Reviews Distribution Box Cable Optical

Professional RF Cable TV Signal Amplifier with High 40dB Gain

  • ...le outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 1700FT or 500m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels. Anti-Interference module design with advanced noise filer built in..
Check Stock

Lithonia Lighting RD 50K 90CRI MW M6 OneUp-4JBK Direct-Wire LED Recessed Downlight, 5000K/8.9W/720L, Round-Matte White

  • Spun steel, round baffle trim. Integrated galvanized steel junction box with captive door for easy access. Suitable for daisy chaining (pulling wires). Available in 3000K color temperature LEDs.
  • Round baffle recesses optical system into the ceiling to prevent glare and provide a traditional look. Diffused lens provides even light distribution for general illumination, equivalent to 65W incandescent flood lamp. Wide flood beam angle at 003e90°. CRI 003e90. Maintains at least 70% light output for 50,000 hours..
  • Tool-less installation. Secure trim retention with two side-mounted spring clips for easy installation in plaster, sheet rock, or plywood ceilings. The integrated junction box - with pre-installed non-metallic bushing - allows non-metallic cable to be fed through without the hassle of knockouts. The captive junction box door provides easy access to pre-installed 3-port push wire quick connectors for straight-forward wiring. Rated for Type IC installations. Maximum of 4 No. 12AWG through branch circuit conductor suitable for 90°C permitted in box. Ground wire provided..
Check Stock

Lithonia Lighting RD 40K 90CRI MW M6 OneUp-6JBK Direct-Wire LED Recessed Downlight, 4000K/10.9W/870L, Round-Matte White

  • ...und baffle trim. Integrated galvanized steel junction box with captive door for easy access. Suitable for daisy chaining (pulling wires). Available in 3000K color temperature LEDs.
  • Round baffle recesses optical system into the ceiling to prevent glare and provide a traditional look. Diffused lens provides even light distribution for general illumination, equivalent to 65W incandescent flood lamp. Wide flood beam angle at 003e90°. CRI 003e90. Maintains at least 70% light output for 50, 000 hours..
  • Tool-less installation. Secure trim retention with two side-mounted spring clips for easy installation in plaster, sheet rock, or plywood ceilings. The integrated junction box - with pre-installed non-metallic bushing - allows non-metallic cable to be fed through without the hassle of knockouts. The captive junction box door provides easy access to pre-installed 3-port push wire quick connectors for straight-forward wiring. Rated for Type IC installations. Maximum of 4 No. 12AWG through branch circuit conductor suitable for 90°C permitted in box. Ground wire provided..
  • LED module with high-efficiency on board driver. Dimming down to 10%. For compatible dimmers, refer to: Compatible dimmers chart. Actual wattage may differ by +/-5% when operating at 120V +/-10....
Check Stock

eSynic 3X2 Optical Switcher Splitter, Optical Audio Splitter 3 in 2 Out Aluminum Alloy 3 Port Optical Switch, 2 Way Digital Audio Splitter with IR Remote/Power Adapter Support PCM2.0 5.1CH DTS AC3

  • 【3 In 2 Out Optical Audio Splitter Switcher】Support 3 Optical Selection Input, 2 Optical Output. 3 Digital Optical Toslink Sources Input Switch to 2 Optical TosLink (SPDIF) Ontput to Your Sound Bar/Optical Bluetooth Transmitter/Amplifier. Compatible with PS3, PS4, Blu-ray Player, Cable Box, HDTV,etc..
  • 【Support 3 Latest Audio Format】Supports all Digital SPDIF Audio Formats Including PCM/LPCM2.0/DTS/Dolby-AC3, Support Signal Retiming. It Does Not Support 7. 1CH Dolby Digital Plus..
  • 【Long Distance Transmit with Power Adapter】Used Optical Fiber Cable Loss Less the 0.2Db/m, Output Distance is Up to 25m(82ft). with Power Indicator LED, LED Clearly Indicate the Working State of the Splitter. Comes with a 5V 1A Power Adapter for Stedy Charging..
  • 【Remote Control & Manual Switching】Plug & Play, Input can be Selected via IR Remote Control(Included) or Button on the Switch. Support Last Time Working State Memory when Power Off..
  • 【Aluminum Alloy Material with 6.6ft Toslink Cable】Optical Audio Splitter Make of Aluminum Alloy for Sturdy and Anti-interference, Over-voltage Protection can Prevent the Damage Caused by Connecting Unmatched Power Adapter. Comes with a 6.6ft Toslink/Optical Cable, Convenience for Using..
Check Stock

