Reviews Drain Gasket

WELWIK 2 Sets Cooler Drain Plug Replacement Triple Snap Drain Plug Cooler Plug Assembly for Coolers 1.1 Inches/ 2.8 cm Shaft Length, White

  • The cooler drain plug is equipped with a leak-proof gasket, which is tightly sealed to prevent leakage, and the cap is retained to help prevent the cap from being lost..
  • Cooler plug is made of high-quality plastic material, odorless.
  • resistant to dirt, can keep the drain hole of the cooler clean..
  • Drain cover total length 3.9 inches/10 cm, gasket diameter 0.8 inches/2 cm, nut length 1.3 inches/3.3 cm..
  • The cooler drain plug is equipped with a leak-proof gasket, which is tightly sealed to prevent leakage, and the cap is tied to help prevent the cap from being lost..
  • There are 2 drain caps, 2 nuts and 2 washers in the package. Please check whether this product is suitable for your cooler before buying..
Check Stock

showingo 2 Pack Cooler Drain Plugs for YETI Cooler Accessories, Large & Small Drain Plug Cooler Plug Also Compatible with RTIC Coolers

  • Compatibility - Cooler Drain Plug Fit for Yeti Coolers and Also Compatible with RTIC coolers.
  • Cooler Drain Plug Kit Includes 1 Large Screw-On Gasket Replacement Coolers and 1 Replacement Small Cooler Drain Plug with Leak-Proof Design for 20QT, 45QT, 60QT Coolers.
  • Cooler drain plugs with leak-proof design replace your old or broken cooler drain plug perfectly. If the threads on the drain plug get worn out and it’s no longer as airtight as it used to be, perfect cooler replacement parts for RTIC Coolers.
  • Replacement drain plugs are easy to open and close to drain your cooler water, durable and good for easy draining. The screw-in gasket drain plug is easy to use and keeps your cooler leak proof and rugged. When partially open, the drain plug allows you to drain cooler without completely removing the plug..
  • Easy to Use.These replacement drain plugs can drain the cooler water while drain plug is partially open. Simply unscrew the drain plug, pull it out, tilt your cooler, and let the water out. Tighten the cooler drain plug is good for keeping your coolers cold..
Check Stock

2 Pack Drain Plugs for RTIC Coolers, Large & Small Cooler Drain Plugs Compatible with RTIC 20QT, 45QT, 65QT Coolers with New Two Drains

  • Compatible with -- RTIC replacement plugs used in the "Dual Drain Plug System". The large & small cooler drain plugs fit for RTIC 20QT, 45QT, 65QT new coolers with 2 drainage holes..
  • Good Design -- The screw-in gasket drain plug improved finger knob design which are easy to open and close to drain your cooler water. When partially open, the drain plug allows you to drain cooler without completely removing the plug..
  • Easy to Use -- These replacement drain plugs can drain the cooler water while drain plug is partially open. Simply unscrew the drain plug, pull it out, tilt your cooler, and let the water out. Tighten the cooler drain plug is good for keeping your coolers cold..
  • Package Included -- The cooler drain plug kit include 1pc large screw-in gasket cooler drain plug replacement for RTIC coolers and 1pc small cooler drain plug with leak-proof design replacement for RTIC 20QT, 45QT, 65QT Coolers..
  • Satisfaction Guarantee -- We care for all customer's feeling. If this product does not meet your expectations, please send it back for a 100% refund or contact us directly....
Check Stock

2pcs Marine Replacement Nylon Drain Boat Plug & Gasket for Drain Plug

  • Boat Marine Replacement Nylon Drain Plug & Gasket For Drain Plug.
  • Plug to suit standard drain with Water tight seal Retaining legs UV Stabilized.
  • The red gasket provides a secure seal to prevent unwanted water from entering your boat.
  • Total length 54mm. Total width 24.5mm .thread width 19mm.Standard caliper measurement does not exclude the difference.
  • If you have any issues ，please feel free to contact us. 24-Hour Customer Supports..
Check Stock

Best Q M20 x 1.5MM Oil Drain Plug Thread Repair Kit Oil Pan Screws Rethread Tool

  • M20 x 1.5MM Oil Drain Plug Tap Thread Repair Kit Oil Pan Screws Rethread Tool.
  • Used to tap the damaged thread and slightly enlarge the diameter of oil drain hole, then fit a new drain plug and washer..
  • Ideal for repairing sump, gearbox and differential drain plug threads..
  • Suitable for 18mm engine oil screw after skidded and rethread by 20mm chaser then twist into 20mm screw + gasket..
  • Contents: Tap: M20*1.5 1pc, Screw: M20 6pc, Aluminum gasket: M20 6pc.
Check Stock

