Reviews Double Orifice

gohantee Propane Orifice Connector Brass Tube Fitting 3/8' Flare x 1/8' Mnpt for Freestanding Casting Cooking Stove Grill Turkey Pot Cooker 2PCS

• [COMPATIBILITY]--These are propane nozzle for turkey pot cooker, cast iron cooker stove with 3/8" male thread x 1/8" NPT thread and jets. The orifice compatible with Gasone cooker or other similar brand..
• [SIZES]--The thread of propane orifice: 3/8" flare MNPT x 1/8" MNPT..
• [PREMIUM QUALITY]--This gas orifice jets connector brass hose fitting is made of high quality brass. Brass for corrosion resistance and durability , high temperature ductility and low magnetic permeability..
• [NOTE]--The propane stove orifice is not fit for potable water appliances..
• [SERVICE WARRANTY]--If you have any questions with 3/8 flare to 1/8 orifice, please contact with us and we will reply within 24 hours..

M MINGLE Foam Cannon Orifice Nozzle Tips and Foam Maker Universal 1.1 mm Thread Nozzle and Mesh Filter for Snow Foam Lance 3000 PSI

• ATTENTION: Please screw in the orifice nozzle tighten enough, or it is hard to get thick foam..
• Include 1 piece of foam maker (mesh filter) and 1 piece of orifice nozzle tips (foam generator nozzle). They assembly inside foam cannon for foam....
• If foam cannon works not very well as before, maybe mesh filter wore down and foam cannon orifice tips blocked. You can replace them with new ones and....
• FOAM MAKER: Size: Diameter 0.61 x Height 0.41 inch.
• foam creator made of stainless steel, work durably in the foam sprayer.
• ORIFICE NOZZLE TIPS: NPT male screw nozzles, about 0.28 inch, Orifice Size 1.1 mm. Made of brass, work durably in the foam lance. Max. Pressure: 3000....

Sunrise Natural Gas Burner Valve (Valve 3 3/8\)

EXP VALVES/ORIF TUBE - FIXED ORIFICE TUBE

• See Description For Full List of Vehicles This Item Fits.

TSI Supercool 92311 Deluxe Orifice Tube Service Kit

• Five piece universal kit in a custom molded case.
• Includes all the tools you need to remove and install any style orifice tube.
• Consists of an auger point shaft, nut and arbor, GM puller, extension and orifice tube puller.
• Replacing orifice tubes should go hand-in-hand with compressor replacement.
• Supercool offers one of the most complete A/C maintenance programs in the marketplace.

AC Orifice Tube Removal Tool Fits for GM Vehicles Car Air Conditioning Orifice Tube Remover Installer Tools

• Product Function: AC orifice tube removal tool fits for most GM vehicles. It is used to disassemble the damaged hole pipe auger and turn it into hole pipes for grasping, so that the nut exerts a uniform and stable pressure to avoid damage the small plastic ears on the tube, make replacement and maintenance easier.
• Material: GUZIKO orifice tube removal tool is made of high-quality metal, which is sturdy and durable and can be used for a long time.
• Easy to Use: The tool can be slid into and locked on the tabs on the orifice with a slight twist, and then the old orifice can be pulled and rotated until it can come out. It saves time trying to use needle-nose pliers to enter a small area to pull out the old orifice tube. Don't worry about breaking the end with pliers.
• Notes: Sometimes you have to add a little bit of heat on the pipe to make the other accessories to loosen up a little bit. It's better to apply some heat the heat down and then start pulling.
• After-sale Service: We will offer a 12 months service, if you have any problems in use, Please contact us at any time, we will respond within 12 hours.

Ashford Traditional Single Drive/Unfinished Wheel

• The world’s most popular spinning wheel for 70 years. Many optional accessories make this an extremely versatile wheel..
• Includes: 4 Standard Single Drive Bobbins, Vertical Lazy Kate, Threading Hook, and Learn to Spin Booklet..
• Single drive ratios 7, 9, 12, 17:1. Orifice: 3/8 inch (1 cm). Orifice: 3/8 inch (1 cm). Orifice Height: 27 1/4 inches (69 cm). Wheel diameter 22 inches (56cm). Weight: 17.5 lb (8 kg)..
• Made from New Zealand Silver Beech (unfinished). Assemble required..

Tool Daily Pressure Washer Sand Blasting Kit, Wet Sandblaster Attachment, 2500 PSI, 1/4 Inch Quick Connect

• Wet sand blaster for pressure washer is suction-fed injection of sand into water system..
• Working pressure of pressure washer sand blaster attachment is up to 2500 PSI. Orifice 2.5. Max flow rate: 2 GPM. Temperature is up to 140°F/60℃. Please check image 6 to choose the size of orifice. If you need orifice 3.5 or orifice 3.0, please order “Tool Daily Pressure Washer Sandblasting Kit, Wet Sandblaster Attachment, 5000 PSI”..
• The pressure washer sand blasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 10’’ sand wand (sand input) and permanent nozzle (output)..
• Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
• Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..

GasOne Head Banjo High Pressure Propane Burner 10 in Heavy Duty

• Includes - Burner Head, Orifice, Air Controller & 0-20 PSI adjustable High Pressure Regulator and Hose.
• BRASS FITTING ORIFICE BLOCK - Includes Brass Fitting Orifice block & Air shutter and Spring.
• HEAT RESISTANT - Cast Iron will not melt easily compared to aluminum construction, Has high heat tolerance.
• HIGH HEAT OUTPUT - With 0-20 PSI Regulator it produces up to 200, 000 BTU.

XZT 3000psi(s16)-m22(Female) Pressure Washer Sewer Drain Hose,Sewer Jetter Hose Kit (50FT)

• Sewer Nozzle Outside Diameter Max.: 0.76″( 19.2mm).
• orifice: 1 Front(orifice is 1mm) 6 Back(orifice is 0.7mm).
• Connector: compatible most pressure brand.