Reviews Din Rail Serial Adapter

Industrial Serial Rs232 Rs485 Rs422 to Fiber Converter Bidirectional High Speed Optic Modem Sc Single Mode 20km 1310nm Serial over Fiber Converter

Bi-directional high Speed Serial Data – The Serial Optic Modem have 1ch RS232, 1Ch RS485, 2Ch high Speed RS485, all are Bi-directional. Serial data is fully transparent, baud rate is self-adaptive, no setting is required..
High Speed RS485 RS422 – The Serial Fiber Extender's 2Ch RS485H can be grouped into 1Ch High Speed RS422 which can used for DMX512 communication in Stage Lighting Control..
12~48V DC Input – The RS232 /RS485 /RS422 fiber media converter support 12~48V DC Input. Wide range voltage makes it compatible with more DC power supply system..
Industrial Grade Quality – Use industrial grade components and aluminum housing, it can work at wide range temperature -40°C to 75°C (-40°F to 167°F). You can use it in outdoor harsh environment..
Din-Rail & Wall Mount –The media converter come with 35mm Din-rail Clip and Wall mount accessories..

Connect to configure and remotely manage an RS-232 serial device over an IP network.

This product can easily mount Raspberry Pi / Arduino / BeagleBone to DIN rail, expand their range of applications to industrial control..
Supports Raspberry Pi 1 Model A+ / Pi 1 Model B+ / Pi 2 Model B / Pi 3 Model B / Pi 3 Model B+ / Pi 4 Module B / Pi Zero / Pi Zero W, Arduino Uno R2 /....
High quality DIN rail feed and mounting very stable, can support width 35mm / 32mm / 15mm DIN rail. Support horizontal and side installation. The....
Thickness 1.5mm/0.06" aluminum bracket sheet, the weight is very light and very strong..
Package included: 1x Aluminum bracket, 1 pair DIN rail adapter feed and mount screws, 6x M2.5x10mm standoffs, 12x M2.5x6 pan head screws, 4x M2x12mm....

Standard serial port level, RS232 model or RS485 model can switch by software.
Conversion direction can be set to: CAN?? Serial, CAN?Serial, CAN?Serial.
Serial Bus baud rate range from 600bps to 115200bps.
CAN-Bus supports CAN2.0A and CAN2.0B frame format, conform to ISO/DIS 11898 standards.
CAN-Bus baud rates range from 5Kbps to 1Mbps.
CAN-Bus interface with electrical isolation.
CAN-Bus isolation converter insulation voltage: DC 1500V.
Working temperature range from -40 to 85 °C.

RPi Screw Terminal Block Breakout Module with Aluminum Enclosure. With the adapter module you can easily extend Raspberry-Pi projects to industrial....
Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. Standard IDC40 pitch....
Support for Desktop, Panel mount, Wall-mount or DIN rail mount. DIN rail mount supports vertical or horizontal place mounting. Can support width 35mm....
Enclosure: High quality aluminum enclosure, thickness 1.5mm/0.06", with attractive and extremely durable powder coat painting and clear laser marking....
Packing list: 1x Terminal Block Board, 1x Aluminum enclosure(top and bottom covers), 2x DIN rail adapter Bracket, 4x Brass standoff, 5x M3x4mm Flat....

The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
CAN industrial automation control system.
The serial communication device is connected to CAN-bus.

Industrial device server with installable industrial protocols allow virtually any serial device to connect to a new or existing Ethernet network. Dimensions: 3.54"H x 1.4"W x 2.4"D..
High-impact plastic for durability. Media type supported: Twisted pair..
Connectivity: 10/100Base-TX Fast Ethernet, Data rates: 300 - 115200 bps, Characters: 7 or 8 data bits. Interfaces/ports: Network (RJ-45), RS-232/422/485 serial..
Form factor: DIN rail-mountable. Connector type: Terminal block (screw)..

Simple Power up 2 Passive 10/100Mbps PoE devices by one power source Application use for Access Points, IP cameras, IP phones, etc..
Power Input terminal block for all PoE power supply, each port serial a recoverable fuse(fuse value 1.1Amp / 72V). Power Expansion Output terminal....
Switch On/Off to save electricity while not use, LED indication for switch On/Off status..
Specifications: Terminal Block Power Input: 12VDC - 60VDC, maximum current 10Amp.
Termianl Block Expansion Output: maximum current 10Amp.
High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....

UNO Screw Terminal Block Breakout Module with Aluminum Enclosure. With the adapter module you can easily extend UNO projects to industrial control....
Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. Standard IDC40 pitch....
Support for Desktop, Panel mount, Wall-mount or DIN rail mount. DIN rail mount supports vertical or horizontal place mounting. Can support width 35mm....
Enclosure: High quality aluminum enclosure, thickness 1.5mm/0.06", with attractive and extremely durable powder coat painting and clear laser marking....
Packing list: 1x Terminal Block Board(assembled standoffs and screws), 1x Aluminum enclosure(top and bottom covers), 5x M3x4mm Flat head screws(for....

Secure mounting for SNAP I/O modules plus a SNAP brain or on-the-rack SNAP PAC controller.
Compatible with all SNAP PAC brains and R-series controllers, including Wired+Wireless models.
Handles analog, digital, and serial modules on the same rack.