Reviews Double tube With Cover Lamp

Bonlux 10W R7S LED Bulb 118mm, J Type 118mm LED Light Bulb T3 Double Ended R7S J118 LED Floodlight Replacement Bulb Daylight 6000K for Floor Lamp, Security Light (2-Pack)

  • Technical Features -- 10W 118mm LED R7S Light Bulb - 12mm/0.47" Diameter, 118mm/4.65" Length - Voltage: AC 120V - Beam Angle: 360°, Non-Dimmable..
  • Super Slim -- Standard R7S 118mm base, the diameter is only 12mm/0.47", Bonlux 10W 118mm R7S LED lamp can replace standard floodlight halogen double ended tubes pefectly..
  • Excellent Heat Dissipation -- R7S LED J118 flood light has high quality ceramic body and PC cover, excellent thermal conductivity, good heat dissipation, low power consumption, superior energy efficiency, reduce expense at electricity bill and frequent bulb changes..
  • Widely Applications -- 118mm R7S LED light for use in Floodlight Replacement Bulb, Work and Security Lights, Workshop Lighting, Stage and Studio Lamp, LED Ceramic Metal Halide Lamp, Floor Lamps, Speciality Lights, General Lighting..
  • Energy Saving -- 10W Double-ended J118 R7S LED Light repalcement for 75W halogen bulbs, save about 90% on your electricity bill..
Check Stock

Luxrite 12-Pack 4FT T8 LED Tube Light, Type A+B, 18W=32W, 3 Colors 3500K | 4000K | 5000K, Single and Double End Powered, Plug and Play or Ballast Bypass, 2340 Lumens, F32T8, Frosted Cover, UL, DLC

  • ...lay, and zero worries with 4' tube light bulbs that provide high quality indoor and outdoor lighting. Each LED tube lights is quick to install, has a 3cct tunable switch, damp location rated, comes UL listed and UL classified for your safety, DLC listed for reliability, works in direct wire ballast bypass single or double end installations, existing ballast fixtures, is g13 2-pin base, and backed by a 5 YEAR WARRANTY..
Check Stock

LUXRITE 4FT T8 LED Tube Light, Type A+B, 18W=32W, 3 Colors 3500K | 4000K | 5000K, Single and Double End Powered, Plug and Play or Ballast Bypass, 2340 Lumens, F32T8, Frosted Cover, UL, DLC (4 Pack)

  • ...lay, and zero worries with 4' tube light bulbs that provide high quality indoor and outdoor lighting. Each LED tube lights is quick to install, has a 3cct tunable switch, damp location rated, comes UL listed and UL classified for your safety, DLC listed for reliability, works in direct wire ballast bypass single or double end installations, existing ballast fixtures, is g13 2-pin base, and backed by a 5 YEAR WARRANTY..
Check Stock

Heavy Duty Snow Tube,Inflatable 44 Inch Snow Sledding Tube, 600D Canvas Cover and Smooth Bottom with Rubber Pull Ring and Canvas Handles for Adults and Kids-Blue

  • ...will measure approximately 44 inch across, perfect for kids and adults up to 250 lbs..
  • ❄PREMIUM CANVAS & SMOOTH BOTTOM: The upper surface is made of premium canvas and the lower layer is made of vinyl material. Inflatable snow tube offers lightning speeds while remaining durability to tackle the most rugged slopes.Double stitched canvas cover with built-in grip handles.
  • ❄UPGRADE TOW STRAP & PULLING RING: Unique design with two durable double stitched handles+ tow strap + rubber pull ring makes it easy to pull & tow the tube around without having to wast energy carrying it.
  • ❄SAFETY & COMFORT: CHEINAUTO Snow sleds tube give you the smoothest and safest glide experience on the slopes in winter. Make sure you have enough run-out space on the bottom of the hill you're sliding from and you may go on the sleds for snow with one more people and you will get the double fun!.
  • ❄EASY TO INFLATE: Easily inflate with a standard bike tire pump or car tire pump, when fully inflated, the bottom of your snow slide surface will make a drum sound when you tap on it. Each CHEINAUTO snow tube package includes the canvas cover, heavyweight inner tube, one rubber pull ring, one connect webbing strap, safety valve and cap, and a rapid deflation tool..
Check Stock

Reptile Heat Lamp, Dual-Head UVA/B Reptile Light with Cycle Timer, Basking Light for Reptile Turtle Bearded Dragon Lizards Snake, E26/27 Base with 4 Bulbs (2PCS 25W and 2PCS 50W)

  • 【New Upgraded Double-Headed Design】: The double-headed reptile heat lamp is the perfect solution for pet owners with multiple reptiles. With two heating lamp heads, it can simultaneously meet the heating needs of two or more pets, covering a wide area and expanding the heating zone while providing more UVA/B turtle basking light to simulate natural sunlight and promote your pet's appetite and calcium absorption..
  • 【3-Level Adjustable Brightness & Cycle Timer 】: The reptile heat lamp features an intelligent cycle timer design with a 2/4/6H intelligent timer. Once set, turtle light will automatically switch ON/OFF at the same time every day, without any manual intervention required. This convenient and time-saving function allows you to focus more on your pet care. Additionally, there are three brightness levels to be adjusted to control the temperature according to your pet's needs..
  • 【High-Quality Materials】: The reptile heat lamp clips and tubes are made of high-quality metal, which provides a more robust texture and strong heat resistance compared to other plastic materials. This ensures the safety and durability of the product. Additionall....
Check Stock