eSynic Optical Switch, SPDIF TOSLINK Digital Optical Audio Switch 3 in 1 Out with Remote Control & Optical Audio Cable 6 feet for PS3 Xbox Blue-Ray DVD HDTV

  • 【Aluminum Alloy Material with 6.6ft Toslink Cable】eSynic TOSLINK Switch Makes with Aluminum Alloy Material for Sturdy and Anti-interference. Comes with a 6.6 feet Toslink Cable, Convenience for using..
  • 【3 In 1 Out Audio Switching】Three Toslink/Digital/Optical Audio Input Signals Switch to ONE Toslink Optical Output. From TV, PS3, PS4, Blu-ray Player, Cable box, to one Optical Port on your Sound bar, Hearing Aid, Optical Bluetooth Transmiter, Amplifier, Surround Sound System. (Note: This Item is Optical SPDIF Switcher, The Output Interface Can Only Be Connected to a Audio Device.).
  • 【Audio Format Support】Supports all Digital SPDIF Audio Formats Including PCM2.0/DTS/Dolby-AC3, Support Signal Retiming..
  • 【Remote Control & Manual Switching】Plug & Play, Input can be Selected via IR Remote or Button on the Switch, Using the Optical Fiber Cable Loss Less Than 0.2Dbm, Output Distance Up to 40m..
  • 【Overload Protection】Over-voltage Protection can Prevent the Damage Caused by Connecting Unmatched Power Adapter to the Machine. (Comes with 18-Month Warranty).
Check Stock

Digital Audio Optical Audio Switch 2 in 1 Out, SGEYR Digital Optical Audio Splitter SPDIF Toslink Switch Optical Switcher with IR Remote Control & Optical Cable for PS3 Xbox Blue-Ray HDTV

  • 【Digital Audio Optical Cable Splitter】Two ways of optical fiber SPDIF Toslink signals switch to one sets of optical fiber signal receiving device. Optical splitter makes with metal material for sturdy and anti-interference. Plug and Play. Powered audio optical splitter is more stable than passive SPDIF/TOSLINK splitter(Please supply power before use, or use a signal source to supply power). Comes with a 5V power adapter for stedy charging.
  • 【Long Output Distance】Lossless sound quality transmission. Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m/130ft. With Power Indicator LED, LED Clearly Indicate the Working State of the Splitter. Digital optical switches can be Selected via IR Remote Control(Included) or Button on the Switch.
  • 【Support Audio Format】Optical cable splitter support LPCM2.0 / DTS / Dolby-AC3, 32kHz, 44. 1kHz, 48kHz and 96kHz. Optical fiber audio aplitter does not support 7. 1CH Dolby Digital Plus, Dolby TrueHD. Support Signal Retiming.
  • 【Widely Compability】The input port work with two Optical audio signal, such as PS3, PS4, Xbox, Blue-Ray DVD, HDTV, STB, Xbox, TV box, DVD player, and More. The output work with one sets of optical audio signal receiving device such as soundbar/digital amplifer, di....
Check Stock

192KHz Digital to Analog Audio Converter, Xafissy Optical to RCA Converter with Optical Coaxial Cable 3.5mm Jack DAC for TV DVD PS3 Amp Receiver Speaker

