Reviews Down the hole Hammer Work

ABN Spring Loaded Center Punch, Automatic Center Punch Tool – Auto Center Punch, Awl Punch Hole Punch Tool, 5in

  • EASY TO USE SPRING PUNCH TOOL: Put away your hammer, pilot, and center drill and instead use the ABN Center Punch Spring Loaded Nail Setter Tool to make or mark the center of a hole you wish to create.
  • Press down on the nail set tool until the tip of the hammer nail fully retracts into the handle, the spring-loaded trigger will release, and the blade of the metal punch tool will mark the workpiece.
  • FITS YOUR PROJECT: Nail spring tool marks your workpiece with a dimple to give you a starting point that prevents screws and drills from wandering.
  • Use this automatic center punch for metal, wood, glass, canvas, plastic, and leather materials.
  • Use this spring loaded center punch glass break window breaker to enter a car in emergencies or use as a spring loaded awl for your belts or purses.
  • ADJUST FOR ACCURACY: Spring-driven action with adjustable strike force makes punching easier with this simple to use nail punch tool drill marker.
  • Increase and decreased the stroke for higher or lower impact by tightening and loosening the adjustable cap on the nail set punch nail hammer tool.
  • BUILT TO LAST: Center hole punch shank body is constructed from chrome-plated steel for maximum strength and longevity that allows for high impact force and resists corrosion.
Check Stock

Metabo HPT Rotary Hammer, 8.4-Amp Motor, 1-1/2-Inch Spline Shank, Adjustable 360 Degree Side Handle (DH38YE2)

  • Rotary Hammer with 1-1/2-Inch spline shank.
  • MOTOR: Powerful 8.4 Amp motor delivers 950 watts of input power for maximum productivity.
  • POWER: Produces 5.9 ft/lbs of impact energy for faster drilling and chiseling through concrete.
  • APPLICATION: Great for drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods.
  • LIGHTWEIGHT: Only 14.1 lbs for less fatigue.
  • MODES: Two modes of operation - hammer only and hammer drilling controlled by the simple turn of a knob.
  • LOW VIBRATION: Only 18.8m/s2 (full load) for more comfortable operation in hand.
  • LOW NOISE: Only 95.2 dB (full load) for a less noisy work environment.
  • SAFETY: Safety clutch shuts down rotation in the event of a bound bit for improved user protection.
  • HANDLE: Adjustable 360 degree side handle provides better control and can be removed easily.
Check Stock

Starrett Automatic Center Punch with Hardened Steel Metal - 100mm Length, 11mm Punch Diameter Tapered Point - 18AA

  • Makes Drilling Hole Easy - The 18AA Automatic Center Punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping..
  • Steel Construction - This Center Punch is made of hardened steel and has a knurled finger grip for ease of handling and greater punching control Its tempered head makes it less likely to fracture from a hard, off-center blow..
  • No Hammer Needed - This punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work..
  • Adjustable Force - For a heavy mark, the cap is screwed down. Progressively lighter marks are obtained by turning the cap upward Marks made by the point are uniform in depth and size for each setting..
  • Removable Point - The point can be easily removed for regrinding and/or replacement Always wear safety goggles when using striking tools..
Check Stock

BOSCH 11264EVS 1-5/8 SDS-Max Combination Hammer

  • Max. Hole Diameter in Concrete- 1-5/8 Inches. Max. Hole Diameter in Concrete-Core Bit- 4-1/8 Inches.
  • Unmatched Power to Weight ratio - 13-Amp, 8.1-Feet lbs Impact Energy and 14.3-Pound - Best Performing Rotary Hammer in its class.
  • Active vibration control - vibration reduction in the hammer mechanism and the grip area provides maximum user comfort for extended periods of work.
  • One-handed SDS max - one-handed tool free SDS max system makes changing bits easier than ever before while maximizing jobsite productivity.
  • Constant response circuitry - maintains speed under load and overload protection.
  • Turbo power - delivers 20-Percent more power in hammer only mode.
Check Stock

Thor Blaster Hammer Toy Gun - Foam Bullet Blasters Electric Thunder Mjolnir Hammer with Light and 20 Suction Tips Darts Shooting Games Roleplay Super Hero Toys for 3+ Year Old Kids Boys Girls Gift

  • 【2-in-1 Lightning Thor Hammer Toy Foam Bullet Blaster & Guns】If your child loves thor or foam bullet gun then they will love this thor blasters hammer. Thor hammer toys are made of high-quality materials, durable, and not easily damaged. The thunder hammer is super cool, comfortable to hold and easy to shoot. Made from safe EVA material, the bullets are lightweight, soft and child-friendly, making them perfect for indoor and outdoor play.
  • 【Easy for Kid to Operate and Understand】Easy enough for your child to load themselves. Kid have to pull the bottom of the handle straight down to prime it then push the button to launch. It launches pretty far and fast, only one soft bullet at a time though. Thors hammer mjolnir does have 6 extra holes on top to hold spare bullets. The toy gun pistol comes with 20 foam bullets. Other standard darts fit/are interchangeable. Note that the bullet only shoots out of center hole.
  • 【Simulate Lightning】The lights on this dart-blasting hammer are very cool. They look great, and this toy would be an awesome roleplay accessory, especially if you'll be using it in the dark - at night or inside. It lights up and has some ve....
Check Stock

DEWALT FLEXVOLT ADVANTAGE 20V MAX* Combo Kit with Hammer Drill & Impact Driver, 6.0-Ah, 2-Tool (DCK2100D1T1)

