Reviews Door Hinge Mortise Jig

Aluminum Alloy Door Hinge Jig ，Door Hinge Hole Woodworking Hole Opener Slotting Locator ，Hinges for Wood Cabinet Kitchen Door Lock Installation

  • Hinges for Wood: Hinge jig is perfect for wooden door hinge groove. The door hinge jig can help you complete the installation quickly. Make the installation of door hinges more convenient, easy and improve work efficiency..
  • High Quality: Multifunctional wooden door slotting locator is made of aluminum alloy, which is sturdy and durable. It comes with an adjustment wrench, a trimming and bottom cleaning tool, and a rubber anti-slip design, which is safe to hold and does not hurt the facade..
  • Hinge Jig: Size: 34*20CM, the door lock jig can be opened with a maximum size of 18CM, and a maximum clamp of 6CM. It is easy to adjust and use with its own scale,use door hinge jig for router..
  • Positioning Adjustment: flexible adjustment in four directions, precise positioning, slotted guide plate of the lock body, under the aluminum positioning pressure plate and precise scale, the slot can be slotted according to the hinge you need to install..
  • Note: The hinge jig needs to be used with a trimmer. After grooving, all the corners are rounded. It needs to be trimmed to a right angle and then ins....
Check Stock

270 Continuous Hinge With Holes, Bright Brass, Door Leaf: 72\ x 1-1/4\ W

  • Black non mortise hinge design, it has load- bearing capacity, good performance, excellent and useful..
  • The non mortise cabinet hinge are rust- resistant, and has good toughness, high hardness, attractive and long- lasting..
  • Non- Mortise Door Hinge can open and close smoothly, suitable for display cabinet, wine cabinet and home door..
  • Black cabinet hinges smooth surface makes sure that you can use them without any noise, durable and safe..
  • Non- mortise door hinges with excellent furniture fittings, simple installation and easy operation, fit for home, office, shop, and so on..
Check Stock

Woodhaven 8536 3-1/2 Hinge Jig 5/8 Radius

  • Fastest, easiest, least expensive and most accurate way to cut a hinge mortise. Clamps to work so there's no nail holes or other unsightly blemishes.....
  • Made of 10mm (.393”) thick phenolic for heavy duty use, measures 5-5/8" x 7-5/8"..
  • Uses a bearing guided bit (our 8500 - sold separetly), or bushing & bit combination (5030K & 13416 - sold separately), to follow the jig for perfect....
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

DUEBEL Door Lock Hole Opener Kit for Installing Doors Lock Mortiser Kit for Wooden Doors Mortising Machine Door Lock Installation Kit Mortise Jig

  • 【APPLICATION】DUEBEL door lock hole opener kit is designed for installing hotel doors, security doors and door lock modifying. The door lock jig....
  • 【WIDE ADAPTABILITY】Pro door lock hole mortising jig for solid wood doors-varied thickness. Putting lock holes into an expensive door panel can be....
  • 【EASY TO USE】The mortice lock fitting jig is simple to understand and easy to use for professional carpenters and new users. But if you are new....
  • 【3 CUTTER BITS: 18/22/25 MM】It has 3 different hole cutters (Sizes: 18/22/25 mm) made of Tungsten Carbide (TC) steel, higher quality over....
  • 【EASY TO CARRY】The door lock mortiser kit is made mostly of steel, total weight with case: 9.37 lb (4.25 kg). The mortise jig comes in a large....
Check Stock

Automatic Self-Closing Door Hinges Black Matte 4 Inch x 4\

  • Spring door hinges 4 inch self closing rounded corners with 8 holes for wooden door,standard door,screen door,master closet,basement door,bathroom door,laundry room.door hinges is strong and finish is solid.Easy to install and adjust.Durable steel construction.Solid matte black full mortise spring hinges For enabling your doors to Self-closing Smoothly. Each outside door Hinge black matte Measures 4”X4” and 2.7mm thickness..
  • Spring hinges self closing 4 inch have durable steel construction.Spring loaded hinges 4 inch for doors/gates/entertainment center/boats/wood fence/wide entrance/metal door. Easy to adjust for the perfect tension. Door will automatically closes behind you, no left open and slamming door ever again!.Fits Door Thickness 1-3/4" Thick -- Hinge Thickness 2.7 mm.Adjustable Tension - 2 Hinges Per Pack 1 Pair.
  • 4 inch spring hinges 5/8" radius suitable for drawer,dresser,wardrobe.4 inch self closing exterior door hinges for doors,such as shower,bedroom,bathroom,living room.Smooth operating plain bearing hinge.Commercial door hinges heavy duty,Strong durable design make these interior door hinges a long lasting.Low metal friction, smooth operation without jam or squeak.Nice Commodity hinge in matte black finish..
Check Stock

Kreg KMA3225 Shelf-Pin Jig 1/4' (6 mm)

