Reviews Dispensing Gun Holder

Dripless Consumer Grade Smooth Round Rod Caulk Gun C150 | Metal Caulking Gun for 10oz Cartridges

  • The rod retracts after each trigger pull to prevent dripping. The caulk gun has a 5:1 Thrust Ratio..
  • Smooth pressure rod provides consistent bead control and works with most caulks and sealants..
  • The cradle allows the user to securely hold the gun that provides a consistent dispensing flow..
  • The ladder hook, seal puncture tool and spout cutter let you reload 10oz cartridges without a blade..
  • A trusted brand since 1992, Dripless manufactures innovative, premium caulking and dispensing guns..
Check Stock

Dripless Brand CH200 Cradle Frame Hex Rod Caulk Gun | Dripless Metal Caulking Gun for 10oz Sealant and Adhesive Silicone Cartridges or Tubes | 10:1 Thrust Ratio | Contractor Grade

  • ...s. A must have for DIY house repairs..
  • COMFORTABLE HAND GRIP: For a long workday, the cradle allows the user to securely hold the gun in their hand. Squeeze the trigger and the non-rotating rod retracts to help prevent dripping. and allows you to continue with a consistent dispensing flow..
  • VERSATILE TOOL: Don’t get down, just hook the gun to the ladder. Easily use the seal puncture tool and a spout cutter (built into the side of the gun) to open a 10 oz. cartridge or tube and reload the metal gun without searching for a blade..
  • INDUSTRY ORIGINATOR: A trusted brand since 1992, Dripless manufactures innovative, premium caulking and dispensing guns for the Contractor, Tradesmen and DIY Enthusiast. They stand behind their high quality, affordable and well-made tools 100%..
Check Stock

Great Stuff PRO Gaps & Cracks | Gun-Applied Insulating Foam Sealant, 24 oz. – Cream (12 Pack), 341557

  • FILL GAPS & CRACKS. This expanding foam fills, seals and insulates gaps up to 3" inches, creating a long-lasting, water-resistant and fireblock seal around plumbing and electrical, in basements, attics, and more..
  • GUN-APPLIED. Reusable for 30 days when left attached to GREAT STUFF PRO Dispensing Gun (sold seperately). Minimize waste and save on costs, while providing professional quality craftsmanship with more control and less mess..
  • SPRAY ANYWHERe. Tackle a variety of indoor and outdoor projects or jobsites of homes and buildings. Adheres to wood, metal, masonry, glass and most plastics..
  • QUICK-CURE. Stop waiting around and keep the pace of your projects on target. This foam sealant dries tack-free in 10 minutes and cures rigid for trimming in 1 hour. Trim, sand, stain and paint for a truly GREAT finish..
  • FILL MORE GAPS. Get the job done right the first time with this cost-effective bulk case of polyurethane foam crack filler from GREAT STUFF. Includes a 12-count of 24 oz. cans, each with threads to attach to the dispensing gun..
Check Stock

Dripless Contractor Professional Open-Frame Hex Rod Caulk Gun SH200 | No Drip Metal Caulking Gun for 10oz Sealant and Adhesive Silicone Cartridges or Tubes | 10:1 Thrust Ratio | Contractor Grade

  • ...s. A must have for DIY house repairs..
  • COMFORTABLE HAND GRIP: For a long workday, the cradle allows the user to securely hold the gun in their hand. Squeeze the trigger and the non-rotating rod retracts to help prevent dripping. and allows you to continue with a consistent dispensing flow..
  • VERSATILE TOOL: Don’t get down, just hook the gun to the ladder. Easily use the seal puncture tool and a spout cutter (built into the side of the gun) to open a 10 oz. cartridge or tube and reload the metal gun without searching for a blade..
  • INDUSTRY ORIGINATOR: A trusted brand since 1992, Dripless manufactures innovative, premium caulking and dispensing guns for the Contractor, Tradesmen and DIY Enthusiast. They stand behind their high quality, affordable and well-made tools 100%..
Check Stock

MG Chemicals 8329TFS Thermally Conductive Adhesive - Slow Cure, 25mL Dual Dispenser

  • Cure time of 1 hour 20 minutes at 80 °C or 96 hours at room temperature.
  • Dispensing Gun sold separately (cat# 8DG-50-1-1).
Check Stock