  • HAMMER & IMPACT POWER DRILL: The Hammer drill has the function of combining hammer and drill, according to different tasks, the stop button can be easily switched to select the hammer & drill function. Hammer function for drilling on the wall and drill function for drilling holes on steel plates and wood. This hammer drill would be your excellent helper. At the same time, it is also your best choice for gifts..
  • PRECISE SPEEDS CONTROL: Lock button of the impact drill enables you to lock the speed without a constant grip on the trigger to reduce fatigue. The hammer drill has a variable speed switch with 17 dials knob allowing free speed adjustment, you can screw with low gear and drill with high gear..
  • ROTATING HANDLE & DEPTH GAUGE: Its keyed chuck is suitable for drill bits with a diameter (≤13mm) to meet your requirements for different drill bi....
Check Stock

Heywork Cordless Rotary Hammer Drill, 4 Modes Variable Speed and Adjustable Handle, SDS-Plus Chuck Hammer Drill with 21V 2*4.0Ah Li-ion Battery and Charger, Electric Hammer Drill for Wall, Concrete.

  • - The Hammer2203 uses a brushless motor, which eliminates the need to replace carbon brushes and allows the motor to run more efficiently. The high-performance motor enables the rotary hammer drill to provide up to 0-8000RPM, 0-4500BPM and 24J impact energy at no load, making it easy to drill holes in hard materials such as concrete, and you can spend the least effort and the fastest get the job done, we've stressed you're sweating while you work..
  • * & - Heywrok cordless otary hammer drill provides 2 pieces of 21V 4Ah batteries and fast charging, supports overload and overheating protection, and lasts longer. Using batteries instead of wires can work more freely. Others are still looking for sockets, and you've got to work ..
  • & - - The hammer drill has four modes, the rotary button you can quickly switch to drill only, hammer only, hammer & drill, and chisel position adjustment (to adjust the chisel angle before use). One-button slide chuck for SDS-Plus drill For quick and easy drill removal and installation. Heavy-duty hammer drills help you easily tackle a variety of difficult-to-drill holes in materials such as walls, concrete, granite, metal, wood....
Check Stock

1 Inch Blacksmith Anvil Forge Hardy Tool Set, Including Hot Cut Tool, Creasing Tool Stake, Bottom Fuller, Turning Bending Scrolling Fork

  • ... used in a vice. Perfect for while blacksmiths doing repetitive work keeping consistent, like knife making, leaf, armor, etc..
  • 【Hot Cut Tool】Designed a sharp and hard edge along the top, used in the anvil or clamped in a vise to cut hot metal. Place orange/red hot metal or iron bars over the edge and strike with hammer, it can cut most of the way through and prevent flying hot metal, avoiding damage to the face of a hammer or anvil..
  • 【Turning Bending Scrolling Fork】Used to bend fork in an anvil or in a vice. Perfect for making "S" hooks, bending medium stock and most scroll work. This tool allows you to get leverage for manually bending metal pretty quick and effective with a hammer or bending wrench..
  • 【Bottom Fuller】Used in anvil or clamped in a vise to shape metal. Use a hammer to work from the top while the hardy tool works from the bottom. This provides you different anvil surfaces and edges to work with. Designed square shank fits the square hole in the anvil and prevent rotation..
  • 【Professional-Grade Steel Hardy Tools Set】Forged of quality & heavy-duty steel, can withstand very high temperature, sturdy and durable. Superior joint strength, firm and stable, easy to operate and control..
Check Stock

Sabre Tools 4-Piece 12in SDS Plus Drill Bit Set, Carbide Tipped, Rotary Hammer Drill Bits for Brick, Stone, Concrete (1/4\ x 12\

  • 4 Piece 12” SDS Hammer Drill Bit Set – Includes: 1/4” x 12”, 5/16” x 12”, 3/8” x 12”, 1/2” x 12”.
  • Our high quality SDS bits are designed to work in masonry applications.
  • brick, stone, concrete, block, stucco, etc..
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • Drilling speed – Sabre’s SDS hammer drill bits feature 2-flute self-centering carbide tip ensuring fast cut speeds and accurate holes.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock

WORKPRO 5-Piece Hammer Set, Forged & Polished Steel Head, Fiberglass Handle, 32oz Rubber Mallet | 16oz Claw Hammer | 3lb Sledge Hammer | 16oz Ball Peen Hammer | 22oz Double-Faced Mallet

  • Professional Hammer Set: WORKPRO 5-Piece hammer set including a 3lb sledge hammer black paint, a 16oz Ball Peen Hammer, a 16oz Claw Hammer, a 32oz Rubber Mallet and a 22oz Double-Faced Mallet. Different types of hammers fit perfectly for delicate jobs, which can also improve your work efficiency..
  • Fiberglass Handle: The fiberglass for the ergonomic handle reduces vibration and shock transfer, which can reduce fatigue, increases leverage and allow you to work for long periods of time. The safe non-slip strong grip helps you to firmly and comfortably hold the handle. The end of the handle has a storage hole for hanging storage to save space..
  • Forged & Polished Steel Head: The heads of the claw hammer, ball peen hammer and sledge hammer are made of high-quality steel, which is durable, resistant to corrosion and easy to clean. The Claw hammer can be used to pull out nails. The rounded ball end of the ball peen hammer is for shaping sheet metal, striking chisels and rivets. The black coating of the sledge hammer enhances rust protection..
  • Rubber Head & Replaceable Head: Rubber mallet and double-faced soft mallet ar....
Check Stock