Neodrain PVC Shower Drain Base Kit Include 2 Inches PVC Shower Drain Base Flange Threaded Adjustable Adaptor and Rubber Coupler Gasket for Square&Linear Shower Drain Installation

  • PVC Membrane Fitting, PVC Construction Drain Flange for Shower Drains,It Works as an Adapter between Floor Drain and Drain Pipe,the shower drain base....
  • The 2" inside diameter rubber seal is designed to connect with 2" No Hub shower drain.
  • While the other side with 2.36" inside diameter is perfect for....
  • Easy to Install- Rubber Gasket is Built-in the Drain Flange,Buyers Don't Need to Buy a Rubber Gasket Separately.
  • For 2" outlet, Works with all No Hub Floor Drains with 2-inch Outlet ( Outside Diameter),Universally compatible with most 2" drain outlets including....
  • Made of healthy and environmental Material. Heavy and durable. No worry or regret to get it. Contact us if you have any questions about this products..
Check Stock

Kayak Drain Plug Kit Boat Scupper Plugs Thread Bung for Kayak Canoe Boat with Screws Hardware 2

  • 【High quality】: This drain plug is made of high-quality plastic, durable for long time use, rubber gasket on each plug protect hull from damage.
  • 【Outside diameter】：The Outside diameter of scupper plug is approx. 25mm / 1 inch.
  • 【Function】: Rubber gasket on each plug keep water away from infiltration and drain plugs is used to drain the water out of the inner hull of your....
  • 【Easy to install】: Simple drill holes and hard to mess up, easily install into your kayak, boat, and canoe.
  • 【Widely Application】: Scupper plugs suitable for kayak boat canoeing canoe ship drain plug.
Check Stock

(24Pcs) Oil Drain Plug Gaskets Replacement for Toyota Lexus Scion Crush Washer Seals Replaces# 9043012031 Aluminum

  • What can you get: you will receive 24 pieces oil drain plug washers in the package, regular replacement of the oil drain plug gasket can better protect your engine.
  • Wide application: this oil drain plug crush gasket washers is compatible with Toyota Prius Tundra Sienna Highlander Lexus Avalon Camry Corolla Tacoma 4Runner RAV4 Scion TC FJ Cruiser etc, fits for these brands' most part numbers.
  • Size details: the outside diameter of crush washer is 0.82 inch, inside diameter is 0.47 inch, thickness 0.07 inch, this oil drain plug gaskets washers is needed for every oil change, it helps to seal the drain plug and oil pan surfaces.
  • Warranty: For any reason, if you are not satisfied with your purchase, please contact us directly. We offer a 1-year warranty, 100% satisfaction guarantee.
Check Stock

KES Kitchen Sink Drain Strainer 3-1/2-Inch Sink Drain Assembly Stopper with Deep Basket Cover Lid Rustfree SUS 304 Stainless Steel, S3001

  • No More Clogged Drains: This kitchen sink drain comes with a sink drain strainer designed to effortlessly catch any type of kitchen waste prevents food and debris from clogging the drainpipe. The drain catcher is a deep waste basket that can hold an enormous amount of gunk while water continues to drain. When it's time to clean up simply take the strainer out wipe it off and GO!.
  • Rustproof: Constructed of premium SUS 304 stainless steel with added 18/8 Chromium/Nickel content to protect against corrosion & rust. Suitable for humid environments. Sink drain housing basket strainer and metal cover with knob are all made of 304 stainless steel..
  • Fits Standard 3.5" Drain Opening: Fits 3.5 inches standard kitchen sink opening. (Please check if it fits your existing sink before shop.) Insert metal strainer into drain hole with the white foam gasket attached and install rubber gasket underneath the sink. Please make sure the gaskets are in the right position to avoid leakage..
  • Drain Cover: T304 Stainless steel drain stopper cover seals tightly and conceals the garbage and waste fittings in your kitchen sink..
  • Dimensions: Max. sink thickness: 0.8 Inch..
Check Stock

Moen 1026 AMC Kitchen Products Garbage Disposal Drain Elbow & Gasket Replacement Part, N/A

  • Replacement Garbage Disposal 1-1/2" Diameter Drain Elbow And Gasket Kit.
  • Fits All Moen, Waste King And Whirl Away Garbage Disposals.
  • Installation Kit Includes Drain Elbow With Gasket, Flange And Two Screws.
  • Backed by Moen's One Year Limited Warranty.
Check Stock