Reptile Heat Lamp, TFNN Double-Head Heat Lamp with Clamp, UVA UVB Reptile Light with Intelligent Cycle Timer for Turtle, Bearded Dragon, Lizard and More, 2 Bulbs 25W+50W

  • ...e-saving. The glass tube extends the life of the bulb, simulates the solar spectrum, raises the temperature, replenishes calcium and provides more direct sunlight and higher UV radiation..
  • 【High Quality Material】：Made of high quality metal, 15.2 inches long and thick double-headed gooseneck, can rotate 360 degrees flexibly, sturdy, rust-proof, anti-deformation, long service life, heating lamp holder made of ceramic, upgraded on the original plastic lamp holder, more heat-resistant and safe, double-headed support two kinds of power switching, wider irradiation range, new upgraded clamps firm, not easy to loosen..
  • 【High Quality Bulbs】：Two bulbs are provided, 50W and 25W, with silver plating process to ensure anti-oxidation and explosion-proof, and vacuum glass tube to extend bulb life, simulate the solar spectrum, increase the temperature, supplement calcium, provide more direct sunlight and higher UV radiation..
  • 【Wide Applicability】:The reptile Heat Lamp available in pet crates of all sizes, suitable for most amphibians and mammals, reptiles and succulents. For example: for lizards, spiders, frogs, turtles, s....
Check Stock

HERCOO LED License Plate Light White Lamp with Red OLED Neon Tube Compatible with Frontier Armada Titan Xterra, Suzuki Equator Pickup Truck, Pack of 2

  • [Made in TAIWAN:] Durable PC clips, never break during installation even repeat several times. Perfect fit just like a glove. Smooth gloss black finished cover lens instead of 10 years old textured corroded tag lights housing. IP 68 waterproof, anti-scratch, no faded with long-time exposure..
  • [Super Bright with Red OLED Neon Tube:] Non-polarity, 12-30 volt stable output illuminates. Upgraded license plate lights with 3-row red OLED neon tube strips enhance safety at night and give your truck a modern and luxurious appearance. 6000K pure white brightness is close to 12 am sunshine, 360° uniform ray. 80% reduces LED run super hot and burn out within few weeks than other SMD LED flickering lamp or OEM halogen bulb..
  • [Fitment:] Compatible with 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 Frontier,2008-2015 Armada,2007-2015 Titan,2007-2015 Xterra,2009-2012 Suzuki Equator..
  • [Easy to Install:] Plug and play, no tools required. Direct replacement for factory GM 26510-ZP50A 26510-EA820 26510-ZP30A, 26510-ZJ00A 26510-9FM0A. Only takes a few minutes to replace stock license plate light lamp. Looked almost identical to the original factory lenses and rear lamp..
  • [All in One LED Model & 1 Year Warranty:] Save time and money! Upgrade your pickup t....
Check Stock

Urbanest Faux Silk Drum Lampshade, 16-inch by 16-inch by 10-inch, Gray, Spider Fitter

  • SHADE CLIP WITH SILICONE LEVELLERS. Fitted with heat resistant silicone tubes.It doesn't fall off the bulb and shade doesn't move.The silicone material could stand hot and doesn't melt.
  • SIMPLE AND CONVENIENT TO USE - NO NEED FOR A HARP.Very simple lampshade attachment.
  • easy to use. Clips onto the light bulb, and lampshade goes on top.
  • APPLICATION -This enables you to fit a new style lamp shade on an old lamp.
  • expands your ability to use the lampshade of your choice.
  • allows you replace a lamp shape that has no bracket/lyre/harp or structure that would support a finial.Hang a lamp shade on a homemade lamp like wine bottle.Fit a new fabric,plastic or vinyl cover.It work for any shade that has the spider,best for accommodating a small to medium lamp shade.
  • INSTALLATION -4.25 inches overall,From bulb to finial is approx 2.
Check Stock

Garneck Oil Lamp Globe Replacement Chimney Lamp Shade Kerosene Lamp Glass Replacement Clear Candle Sleeve Cover for Oil Kerosene Lamp 8cm

  • KEROSENE LAMP SHADE Glass craft lamp shade will build decorative diffuse lighting, natural, and warm atmosphere for your room..
  • OIL LAMP GLASS REPLACeMENT This oil lamp cover is easy to install and remove. Suitable for bedroom, living room and more..
  • GLASS CYLINDER SHADE This kerosene lampshade accessory is made of premium material for durable and practical use..
  • GLASS LAMP CHIMNEY The clever structure of lampshade can protect your oil light and kerosene lamp from dust..
  • CANDLE CHIMNEY TUBE It makes your room and bedroom full of warmth and mood. Beautiful and fashionable, simple color matching..
Check Stock

Design Classics Lighting Satin White Glass Shade for Light Fixture - 1-5/8-Inch Fitter Opening

  • BULB CLIP WITH LAMPSHADE LEVELLERS. Wrapped with heat resistant SILICONE TUBES which add friction to grip the light bulb.It fits snug and keeps the lamp shade firmly in place.The silicone material could stand a hot bulb and doesn't melt.
  • SIMPLE AND EASY TO USE - INGENIOUS ADAPTER FOR A LAMP WITHOUT HARP. Simple lampshade attachment,mounts directly on a light bulb and lampshade goes on top.There is no need to measure the harp and figure out how much of the lamp shade will cover.
  • PERFECT FIT STRUCTURE -4.25 inches overall,From bulb to finial is approx 2.
Check Stock