TCP Global Gravity Feed Paint Spray Gun Holder Stand with Strainer Holder, Wall or Bench Mount, HVLP

  • 2 Piece Gravity Feed Spray Gun Holder with Removable Strainer Holder (Color may Vary).
  • Keeps your spray gun ready to use and allows you to easily strain your paint into the spray gun cup.
  • Holder can be mounted on a bench top or used as a wall mount gun holder.
  • Lightweight sturdy design that is made with steel.
  • Use this Holder to avoid the awkwardness of putting your Gravity Feed Spray Gun Down and the difficulty of straining your paint before you put it in the Gun Cup!.
Check Stock

kemimoto UTV Ranger Gun Holder, Anti-Scratch Shock Resistant UTV Gun Holder Mount Bracket On Seat Compatible with Polaris Ranger General Can Am Defender Pioneer Side by Side (Hold 2 Guns)

  • 【Upgrade material】-kemimoto UTV gun holder is made of upgraded durable PU material. Rigid enough to support guns, but soft enough that it won't scratch or damage gun. Shock and vibration resistant gun holder can keep stable and protect your guns..
  • 【Easy install and good muzzle control】-No tool assistance is needed, just use UTV middle seat belt go through the seat gun holder and connect it to complete the installation. The entire installation process only takes a few seconds. (You can see the Installation process in the video)..
  • 【Non-slip bottom】- The bottom of kemimoto ranger gun rack with unnique non-slip stripes designs, which will make sure your gun holder will not fall while driving..
  • 【Widely Fitment】-kemimoto UTV gun holder with two soft buffer slot channels to carry two guns. Accurate appearance design can save space and does not affect driving. Keep the barrels of two guns pointed safely at the floor and no make contact with your optics or sights. It can fits side by side 3 seats UTV. kemimoto ranger rack of gun will compatible with Polaris Ranger/general, Can-Am Defender/X3/Commander, Pioneer, Talon,Viking, Kawasaki Mule,John Deere Gator..
  • 【Firmly & Satisfactory Services】-This rack holder of gun configured with upper and lowe....
Check Stock

AZDENT Updated Dental Composite Unidose Plastic Caps Applicator Dispenser Gun Grey

  • AZDENT Plastic syringe with steel barrel used to place.
  • Dental Dispensing Gun compatible with most unidose tips.
  • Please be suggested to disinfect with alcohol or wipe with cloth (Any problem about the item,please contact.).
  • The ergonomic design of the injection gun,and most of the material can be used in conjunction, is the best choice for sticky materials.
  • Package included:1* Dental Composite Gun Dispenser.
Check Stock

Annhua Dispenser Gun Kit 50ml Dental Impression Material Dispensing Guns, Solid Epoxy Gun 1:1/2:1 for Dispense Dental Resin Materials, Adhesive and Glue

  • ➤ Specifications: 1:1/2:1 ratio manual dual cartridge dental dispensing gun with 50ml tube cartridges capacity. Works well with lower viscosity epoxys and works for many dif brands of adhesive..
  • ➤ How It Works: The cartridge slides in and is held firmly in place with a lever, and then you can dispense the mixed epoxy smoothly by squeezing the handles together. Please note that you also need a disposable mixing nozzle..
  • ➤ Widely Used: Fitting mixing gun can be used to dispense 50mL dental materials, soft/hard relining materials, bite registration materials, dual-curing composite resins, self-curing temporary crown and bridge resins, etc. Also it's suitable for household, such as dispensing adhesive for body/trim repairs or decorating..
  • ➤ Fuctions: The dispenser gun is designed for smearing or dripping various two-component adhesives or coatings, which can solve the problem of uneven mixing of two-component adhesive products..
  • ➤ Warranty & Service: E-mail reply within 8 hours to solve all your problems, 30 days unconditional refund and 12 months warranty for the quality. Please contact the seller if you have any questions..
Check Stock

3D Dental CUG Composite Unidose Dispensing Gun

  • Dispensing Gun compatible with most unidose tips..
  • Plastic body with steel barrel used to place composites..
  • Autoclave, recommended Temperature 120 degree centigrade..
  • Most of the material can be used in conjunction, best choice for sticky materials..
  • Package includes:1* Composite gun dispenser, shipped from US warehouse, 3-6 days delivery..
Check Stock