Reviews Do Not Iron

Chicago City Flag Patch - 3x2 inch. Embroidered Iron on Patch

  • Chicago City Flag Patch measures 3x2 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leath....
Check Stock

Game Over Marriage Patch Medium - 3x3.75 inch. Embroidered Iron on Patch

  • Game Over Marriage Patch Medium measures 3x3.75 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch....
Check Stock

Machine Gun Bunny Rabbit Patch - 3.1x3.75 inch. Embroidered Iron on Patch

  • Machine Gun Bunny Rabbit Patch measures 3.1x3.75 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorc....
Check Stock

Respect is Earned Loyalty is Returned Patch - 4x1.5 inch - Embroidered Iron on Patch

  • Respect is Earned Loyalty is Returned Patch measures 4x1.5 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this ....
Check Stock

I'm Your Huckleberry Black White Patch - 3x3 inch - Embroidered Iron on Patch

  • I'm Your Huckleberry Black White Patch measures 3x3 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will sc....
Check Stock

CafePress Crazy Grandma You were Warned About Oval Bumper Sticker, Euro Oval Car Decal

  • I'm The God Fearing Gun Toting Flag Waving Conservative You Were Warned About Patch measures 4x1.5 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do....
Check Stock

Offended You are A Fuck I Dont Give Yoda Patch - 4x1.5 inch. Embroidered Iron on Patch

  • Offended You Are A Fuck I Dont Give Yoda Patch measures 4x1.5 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as th....
Check Stock

No Guns Just Guts Thin Silver Line Patch for Correctional Officers - 3.5x2.4 inch. Embroidered Iron on Patch

  • No Guns Just Guts Thin Silver Line Patch For Correctional Officers measures 3.5x2.4 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on pa....
Check Stock

JeepTails Howling Wolf Moon Silhouette Tail lamp Light Covers Compatible with Jeep Wrangler JL (Non-LED) - Black - Set of 2

  • Wolfpack Patch Wolf Howling Moon Silhouette measures 4x3.6 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this ....
Check Stock

Freedom Ain't Free in Memory of Our Fallen Boot Rifle Helmet Patch - 3.5x3.5 inch. Embroidered Iron on Patch

  • Freedom Ain't Free In Memory of Our Fallen Boot Rifle Helmet Patch measures 3.5x3.5 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on pa....
Check Stock