Reviews Double Head Cutting Saw

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Fine Woodworking Video Workshop Series - Woodturning Basics

  • 【Durable & Flexible Saw Blade】: The hand saw blade is made of SK5 high-carbon steel. The Japanese pull saw teeth are processed by a high-frequency hardening machine imported from Japan, and the hardness can reach HRC60-63 degrees..
  • 【Double Edged】: One side of Japanese hand saw is 17TPI for cutting hardwood, and the other side is 14TPI for cutting softwood..
  • 【Hardened 3-Edge Teeth】: The hand saw has three-sided grinding gear design, sharp edge, faster chip removal, and smoother cutting..
  • 【Comfortable Handle】: Exquisite beech wood handle and slight curve design make the saw handle comfortable to hold, and the operation is more labor-saving..
  • 【Enrich Your Woodworking Life】: Straight shank double-sided small hand saw, small and light, suitable for fine cutting and small parts production, it is the best choice for woodworking DIY..
Check Stock

Woodworking - This is my only Plane T-shirt

  • 【Durable & Flexible Saw Blade】: The hand saw blade is made of SK5 high-carbon steel. The Japanese pull saw teeth are processed by a high-frequency hardening machine imported from Japan, and the hardness can reach HRC60-63 degrees..
  • 【Double Edged】: One side of Japanese hand saw is 17TPI for cutting hardwood, and the other side is 14TPI for cutting softwood..
  • 【Hardened 3-Edge Teeth】: The hand saw has three-sided grinding gear design, sharp edge, faster chip removal, and smoother cutting..
  • 【Comfortable Handle】: Exquisite beech wood handle and slight curve design make the saw handle comfortable to hold, and the operation is more labor-saving..
  • 【Enrich Your Woodworking Life】: Straight shank double-sided small hand saw, small and light, suitable for fine cutting and small parts production, it is the best choice for woodworking DIY..
Check Stock

POOPLE 20FT Telescoping Extension Pole Saws for Tree Trimming | Manual Tree Branches Pruner | Long Extendable High Pole Pruning Saw with Blade | Tree Trimmer with Adjustable Pole (5-20FT)

  • ... can easily pruner high and hard to reach branches on even tall trees, and do it without the hazard of climbing a ladder, You also can trim at ground level without bending or kneeling..
  • 【Steel Pole Saw Blade】: POOPLE Tree trimmer pole saw have 12inch 3X sharpened tooth is made of premium carbon steel with strong cutting ability, lightweight, durable and rust-resistant. Non-stick blade coat prolongs its working life and ensures a smooth cutting and pruning efficient, save your effort and time..
  • 【Multipurpose Extension Pole】: Telescoping pole saw can adjust the smart 4-stage extension pole to any custom length from 5 to 20 foot with the flip-tab lock. Work with standard thread tools, easy to twist on, it performs all the hard to reach tasks typically requiring poles, such as paint roller, squeegee, cobweb duster, ceiling fan duster, feather duster, light bulb changer!.
  • 【Wide Application】: 2-in-1 Tree saw with pole(5 to 20 foot), practical and multifunctional. 19 inch pole saw head replacement can be used as a telescopic pole saw for pruning high limbs or branches or as a hand-held saw for pruning and grooming lower branches, brush, and logs..
  • 【100% Customer Satisfaction】: We feel confident that you will love POOPLE POLE PRUNER SAW. If there....
Check Stock

POOPLE 12FT Telescoping Extension Pole Saws for Tree Trimming | Manual Tree Branches Pruner | Extendable Limb Saw and Trimmer for Tree Pruning on Branches Less than 2" Diameter (3-12FT)

  • ...u can easily pruner high and hard to reach branches on even tall trees, and do it without the hazard of climbing a ladder, You also can trim at ground level without bending or kneeling..
  • 【Steel Pole Saw Blade】:POOPLE Tree trimmer pole saw have 12inch 3X sharpened tooth is made of premium carbon steel with strong cutting ability, lightweight, durable and rust-resistant. Non-stick blade coat prolongs its working life and ensures a smooth cutting and pruning efficient, save your effort and time..
  • 【Multipurpose Extension Pole】: Telescoping pole saw can adjust the smart 4-stage extension pole to any custom length from 3 to 12 foot with the flip-tab lock. Work with standard thread tools, easy to twist on, it performs all the hard to reach tasks typically requiring poles, such as paint roller, squeegee, cobweb duster, ceiling fan duster, feather duster, light bulb changer!.
  • 【Wide Application】: 2-in-1 Tree saw with pole(3 to 12 foot), practical and multifunctional. 19 inch pole saw head replacement can be used as a telescopic pole saw for pruning high limbs or branches or as a hand-held saw for pruning and grooming lower branches, brush, and logs..
  • 【100% Customer Satisfaction】:We feel confident that you will love POOPLE POLE PRUNER SAW. If there'....
Check Stock

