Reviews Door Holder Extension Bracket

PBS Video

  • Xbox Controller Wall Mount & Headphone Holder Hanger Bracket. This is not a generic bracket, this is a specific bracket designed for the best flush fit. Three piece kit that is easy to assemble, simply screw the headphone hanger extension to the bottom of the hanger with the adjoining self-tapping screws, line the hanger and the controller holder holes up and use the single screw to join the two and mount it to the wall (fixes to the wall with one screw)..
  • Ultra-low-profile design unlike others, this prevents the device from sticking out from the wall. Fixes to the wall with only one screw and raw plug (if needed), all supplied with the bracket. Great for managing your setup and keeping it tidy. Never loose your controller & headphones again!.
  • Designed for even the biggest gaming headsets on the market. Keep surface space clutter free! Cables can be wound around the holder for extra management. Can be fixed to walls, units, desks, beds, tables and more. Made of tough durable PETG. Various colours available..
  • Note raw plugs do not have to be used depending on the circumstances. Note we also do various other wall mounts for this accessory and its device so be sure to check out our seller profile. Bracket and Fixings ONLY, Xbox Controller NOT Included..
Check Stock

8 Pack Folding Legs Support Bracket 90° Lock Extension Self Lock Hinges w/Screws Fit for Folding Feet, Folding Workbenches, Kitchen Folding Tables, Steel Thickness 2.3mm

  • Material: Carbon Steel + Surface Electrogalvanizing Finished.
  • 90°Folding Legs Support Bracket Size: 2⅝" x 2⅜" x 2"(67 x 60 x 53mm). Thickness: 2.3mm. Each Bracket Max Load Capacity: 176LB(80KG).
  • Self Lock: When folding the leg, the bracket will be locked automatically. Each bracket comes with 11 screws.
  • Suitable for extension table or bed leg, DIY table or bed, folding workbench project, folding door, extension table bed leg feet.
  • Before purchase, please make sure the width matches up so the bracket can fit. The legs need to be at least 2" Thickness.
Check Stock

Curtain Rod Bracket Extenders Heavy Duty Adjustable Rod Holder Curtain Brackets for Wall for 7/8 or 1 Inch Rods, Set of 3 (Black)

  • ...d out the right distance from the wall, Adjustable Length: 3.5 to 4.5 inches out from the wall. Additionally, the rod holders cups accommodate rods up to 1" (2.54cm) in diameter.
  • Wide Practicability: Our curtain rod bracket 1 inch can not only adjust the length of the extension, but also has a clamping screw, which can be applied to rods of different diameters. So, this curtain bracket can be used not only for curtain rods, but also for shower curtain rods, door curtain rods , clothes drying rods, towel rods and kitchen hanging rods, etc.
  • High-quality Service: If you have any questions about our Curtain rod bracket or stores, or you have other needs for products, please contact us, we will serve you wholeheartedly and do our best to meet your needs.
Check Stock

TOMLOV Digital Microscope Stand BR02, Adjustable Holder Post Support Bracket for Max 1.65\ Diameter Tomlov LCD Digital Microscope DM10 AD206 AD207 Camera,Aluminium Alloy (Base Board Not Included)

  • Note: It is just extension tube ,microscope and base are just for display, which are not included..
  • 【Specially designed for LCD Digital Microscope with 1.56” Lens】The Tomlov microscope extension stand comes with 1.56” holder,which is specially designed for Tomlov DM10,AD206,AD207 or other LCD microscope with 1.56” Lens..
  • 【2022 Upgraded 1--Taller 10" Post】This microscope enhanced stand bracket BR02 extends the length of your digital microscope, helps getting wider and higher view in microscope photography and video shooting.Allows to explore the micro world from the tiniest details to an over view.The distance between the lens and base is extended for more working space too..
  • 【2022 Upgraded 2--Bigger Screw Adjustment】Updated with 2 bigger screws,the BR02 Microscope stand holder helps adjusting and focus easily to achieve your desired result.This Unbeatable upgrade makes your microscope a pleasure to use.
  • 【Easy To Install】Just screw the enhanced post with bracket onto the digital microscope.It holds onto the scope firmly and the adjustments are very precise.With the extension bracket, higher or lower angle digital microscope video shooting is easy and possible.
  • 【Very Solid and Well Made】Aluminum alloy material provides additional ....
Check Stock

Kbrotech Bike Handlebar Extender Double Handlebar Extension Carbon Fiber Mount Holder with Aluminum Alloy Braket Space Saver (DBlack)

  • Incredibly Extra Space:Super longer/extended tube can assemble more items such as light/bicycle computer/phone/bell holder etc.
  • Easy Installation Quick Release:can be installed on Normal Size(25.4mm) and up to Over Size(31.8mm)handlebar.
  • Lightweight and Durable- Carbon Fiber&Aluminum Alloy extension bar and Aluminum Alloy bracket are super light and durable, only 0.93oz weight for the extension bar and 0.97oz for the bracket(each).The Clamp Length: 9.5cm.
  • Thick Rubber Straps Gaskets on the inside of the ring that mounts to your bars for strong and secure hold, won't slide and scratch your bars.
  • Quick to Install - With a Allen Key Wrench,you can have the extension bracket installed within a minute..
Check Stock