  • Two edge alignment knobs position the cup hole from the edge of the door, while the edge pin sets the distance from the top/bottom..
  • The drill guide with metal bushing locks into jig and creates a perfectly straight hinge cup hole.
  • Guide bushings built into body of drilling jig leta you pre-drill pilot holes in 4 common locations, making sure hinges are straight and door closes true. The 1/16″ diameter drill bit for pilot holes is included..
  • Easily set your cup hole depth on the included 35mm drill bit using the built-in depth setting fixtures on the left and right side..
  • The hinge marking guide detaches from bottom of jig and allows you to transfer and mark center lines and hinge location to cabinet wall or frame.
Check Stock

35mm Concealed Hinge Jig Kit, Woodworking Tool Drill Bits Hinge Drilling Hole Router Jig for Cabinet Cupboard Door Installation

  • Hinge punching locator: This hinge drilling hole router jig kit is the most useful tool for using concealed hinges for your doors..
  • ABS plastic material: 35mm hinge drilling jig is made of high quality engineering plastic, this hinge hole drill guide is durable. This is a set of drill guide tool used for convenient hinge hole drilling, light and portable, easy to operate..
  • Easy to use: Suitable for their own home operation, do not need professionals. Simple to use with any drillno special tools needed. Make cabinet door installation easy..
  • Efficient high precision drilling: You may speed up 50% comparing with the traditional drilling method and can make all flat-bottomed holes of the exact size..
  • Application: 35mm hinge drilling jig comes with a 35mm forstner bit and depth stop. The concealed hinge jig is suitable for 35mm hinges..
Check Stock

35mm Concealed Hinge Boring Jig Wood Furniture Door Cabinets Hinge Installation Tool Hinge Hole Drilling Guide For Carpentry ABS Plastic

  • Quick hinge installation jig:The hinge drill guide can help you quickly drill the perfect concealed hinge hole. Suitable for furniture door cabinet....
  • Features a V-locator that works off of a center reference line.
  • Can be adjusted for changes in door edge to cup alignment.
  • ABS plastic hinge pocket hole jig,lightweight and portable, easy to operate.
Check Stock

Adoles Aluminum Door Hinge Jig,Woodworking Door Hinge Template,Slotting Locator,Suitable For Door Lock Jig And Router Jig,Helps You Install Quickly

  • 【SlLOTTING RANGE】 Maximum clamping 2.4 inches door panel slotting, maximum opening 7.1 inches, hole puncher comes with a scale length and width positioning support four-way flexible adjustment, powerful door hinge installation kit.
  • 【ALUMINUM ALLOY MATERIAL】 High-quality aluminum alloy one-piece molding, strong and durable, can be used as a woodworking door hinge template kit for router long-term use.
  • 【CONVENIENT AND QUICK ADJUSTMENT】With butterfly screws for quick adjustment of slotting size, the clamping part is designed with rubber anti-slip to ensure that the surface of the wooden door is not damaged. It is the choice of professional woodworkers..
  • 【MULTIPLE USE FUNCTION】 Can be used as door hinge template hinge slotting and can also be used for lock body guide slots and other slotting applications and designs, newcomers need to adapt to the tool to gain experience after more convenience and fast..
  • 【HINT】Router jig needs to be used with a trimming machine. After the slotting is completed, you need to pay attention to the milling knife touching the hinge jig, w....
Check Stock

TPOHH 4 Inch X 3 Inch Stainless Steel Ball Bearing No-Mortise Door Hinges, Surface Mount Flat Leaf Hinge with Mounting Screws 3 Pack - Smooth Movement Rotatable 360° , Brushed Silver Finish

  • 【Easy to install】These 4" x 3" No Mortise Door Hinges are constructed of Stainless Steel. They feature a non-mortise design allowing them to be easily mounted on the door’s edges, avoiding the need to chisel and mortise for installation. For best results, use a bit to drill pilot holes before screwing in fasteners to avoid splitting wood..
  • 【Enjoy The Benefits of a Ball-bearing Hinge】Applying superior bearing, the door hinges are capable of rotating 360° and difficult to get stuck or stagnate, Smoother operation prevents squeaking noises, The greased bearings reduce the rotational friction extending the life of a hinge in heavy use situations. These hinges tend to be more durable than standard, or plain bearing hinges..
  • 【Non-Removable Pin】Heavy-gauge Stainless material for added strength, Suitable for doors up to 99 lbs (max. 45KG). Equipped with two permanently lubricated ball bearings for smoother and quieter operation. This TPOHH non-mortice hinge has a non-removable riveted pin for extra security on external doors..
  • 【DETAIL SIZE AND VALUE PACKAGE】3 packs of stainless steel hinges, and 24 pieces of mounting screws included. The no mortise hinge size is 4 x 3 inches, the thickness is 0.1 inch/2.5mm. The screw size is #8 x 1 inch. The....
Check Stock