Woodworking: The Right Technique : Three Practical Ways to Do Every Job-And How to Choose the One That's Right for You

  • 【Durable & Flexible Saw Blade】: The hand saw blade is made of SK5 high-carbon steel. The Japanese pull saw teeth are processed by a high-frequency hardening machine imported from Japan, and the hardness can reach HRC60-63 degrees..
  • 【Double Edged】: One side of Japanese hand saw is 17TPI for cutting hardwood, and the other side is 14TPI for cutting softwood..
  • 【Hardened 3-Edge Teeth】: The hand saw has three-sided grinding gear design, sharp edge, faster chip removal, and smoother cutting..
  • 【Comfortable Handle】: Exquisite beech wood handle and slight curve design make the saw handle comfortable to hold, and the operation is more labor-saving..
  • 【Enrich Your Woodworking Life】: Straight shank double-sided small hand saw, small and light, suitable for fine cutting and small parts production, it is the best choice for woodworking DIY..
Check Stock

Goplus Table Saw 10-Inch 15-Amp Portable Table Saw 36T Blade Cutting Speed Up to 5000RPM 45º Double-Bevel Cut Aluminum Table Benchtop Table Saw with Metal Stand Sliding Miter Gauge

  • 【Powerful Cutting Performance】Equipped with high-power 15 Amp motor in low noise, this table saw delivers 5,000 RPM cutting performance to rip through various kind of hardwood with ease. And the heavy-duty table saw stand effectively prevents table from rollover during cutting..
  • 【36 Tooth Blade & Aluminum Tabletop】Coated alumium tabletop with 26" rip capacity can easily rip through larger wood material and reduce extra friction for smoother sliding. Table saw features36T carbide-tipped blade, which is designed with transparent guard and riving knife to protect you from accidental hurt and flying chips..
  • 【Double Bevel Cutting & Adjustable Height】Featuring the double bevel cutting from 0-45°, this table saw provides cross cut at 90°--3" and bevel cut at 45°--2-1/2". And portable table saw has a large hand wheel to control the blade lifting, convenient for different needs, such as slotting, ripping or cutting..
  • 【Miter Gauge & Rip Fence】Sliding miter gauge can be adjusted from -45° to 45° for cross cutting. And self-aligning rip fence with parallel guide on both sides assists the more precise and stable cutting without any wobbling..
  • 【Ergonomic Benchtop Table Saw】On-board storage system is convenient for your wrench and p....
Check Stock

SHALL Fiber Cement Siding Shear 4.8-Amp Hardie Board Cutter with 360 Degree Swivel Head Variable Speed & Continuous Cutting for Cutting Cement Board Tile Board Backer board 2700 SPM

  • Clean cut: Double cut design for creating a 5/16” curled thin strip during operation by the double-cut blade. Compared with manual saw and grinder....
  • 360 degree swivel head: Cutter head can be adjusted to a desired position for delivering comfortable cuts from any angle or direction. Offer....
  • Variable speeds: Speed (0-2700 SPM) is allowed to vary by users. Press trigger lightly to cut slowly and press trigger heavily to cut quickly. For....
  • Cutting capacity: Max cutting capacity is 5/16” (8 mm) and minimum cutting radius is 10”. In addition, applicable for cutting cement board, hardie....
  • Continuous cutting: The lock-on button can be used to lock the trigger switch ON at its fastest speed for users to reduce finger fatigue. For....
Check Stock

More Treasures from American Film Archives 1894-1931

  • ...ormance motors, with a maximum speed of 18,000 rpm, the battery has limited power protection. When you cut to a thick object like a stone, the current is too big and it will stop automatically to protect the motor and last longer..
  • 【90°Adjustable Head and Handle】: The cutting head can be adjusted to 5 different angles (0°/22.5°/45°/67.5°/90°). The cutting head can also be rotated 90 degrees clockwise to instantly become a side trimmer, the second bottom handle can be adjusted to work with the top handle to balance the weight, and you can easily move it back and forth. to suit your size and cutting needs..
  • 【Comfortable weed eater battery powered】: As a true lightweight, the grass trimmer is ergonomically designed and, at only 2.1 kg, particularly light, with a telescopic handle, it offers maximum safety and comfortable working regardless of body size, The new grass trimmer is equipped with a sliding support wheel that allows operation with a Hand allows and is more convenient to use. body size offers maximum safety and comfortable working..
  • 【Service and Package Included】Package includes: 1 x Weed Wacker Bat....
Check Stock