Reviews Din Rail Surge Arrestor

TRENDnet 6-Port Hardened Industrial Gigabit PoE+ DIN-Rail Switch 4 x Gigabit PoE+ Ports Shared Gigabit Port RJ-45/SFP Dedicated SFP 120W Power Budget IP30 Lifetime Protection Black TI-PG62

  • ETHERNET PORT INTERFACE: 4 x Gigabit PoE+ ports, 1 x shared Gigabit port (RJ-45/ SFP), 1 x Dedicated SFP slot.
  • POE POWER & SWITCHING CAPACITY: The 6 Port Gigabit PoE+ DIN-Rail Switch has a 12 Gbps switching capacity and 120 Watt PoE+ power..
  • EXTREME TEMPERATURE SWITCH: This Gigabit PoE+ Switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments..
  • DIN-RAIL & WALL MOUNT KIT: This 6-port Gigabit PoE+ industrial switch comes with an integrated DIN-rail mount and mounting hardware..
  • REDUNDANT POWER: The 6 port network switch has dual redundant power inputs with overload current protection (power supply sold separately: models: TI-S15052, TI-S24052, TI-S12048, TI-S24048, 48VDC3000).
Check Stock

Lightning arrestor N Female to N Female Bulkhead Coaxial WiFi Lightning Surge Protector IP67 with 90 V Gas Tube 50 Ohm DC-3GHz

  • 1.Lightning arrestor,Protects 3G,LTE Cellular Boosters and 2.4 GHz WiFi Access Points and GPS Receivers from lightning strikes, Requires additional ground cable.
  • 2.N female to n female Bulkhead lightning with a rubber O-ring seal for mounting through an enclosure wall, Body brass nickel plated, Contact brass gold plated ,Teflon(PTFE) Insulator for a reliable signal every time,Salt spray test for 48 hours.
  • 3.50 ohm lightning surge protector,Frequency Range up to 3 GHz / Attenuation is less than 0.2 dB / VSWR ≤1.2( DC-3Ghz),waterproof level is IP67.
  • 4.N arrestor,It has a replaceable gas discharge element with High Surge Power Capability ( 90V Gas tube).
  • 5.N Surge protector should be installed as close a possible to the equipment to be protected, often at the point where the coax cable enters the building.They can also be installed near the antenna for additional protection.
Check Stock

TRENDnet 8-Port Hardened Industrial Unmanaged Gigabit PoE+ DIN-Rail Switch, TI-PG80, 200W Full PoE+ Power Budget, 16 Gbps Switching Capacity, IP30 Rated Network Switch, Lifetime Protection, Black

  • ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ Ethernet ports.
  • FULL POE+ POWER BUDGET & SWITCHING CAPACITY: The Gigabit PoE+ switch supplies up to 30 Watts of PoE / PoE+ power per port with a 200 Watt PoE power budget and allows for a 16 Gbps switching capacity..
  • DIN-RAIL & WALL MOUNT KIT: This 8-Port Gigabit PoE+ network switch comes with an integrated DIN-Rail mount and mounting hardware..
  • EXTREME TEMPERATURE SWITCH: The metal hardened IP30 rated Gigabit PoE+ Ethernet switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments..
  • REDUNDANT POWER: The 8 port switch has dual redundant power inputs with overload current protection (power supply sold separately: model: (TI-S24048).
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches come with lifetime manufacturer protection..
Check Stock

BreeRainz Din Rail Cutter, Double Groove Rail Cutter Tool w/Dual Scale Measuring Ruler, for 1.4 Inch Iron Aluminum Rails

  • 【Double Groove Rail Cutter】- Featuring 2-groove design. Come with long lever handle. This double groove rail cutter can precisely cut both iron & aluminum Din rails at a time with less effort..
  • 【Smooth Rail Incision】- Differ from band saws incision, sharp blade on the professional din rail cutter can ensure the rail incisions neat & smooth. No complex operation. Just press the handle and cut the rails straight.
  • 【Dual Scale Measuring Ruler】- The new version of manual rail cutter has a dual scale ruler included, which allows you to quickly adjust the cutting length and easily cut rails to your desired sizes..
  • 【Wide Cutting Range】- Various sizes of steel & Aluminum DIN rails can be cut. 20" total cutting length. You just need push the slider, set the cut length, insert the rails and get the rails you need right away..
  • 【Practical Rail Cutting Tool】- Simple Structure w/ portable size. Manual din rail cutter provides a perfect solution for electric power, construction and completing other tedious cutting tasks..
Check Stock

UCTRONICS Raspberry Pi DIN Rail Mount, Compatible with Arduino, RPi 4B/3B+/3B/2B/B+, Pi Zero, Raspberry Pi Pico

  • A DIN option to provide a wide range of flexibility in mounting for multiple SBC devices, such as Raspberry Pi 4, 3 B/B+ and all other A, B and Zero Models, Raspberry Pi Pico, Arduino Uno/Mega 2560, BeagleBone series..
  • The mounting bracket is made of 1.2mm carbon steel, attaches to both the SBC and the DIN rail sturdily, multiple optional mounting holes help you mount the different boards and the DIN rail clips in both horizontal and vertical way..
  • Recommended for creating an array of Raspberry servers, home lab and other industrial projects, make it very professional and easy to maintain when needed..
  • Has no hassle to mount in the 19" rack with UCTRONICS DIN rail rack mount, please search for ASIN B09823N6FY to get it..
  • You'll be getting a mounting bracket, 2 DIN rail clips, and standoffs, and screws..
Check Stock

