Reviews Direct Acting Valves

Hydraulic Adjustable Variable Flow Control Valve, 0-30 GPM, 3/4” NPT Port Size

  • SPECIFICATIONS: Chief’s front end loader control valve has 1 spool, 3 position spring-center with 4th position float detent, a 25 GPM flow rate, and 3000 PSI maximum working pressure. It has 1/2" NPT work, 3/4" NPT inlet/outlet port, and weighs 16 lb..
  • VERSATILE: The RLD Series 1 spool 4 way directional control valves can be used to forward, retract, or hold the position in double-acting hydraulic cylinders. Their versatility means these hydraulic valves can be used in most hydraulic circuits..
  • ROBUST: Our hydraulic control valve 1 spool has a precision machined construction and is extremely sturdy. Dynamic and high performing, the control valve operates easily at pressures as high as 3000 PSI and can be actuated in multiple ways..
  • ENERGY EFFICIENT: Equipped with a float detent, this hydraulic valve 1 spool, allows the hydraulic fluid to pass over the center of the valve to the other port. These valves are energy and effort efficient..
  • HIGH UTILITY: This loader valve control can effortlessly shift into three positions per requirement. Our hydraulic directional control valves offer enhanced directional control of actuators, even in cramped spaces, and prevent excess heat build-up..
Check Stock

Dorma RTS88-105-HO-3 Barrier-Free Overhead Concealed Door Closer Body for Interior Doors - Meets ADA Requirements and Designed to Fit into Headers 1-3/4 Inches x 4 Inches

  • Dorma RTS88-105-HO-3 Overhead concealed door closer body - barrier-free. Meets ADA requirements of 5 lbs.of force for opening interior doors.
  • Fits headers as small as 1-3/4 inches by 4 inches for frames that are aluminum - but is also adaptable to hollow metal frames and wood. Closer body is non-handed.
  • One closer for both double-acting or single-acting interior or exterior doors with 105 degree swing and hold open. Pressure relief valve protects closer from abuse due to forced closing.
  • Accommodates maximum door weight of 200 lbs (exterior) or 250 lbs (interior) including all hardware. Maximum interior door width up to 3 feet - Sweep area from 105 degrees to 20 degrees - latch area is from 20 degrees to 0 degrees.
  • Adjust two non-critical valves to control closing speed - Thermostatic valves insure constant closing speeds due to temperature variations - mechanical backcheck slows door prior to cushion contact.
Check Stock

1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/2" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

1/2 Brass Electric Solenoid Valve 110V AC NBR Seal N.O Air Gas,Fuel

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/2" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

LC LICTOP Brass Sintered Bronze Breather Vent Flat Pneumatic Muffler Filter,1/4" NPT (Pack of 10)

  • Easy to install and high lift to reduce results, fast and reliable connection.
  • They are suitable for manual valves, solenoids, exhausts, vacuum generators, crankcases, steering boxes..
  • The silencer/muffler is used to reduce the dynamic noise of the exhaust of pneumatic components or equipment..
  • Commonly used in single-acting cylinders or valves to prevent dust and foreign particles from entering the port to the atmosphere..
Check Stock

1/4 Brass 12V DC Electric Solenoid Valve NPT NBR Seal Normally Open Air Water

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/4" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

Women's 2-Pack Classic-Fit Short-Sleeve Crewneck T-Shirt P412

  • X2 steel valves are a direct descendant of the Xceldyne full race titanium valves.
  • Specialized high performance steel alloys specific to the intake and exhaust valve.
Check Stock

Prox Racing Parts 28.1334-1 Steel Replacement Exhaust Valve

  • Fits: Honda CRF 250 R 2004-2007, CRF 250 X 2004-2013.
  • ProX steel valves are manufactured of premium grade steel to exact OEM specifications and tolerances.
  • Manufactured by the leading OEM factories in Japan and are a direct and cost-efficient OEM replacement.
  • ProX steel valves can be used in combination with all the OEM valve train components like valve springs, guides, bases and retainers.
Check Stock

Woder WD-S-8K-ADV-DC Ultra High Capacity Under Sink Water Filter with Direct Connect Fittings - WQA Certified 8,480gal – Removes Chlorine, Lead, Chromium 6, Heavy Metals, Odors/Contaminants - USA Made

  • MADE IN THE USA - NO PLUMBING REQUIRED – Comes with ‘Direct Connect’ hoses that fit standard 3/8” water valves under US kitchen and bathroom sinks. The 3/8” Direct Connect Stainless Steel Hoses are made to install directly to existing cold water valve and faucet stem under your sink. Replacement Cartridges WD-S-8K-REP (ASIN B08BZMN7B1)..
  • WQA GOLD SEAL CERTIFIED CARTRIDGE - WD-S-8K Cartridge is certified by WQA to NSF/ANSI 42 for Chlorine, taste, odor and NSF/ANSI 372 for lead free compliance as verified and substantiated by test data for 8,480 Gallons..
Check Stock

FORTLUFT Electric Exhaust Cutout Valve Stainless Steel 3.00''/76mm

  • Inside Diameter 3.00”/76mm – Operating Voltage 12V.
  • Electric Motor – Fully Stainless Steel – Fast Opening and Closing.
  • Universal Electric Exhaust Cutout Valve FORTLUFT is a part of the automobile exhaust system. This element allows you to control the exhaust system sound by directing the exhaust gases through the muffler’s direct-flow exhaust pipeline. In turn, the direct-flow exhaust system allows increasing the dynamic characteristics of the car. The valve is mounted by welding method..
  • Electric Exhaust Cutout Valve FORTLUFT is accomplished with a modern electric drive – this is a new technology that, unlike obsolete vacuum valves and other models of electric valves with Y-pipes, ensures quick and reliable work of the mechanism. Nowadays, such electric valves are used by leading automobile manufactures and tuning studios around the world..
  • Electric Exhaust Cutout Valve FORTLUFT is controlled by the remote (product SKU 4401125). The remote control has three buttons: ON / S / OFF. The ON command – fully open, the OFF command – fully close, the S command – partly open/close the valve in six different positions, designed for the situations when you need the exhaust pipeline to be opened/closed partway. The valve can also be connected to a....
Check Stock