe. At the meantime, it provides an even cleaning and flushes out debris. It is easy to slide into sew....
Check Stock

Tool Daily Sewer Jetter Kit for Pressure Washer, 100 FT Hose, 1/4 Inch NPT, Corner, Rotating and Button Nose Sewer Jetting Nozzle, 4400 PSI

  • Sewer jetting kit include 100 feet sewer jet hose, button nose sewer jet nozzle, rotating sewer jetter nozzle, corner sewer nozzle, M22 female to 1/4’’ female NPT coupler and 1/4’’ quick coupler plug..
  • Sewer jetting hose has inner tube, reinforcement and cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4″ high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone. Jetter sewer hose is ISO 9001 Certified and pin test each crimp to confirm proper internal crimp. Bend radius of the hose is 4.3 inch..
  • Corner Sewer Jetter Nozzle: 1 water sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0. Side port to blast at corners where hose cannot navigate. Ideal for cleaning around the corner..
  • Button Nose Sewer Jet Nozzle: 1 front jet at 0° that clears blockages. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0.
  • Rotating Sewer Jetter Nozzle: 3 backward rotating blasts into the clogged pipe and moves the nozzle through the pipe. At the meantime, it provides an even cleaning and flushes out debris. It is easy to slide i....
Check Stock

Sewer Jetter Kit for Pressure Washer,Sewer Jetter Nozzles Kit,100 FT Drain Cleaning Hose for Pressure Washer,Button Nose and Rotating Sewer Jetting Nozzle,1/4 Inch NPT,Orifice 4.0,4.5,4000-5800 PSI

  • ❤【Professional Cleaning Kit】Sewer jetting kit includes sewer jet hose 100 FT,button nose sewer jetter nozzle, rotating sewer jet nozzle,1/4’’ quick coupler plug,coupler (female M22 to female 1/4’’ NPT) and waterproof tape.Sewer Jetter parts for Pressure Washer can help you unblock More types of indoor and outdoor drainage devices, combined with any brand of pressure washer, can easily flush obstructions.Working pressure is rated to 5800 PSI. Burst pressure is rated to 11000 PSI..
  • ❤【Durable Sewer Jetting Hose】Sewer jetting hose has inner tube, cover and reinforcement to protect the presure washer hose from bursting.Inner tube is made of thermoplastic polyester, which provides strong toughness .Reinforcement layer is 1/4″ high tenacity polyester textile braid to protect water pipes from explosion.Cover layer is made of thermoplastic polyurethane, which can resist oil, weather, ozone and abrasion. It is ISO 9001 Certified. Pin test each crimp to check proper internal crimp..
  • ❤【Button Nose and Rotating Nozzle】Button Nose 4.0 Orifice.1 front jet at 0°that clears blockages.3 rear jets at 33° flush out debris loosened by the front jet.1/4″ Female Fitting – Fits 1/4″ NPT male sewer jet hose fittings.Rotating ....
Check Stock

WEOSMIRA Pressure Washer Sewer Jetter Nozzles,4 Pieces, Pointed,Button Nose,Rotating and Corner Jetting Sewer Nozzle,Different Models,Stainless Steel,1/4 Inch Quick Connector,Orifice 4.0, 4.5, 5.5

  • ✿This kit includes four different sewer jetter drain cleaning nozzles. Suitable for different cleaning situation..
  • ✿Applications: The water jetting sewer nozzles are always use to clean indoor or outdoor drainage of many types, combined with any type of pressure washer & a sewer jetter hose, such as house drainage line, clogged toilet, clogged sink, industrial pipe and tube cleaning, general sewer drain cleaning etc. Helpful to unclog various types of indoor and outdoor drainage devices, solve many blockage problems such as oil blocks, fine sand or other obstruction.
  • ✿Durable material: The 4 nozzles are made of quality stainless steel, corrosion resistant rust resistant and durable for long term use..
  • ✿Pressure up to 5000PSI, Hot water up to 310 F..
  • ✿Can be connected to 1/4” sewer jetter hose. ❤❤The nozzles are only used for Pressure Washers connected to a sewer jetter hose,Not fit for Garden hose or Water hose. If any question, please feel free to contact us..
Check Stock

Tool Daily Rotating Sewer Jetter Nozzle for Pressure Washer, 1/4 Inch F-NPT, 4000 PSI

  • 3 backward rotating sprinkle blasts into the clogged pipe and moves the nozzle through the pipe. At the meantime, it provides an even cleaning and flushes out debris..
  • Fits sewer jet hose with 1/4″ male end. 1/4″ Female NPT Fitting. Inside diameter of thread is 0.47 inch. Made of stainless steel, corrosion resistant..
  • Ideal for flushing debris or cleaning fixed pipes when connect to a sewer jetter hose. Sewer jetting nozzle is easy to slide into sewer lines and drain pipes..
  • Orifice 4.5. Working pressure is up to 4000 PSI. Water temperate is up to 310° F. Small enough to clean in all of the tight spaces..
  • Give you quick reply within 10 hours if any questions..
Check Stock

PWACCS Sewer Jetter Nozzle for Pressure Washer, Stainless Steel Drain Cleaning Tips for Power Washer, 3 Pieces, Button Nose Jet Nozzle, Rotating Flat Jetting Nozzle and Drain Jet Hose Nozzle, 5000 psi

  • Wild Application: The sewer jetter head kit has been widely used not only in industrials but also in daily lives. It is ideal to be used in cleaning kitchen sink, toilet, industrial pipe, indoor and outdoor plumbing..
  • Premium Material: The pressure washer sewer drain jet nozzle kit is made of durable stainless steel throughout, which is naturally immune to wear, corrosion, rust and oil. A best choice to accompany your whole life..
  • Button Nose Jet Nozzle: Orifice size is 4.0. This kind of jet nozzle is used to clean blockage and debris through one front spray orifice and 3 rear orifices..
  • Drain Jet Hose Nozzle: Orifice size is 6.5. Compared to button nose jet nozzle, this tip has more orifices in quantity (1 in front and 6 in rear), which means it need more power to maintain the same pressure and speed. But it can obviously provide more efficient cleaning..
  • Rotating Flat Jetting Nozzle: Orifice size is 4.5. This jetter nozzle only have 3 backward rotating spray. The location of each orifice make it spin when water runs. It is more destructive to blockages than any other nozzles.
Check Stock

Nitrous Outlet 4150 Stinger Braided Hose Plate System (50-400hp) (5,7,10psi) (10LB Bottle)

  • Jetting for 50-100-150-200-250-300-350-400-450-500-550-600 HP.
Check Stock

Nitrous Outlet 4150 Stinger Plate Conversion (5-7-10psi) (50-100-150-200-250-300-350-400-450-500-550-600HP)

  • Jetting Included for 50-100-150-200-250-300-350-400-450-500-550-600 HP.
Check Stock

Keihin 016.167 PWK 38mm Air Striker Carburetor

  • The Keihin PWK Air Striker two stroke carburetor is refined to perfection and has set the standard among motocross racing carburetors.
  • PWK Air Striker directs air to main nozzle for improved signal and throttle response.
  • Chromed semi-flat (D) throttle valve for excellent response and more flow at high rpm.
  • Available in two popular sizes to cover all your horsepower requirements.
  • Throttle bores sized to give maximum power and easy jetting with jetting parts available.
Check Stock