Reviews Dovetail Sight Removal Tools

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith.
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO(Screws provided for Trijicon and ADE). Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
Check Stock

HIVIZ 1911 Front Tenon Style Fiber Optic Sight with Interchangeable LitePipes

  • HIVIZ Interchangeable Front Sight for Colt 1911 pistols.
  • Includes three Green, two Red, and one White replaceable LitePipe..
  • HiViz recommends gunsmith installation for all dovetail sights. Due to manufacturing tolerances, some firearms may require additional fitting..
  • Interchangeable LitePipes in red and green.
  • Tenon style sight fits most wide tenon 1911s.
  • Can be narrowed to fit early narrow tenon 1911s.
Check Stock

Kingslayer

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

HHA OL-5019 Optimizer Lite

  • The Tetra delivers a silky smooth 2.1” of travel on your choice of a fixed frame or dovetail bar. To the yard accuracy with our patented R.D.S. sight tapes and precision windage adjustment provide deadly accuracy in the field and on the range. The quiver friendly, wheel forward designs make these sights ideal for bowhunters and 3D shooters alike. With 2nd and 3rd axis adjustment and a full line of accessories, the Tetra is destined to take over as the new #1 slider sight on the market today..
  • A two-stage windage adjustment makes sight-in easy and precise. Totally toolless, once the Tetra is mounted to your bow, you can put the wrench set away and make minor adjustments in the field. With laser engraved witness marks and user-friendly adjustment knobs, dialing in is easier than ever before..
  • Mechanical rheostat for fiber optic brightness control.
  • Machined aluminum pin carrier offers unmatched fiber protection.
  • Easy grip dial for fast range adjustment from 20-100 yards.
Check Stock

Kingslayer [Blu-ray]

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

Astromania Universal Dovetail Base for Finder Scope - Ideal for Installation of Finder Scope, Green Laser Pointer Bracket

  • Fits factory drilled holes on Celestron, Meade, and Orion Schmidt-Cassegrain telescopes, attaches directly to Schmidt-Cassegrain Telescope (SCT) optical tube with included mounting hardware..
  • Compliable with finder scope, Laser Pointer bracket or reflex sight bracket on telescopes, great for adding a second or third aiming device to your telescope..
  • Made of high strength Aluminum with Anodizing Aluminium Process. The base is made of die-cast metal and features two large thumbscrew locks. Includes two M5 screws..
  • Ideal for custom installation of any finder scope, EZ Finder reflex sight, and Green Laser Pointer bracket on any telescope. Dovetail base fits finder scope or reflex sight bracket so you can securely attach an aiming device to any telescope. Synta-style dovetail base -- Fit most bracket designs from Celestron, Orion, Sky-watcher, Vixen, etc. Compliable with finder scope, Laser Pointer bracket on telescopes..
  • Drilled (but not threaded) to accommodate screws up to 5mm in diameter. Center-to-center screw hole spacing on your telescope must be from 10.2 to 30.2mm in order for this dovetail base to be compatible..
Check Stock

Picatinny Rail Mount plate for Glock 17 19 22 Taurus G3C-Work with All railed red dot such as Vortex Venom, Doctor, Trijicon RMR, comes with builtin screw hole for Sig Romeo Zero, Holosun 407k/507k

  • This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply “plug and play”. We recommend having a qualified gunsmith to install.
  • This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to ....
Check Stock

ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

Real Avid Armorer’s Handgun Sight Pusher Sight Tool for Gunsmithing, grey/red

  • ACCURATE: Sight pusher sight adjustment advanced, precision tool to push, change, install and adjusts press fit dovetail front and rear sights on most striker-fire handguns and 1911 pistols.
  • ADJUSTABLE: reversible metal Press Block provides multiple pushing surfaces to accommodate a variety of sights..
  • works on dovetail slots down to 5/32” (4mm) wide.
  • accommodates tall sights up to ½” high.
  • 60-degree surface works with most common rear sight profiles.
  • LEVERAGE: Heavy Duty Torque Handle makes sight adjustments work more comfortable.
  • the integrated 3/8” rachet receiver gives additional leverage if you lack hand strength.
  • SECURE FIT: optional plastic clamps and protective pads help protect finish, while aligning, holding and securing slides. Reduce risk of marring..
  • VERSATILE: Slide cradle accommodates most makes and models of striker-fire handguns and 1911 style pistols Ideal for flat side slides.
  • compatible with Glock style slides, M&P, SIG Sauer P320 style and more. See Compatibility Chart for more information..
  • WORKBENCH TOOL: the Master Sight Tool can be secured directly to your workbench with included bench vise attachment ridge to accommodate numerous work space set-up p....
Check Stock

ADE RD3-006x Green Dot + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS, Non-Aftermarket Slide) Standard Models, Canik TP9SF and Taurus GX4, G3C & G3 with Factory Steel Sights Pistol

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it's initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and....
Check Stock