TRENDnet 10-Port Industrial Gigabit PoE+ DIN-Rail Switch, 8 x Gigabit PoE+ Ports, DIN-Rail Mount, 2 x SFP Slots, 240W PoE Power Budget, Network Switch, IP30, QoS, Lifetime Protection, Black, TI-PG102

  • ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ ports, 2 x Gigabit RJ-45 / SFP shared ports.
  • POE+ POWER & SWITCHING CAPACITY: A 20Gbps switching capacity and 240W PoE power budget supplies up to eight Power over Ethernet devices with PoE+ power.
  • DIN-RAIL & WALL MOUNT KIT: This 10-Port gigabit PoE+ industrial switch comes with an integrated DIN-Rail mount and mounting hardware.
  • EXTREME TEMPERATURE SWITCH: The metal hardened IP30 rated gigabit PoE+ switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments.
  • REDUNDANT POWER: The 10 port network switch has dual redundant power inputs with overload current protection (power supply sold separately: models: 48VDC3000 / TI-S24048.
  • GROUDING POINT: 10-port Ethernet switch grounding point feature protects equipment from external electrical surges.
  • SHOCK & VIBRATION RESISTANT: The Ethernet switch is rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6).
Check Stock

DIN Rail Mount Bracket for Raspberry Pi A+ B+ 2B 3B 3B+ 4B Zero Arduino Uno Mega Mkr BeagleBone

  • This product can easily mount Raspberry Pi / Arduino / BeagleBone to DIN rail, expand their range of applications to industrial control..
  • Supports Raspberry Pi 1 Model A+ / Pi 1 Model B+ / Pi 2 Model B / Pi 3 Model B / Pi 3 Model B+ / Pi 4 Module B / Pi Zero / Pi Zero W, Arduino Uno R2 /....
  • High quality DIN rail feed and mounting very stable, can support width 35mm / 32mm / 15mm DIN rail. Support horizontal and side installation. The....
  • Thickness 1.5mm/0.06" aluminum bracket sheet, the weight is very light and very strong..
  • Package included: 1x Aluminum bracket, 1 pair DIN rail adapter feed and mount screws, 6x M2.5x10mm standoffs, 12x M2.5x6 pan head screws, 4x M2x12mm....
Check Stock

OONO DIN Rail Mount 30A/300V 2x12 Position Screw Terminal Block Distribution Module.

  • DIN Rail mount 8 Channel 10Amp SPDT Power Relay Module, DC 5V Version..
  • JS1-5V-F Power Relays. LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass dual layers PCB..
  • High quality terminal block: Pitch 5.0mm/0.197.
Check Stock

Electric Meter, KWh Meter, Single Phase 4P LED din Rail Electricity Power Consumption Wattmeter Energy Meter, 10-40A

  • 【DIN Rail Mounting】The energy monitor is small size, light weight, with good reliability and easy installation. 35mm standard DIN-rail mounting in accordance with standard DIN EN50022. Six widths (12.5mm modulus) in accordance with DIN43880..
  • 【5+1 LED Digital Display】Standard configuration 5+1(99999.1KWh) digital display. Double color LED of kilowatt meter indicates the power status (green) and the energy pulse signal (red)..
  • 【Easy to Contact】The standard configuration pulse output is passive (polar) and the remote pulse output can be selected as passive (non-polar). KWH meter is easy to contact with various AMR systems and conforms to the standards IEC 62053-31 and DIN43864..
  • 【One-way measurement】One-way measurement of single-phase two - wire active energy consumption. This has nothing to do with the direction of the load current. Comply with IEC 62053-21..
  • 【Two Wiring Methods】The din rail energy meter has direct connection operation, two wiring methods. Standard configuration S type wiring, U type wiring can be selected. Extend the terminal cover to protect th....
Check Stock

Coaxial N Type Lightning Arrestor 0 to 6 GHz (N-Male/N-Female) 50ohm,Protects 3G, 4G, LTE,GPS, 2.4GHz /5GHz Wi-Fi, 900MHz, Ham Other Outside Antennas

  • 1.Reliable Wide-band Performance (DC ~ 6 GHz) ,Lightning arrestor 50 Ohm ,Bi-Directional Protection (N-Male / N-Female Connectors) - Bulkhead / Panel / Outdoor Mountable - High Quality Construction.
  • 2.Lightning arrester protects HAM Radio Equipment and GPS Receivers.Protects 900MHz, 2.4GHz & 5GHz WiFi Outdoor Antennas,Protects 50 Ohm 3G, 4G, LTE Cellular Boosters and Amplifiers.
  • 3.Lightning surge protector n female is very Low RF Insertion Loss (Signal Attenuation) - 50 Ohm Impedance - DC Pass-Through.
  • 4.Pack one piece Ethernet lightning arrestor,replaceable 90V Gas Discharge Tube with Multi-Strike Capability Shunts Damaging Surges,Transients,and Lightning Strikes to Ground.
  • 5.N connector lightning arrestor Connect to Antenna Coax Feedline and Earth Ground.
Check Stock