  • 【Material】Our updated DAC converter made of aluminium alloy material has anti-Interference functionalloy, more stable in transmission and does not generate Heat, making it more durable and extended service life..
  • 【Multi-Point Connection】Optical to 3.5MM converter supports uncompressed 2.1-channel PCM or LPCM digital audio signal output, will not supports 5.1 channel Dolby sound. Good Anti-Interference function makes the sound pure and clear..
  • 【Easy To Install】 The converter is easy to use, just plug and it will automatically detect the audio signal to work immediately. Connect the Optical or Digital Coax output of HDTV, TV Box and other devices with this digital to analog audio converter, then RCA L/R or 3.5mm Jack output on the other side with your headphone or stereo speaker..
  • 【Wide Compatibility】This digital to analog adapter is compatible with devices with RCA or 3.5mm jack input, including the receiver, speaker, AV Amps, old sound system, Bose, headphones. And devices with optical and coaxial output such as TV, Xbox, Blu-Ray/DVD Players, TV Box, etc..
  • 【Package Includes】1 x Digital to Analog Audio Converter, 1 x Toslink Cable (Optical cable), 1 x USB Power Cable (Power Adapter is Not Included), 1 x User Manual. (This optical digit....
Check Stock

E-outstanding 25dB HDTV TV Antenna Light Amplifie 1PC High Gain Low Noise Amplifier Kit TV HDTV Antenna Signal Booster Gain with USB Power Cable

  • ...le outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels..
  • Anti-Interference module design with advanced noise filer built in. -20 dB Output/Inpu....
Check Stock

Fiber Optic Drop Cable Stripper for FTTH Drop Cables (Stripping Plier for Rubber-insulated Optical Cable) and CFS-3 Fiber Optic Stripper ( 3 Port Hole Fiber Optic Stripping Tool ), Fiber Tool Kit

  • 【FTTH Cable Striping Plier】The blade is sharp, which can easily strip the thread. It will not damage the optical fiber core when stripping the outer cable. The blade is not exposed, and it can prevent blunt objects from colliding with the blade and causing damage to the blade. It also can prevent the blade from scratching the user. 2.4-inch scale ruler, which is clear to ensure the accuracy of the peeling length. You can choose the peeling length you need. Easy to use, increase work efficiency..
  • 【FTTH Cable Striping Plier Applicability】Adaptive range: Indoor 3mm (W) * 2mm (H) optical cable.
  • Adaptive optical fiber: 1/2 core optical fiber.
  • Adaptive coating diameter of optical fiber: Φ0.25mm & Φ0.9.
  • Adaptive cladding diameter of optical fiber: 125μm..
  • 【CFS-3 Fiber Optic Stripper】 For stripping 250 micron buffer coating from 125 micron optical fiber,All stripping surfaces are manufactured to precise tolerances to assure clean,smooth strips. Precision Diameter Hole & V-Opening in Blade allow for accurate buffer coating removal,Every fiber stripping tool is tested after production to ensure a consistent high quality cut out of the box..
  • 【CFS-3 Stripper Three-port design】Hole (1) 2 - 3 mm fiber jacket cuts down to the 600 - 900 micron buffer....
Check Stock

Amalink 3 Port Optical Switcher Splitter 3 in 1 Out , with 1 Way Spdif Toslink Optical Splitter/ IR Remote Control Optical Switcher Splitter, 3 Port Spdif Toslink Optical Switch

  • 1.[3 in 1 out Toslink Optical Switch] Three ways of optical fiber signals switch to one sets of SPDIF/TosLink signal receiving device. Support PS3, PS4, Blu-ray Player, Cable box, HDTV, Sound bar, AV Receiver or Amplifier..
  • 2.[Remote control, plug and play] The input control can through IR remote control and also can directly press the button.Remote Control Distance Up to 3m..
  • [Support Audio Format] LPCM2. 0/DTS/Dolby-AC3, 32KHZ,44.1KHZ,48KHZ,96Khz,192KHZ. It does not support 7. 1CH Dolby Digital Plus, Dolby TrueHD, because 7. 1CH audio cannot be transmitted via fiber optic cable and must be transmitted over HDMI cable..
  • [Long Distance Transmit]Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m(130ft), LED status indication, No loss of quality..
  • 5.[Aluminum Alloy Material]Optical Audio Splitter Make of Aluminum Alloy for Sturdy and Anti-interference, Over-voltage Protection can Prevent the Damage Caused by Connecting Unmatched Power Adapter..
Check Stock