Vello Speedy Camera Rotating Flash Bracket with TTL Off-Camera Flash Cord for Canon EOS Cameras (1.5') Kit

  • Universal Lengthen Hot Shoe Extension Bracket- Works as an extension bar mount to attach two rigs at the same time. It attaches LED lights, microphones, monitors, flash, strobe etc, to your dslr camera,DV, smart phone holder, gimbal stabilizer and any camera rigs with 1/4” screw hole or hot shoe bracket..
  • Dual Cold Shoe Mount- 1x integrated cold shoe mount.
  • 1x length adjustable cold shoe mount. Adjustable range: 3-3.5”. International Standard cold shoe mount compatible.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,.
  • Standard 1/4” Tripod Screws- Three 1/4” threaded holes for tripod, light stand, handle grip and other support. Can directly attach this hot shoe extension bar to a tripod via 1/4” tripod screw hole..
  • Hot Shoe Mount Attach Base- Comes with removable universal hot shoe bracket to connect the hot shoe extension bar mount via its 1/4” male screw.And attach the extension bar mount to dslr camera via its hot shoe base..
  • Durable and Solid & Durable- Made of whole aluminum alloy. Black anodized for higher durability. Total Length:8”, Net Weight:3oz. If you have any question with your order,please feel free to contact us..
Check Stock

ChromLives Dual Flash Bracket Hot Shoe Speedlight Stand Umbrella Holder Light Stand Bracket Mount 1/4'' to 3/8'' Compatible with Studio Video DSLR Camera Canon Nikon Yongnuo

  • Light Stand Bracket, Dual Cold Shoe Mount Extension Bar with Umbrella Holder..
  • Dual Flash Shoe Bracket- With double cold shoe mount on an Extension bar. Universal cold shoe mount for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. (Note:this adapter does not fit Sony and Minolta flash).
  • Umbrella Mount Bracket- A hole design for mounting urbrella. 180° Swivel joint allow vertical adjustment of the umbrella and flash light..
  • Light Stand Bracket- Comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand..
Check Stock

ChromLives Hot Shoe Extension Bar Mount, Cold Shoe Extension Flash Bracket, Dual Straight Mount Flash Bracket Compatible with Nikon Canon Sony Olympus DSLR Camera Camcorder DV

  • Universal Hot Shoe Extension Bracket- Works as an extension bar mount to attach two rigs at the same time. It attaches LED lights, microphones, monitors, flash, strobe etc, to your dslr camera,DV, smart phone holder, gimbal stabilizer and any camera rigs with 1/4” screw hole or hot shoe bracket..
  • Dual Cold Shoe Mount- 1x integrated cold shoe mount.
  • 1x length adjustable cold shoe mount. Adjustable range: 0~0.5”. International Standard cold shoe mount compatible.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,..
  • Standard 1/4” Tripod Screws- Three 1/4” threaded holes for tripod, light stand, handle grip and other support. Can directly attach this hot shoe extension bar to a tripod via 1/4” tripod screw hole..
  • Hot Shoe Mount Attach Base- Comes with removable universal hot shoe bracket to connect the hot shoe extension bar mount via its 1/4” male screw.And attach the extension bar mount to dslr camera via its hot shoe base..
  • Durable and Solid & Durable- Made of whole aluminum alloy. Black anodized for higher durability. Total Length: 4.8”, Net Weight:63g/2.22oz..
Check Stock

4 Pack Folding Brackets, TopDirect Lock Extension Support Bracket Foldable Self Lock Hinges with Screws for Table Bed Leg Feet

  • ⚒〖MATERIAL〗Steel plate, here is the operational video: https://youtu.be/DPHpOwGVVHM..
  • ⚒〖SIZE〗63x68x54mm/2.48″x2.68″x2.13″, thcikness: 2.5mm(0.098″)..
  • ⚒〖HIGH-QUALITY HEAVY-DUTY MATERIAL〗Each bracket could hold 500 pounds and the lock in the 90 degree position..
  • ⚒〖SELF LOCK〗When folding the leg, the bracket will be locked automatically, each bracket comes with 11 screws..
  • ⚒〖APPLICATION〗Suitable for extension table or bed leg, DIY table or bed, folding workbench projec, folding door and anywhere need to use for extension table bed leg feet..
Check Stock

A-KARCK Wall Mount Door Hangers 4pcs, Door Storage Bracket with Rubber Lining Compatible with Jeep Wrangler JK JKU JL, Saving Garage Space

  • DOOR STORAGE BRACKET: Designed specifically for 60-pound door suspension. Compatible with Jeep Wrangler CJ YJ TJ LJ JK JKU JL JLU 1956-2021. Not work with half or soft doors..
  • WALL MOUNT DOOR HOLDER: When you need to drive without a door, this door hanger can hang your factory door safely and stably. No need to take up much garage space..
  • PREMIUM MATERIAL: Made of high-quality materials with black powder coated finish. Durable structure, corrosion-resistant and scratch-resistant..
  • RUBBER CUSHION: Each bracket is equipped with a rubber gasket to protect your door from scratches..
  • EASY INSTALLATION: Including all installation required hardware. Simply drill the screws into the pre-drilled mounting holes, then mount the bracket to the wall..
Check Stock