Reviews Din Metric Fittings

AZUNO Hydraulic Grease Fittings, 240 Pieces SAE & Metric Grease Fitting Assortment with 120 PCS Grease Fitting Caps (Grease Fittings & Coupler)

  • 【240 Pieces Kit】 Total 240pcs includes 120pcs SAE and 120pcs METRIC. SAE packed with 6 kinds, 1/4” and 1/8” NPT in straight 45° and 90°. METRIC packed with 6 kinds, M6 and M8 NPT in straight 45° and 90° grease zerks..
  • 【Build to Last】Constructed from high-strength zinc-plated steel for extra strength and rust-resistance..
  • 【Tested and Certified】Meet and exceeds ISO/TS16949 certified and industry benchmark 48 Hours corrosion resistance tested..
  • 【Grease Zerk Caps】120pcs red and black grease fitting caps differentiated SAE and Metric fittings. Protect grease fittings from corrosion and contaminants..
  • 【Keep Organized with Durable Case】 Thick polypropylene (PP) case with double snap locks to keep secure of grease zerk assortment..
Check Stock

Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037

  • BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
  • Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
  • Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
  • Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
  • Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Check Stock

Electronics-Salon DIN Rail Mount 8 DPDT Signal Relay Interface Module. (Operating Voltage: DC 24V)

  • DIN Rail Mount 8 Channel DPDT Signal Relay Interface Module, DC 24V Version..
  • RYxxW-K high quality signal relays, LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass dual layers PCB..
  • Pitch 3.81mm / 0.15" screw terminal block, wire range 26-16AWG, strip length 5mm / 0.2", Metric M2 slotted screw..
  • Datasheet: https://images-na.ssl-images-amazon.com/images/I/A1vg1+5HA8L.pdf.
Check Stock

LockNLube Simple 90 Coupler

  • Rated to 10,000 PSI! Locks on, stays on. Does not leak once locked on..
  • Hands free - does not pop off under pressure. Easily release from fittings with the thumb lever, even at extreme pressure..
  • Fits all standard Grease Guns - 1/8 NPT fitting. Fits all SAE and Metric Zerk fittings. Simply replace your existing coupler..
  • Over 3.5" of reach. Great for shielded PTO shafts, axles, harvester heads, U Joints and other recessed grease fittings..
  • Includes rebuild kit. Easily replace seal and jaws without replacing the coupler..
Check Stock

DXDivers Scuba Tank Transfill Equalizer Hose with Pressure Gauge, PSI/BAR, DIN to DIN or Yoke to Yoke (DIN)

  • Transfer air to equalize between two scuba cylinders.
  • 60" Long with DIN to DIN or Yoke to Yoke.
  • Connect to both 200 Bar and 300 Bar scuba valves.
  • 2" pressure gauge provides dual readings in both imperial and metric.
Check Stock

M12-1.75 x 50mm Zinc-Plated 12.9 Alloy Steel Socket Head Cap Screw 50 pk.

  • Price For: Each Drive Type: Hex Socket System of Measurement: Metric Dia./Thread Size: M12-1.75 Screw Style: Socket Head Cap Screw Thread Dia.: M12 Fastener Thread Type: Metric Coarse Thread Direction: Right Hand Material Grade: Class 12.9 Item: Metric Socket Head Cap Screw Vented Hole Size: Not Vented Basic Material: Steel Min. Tensile Strength: 176, 900.
  • Head Height: 12mm Head Dia.: 18mm Rockwell Hardness: C39 to C44 Thread Style: Fully Threaded Screw Head Type: Cylindrical Thread Length: 50mm Screw Industry Standards: DIN 912 Drive Size: 10mm Fastener Finish: Zinc Plated Length: 50mm Country of Origin (subject to change): Multiple.
Check Stock

Performance Tool W5215 Performance Tool SAE/MET Grease Fitting Assortment - 70 Piece

  • METRIC FITTINGS: 6 mm – 1 Straight (10 pcs).
  • CASE: Convenient re-sealable container for storage and transport.
  • Overall size: 23 7/8-inch x 25-inch x 31-inch.
Check Stock

LockNLube Grease Gun Coupler XL - Extra reach for recessed grease fittings

  • Rated to 10,000 PSI! Locks on, stays on. Does not leak once locked on..
  • Hands free - does not pop off under pressure. Easily release from fittings with the thumb lever, even at extreme pressure..
  • Fits all standard Grease Guns - 1/8 NPT fitting. Fits all SAE and Metric Zerk fittings. Simply replace your existing coupler..
  • Over 3.5" of reach. Great for shielded PTO shafts, axles, harvester heads, U Joints and other recessed grease fittings..
  • Includes rebuild kit. Easily replace seal and jaws without replacing the coupler..
Check Stock

POHIR Pressure Washer Adapter Set, 14-Pack Quick Connect Fittings, 3/8 Power Washer Quick Disconnect Kit with M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release and M22 15mm to 14mm Male

  • 14-Pack Quick Connect Kit - 4-pieces Metric M22-14 female to 3/8 quick plug, 2-pieces m22 14mm female to 3/8 quick disconnect, 2-pieces M22 14mm male to 3/8’’ quick disconnect, 2-pieces M22 14mm male thread to m22 14/15 male, 2-pieces 3/4 female to 1/2 quick connect, 2-pieces 1/2 plug to 3/4 male.
  • Easy Connect & Disconnect - M22 quick connect fittings help pressure washer hose quick connect to pressure washer pump or gun. The 3/4 quick coupler fits all 3/4" GHT (garden hose thread) watering equipment..
  • M22 Male to Male - 1x M22 15mm male to 14mm male and 1x M22 14mm to 14mm male adapter, convert the metric M22 14mm male thread to the M22 14mm or 15mm swirl as needed..
  • High-Quality Brass Quick Connect - Made of solid brass, stainless steel and engineering plastics, for a safe and leak free connection. These quick connect fittings are durable, rust proof, providing secure fittings and are convenient for frequent connection. .
  • Warm Tips: Inner diameter of M22 -14 swivel is 14MM NOT 15mm. Do NOT use the threaded 14MM to connect M22-15mm fittings, or it will cause leakage. Please lubricate the accessories before use..
Check Stock

AZUNO Hydraulic Grease Fittings 240 Pieces SAE & Metric Grease Fitting Assortment with 120 PCS Grease Fitting Caps Standard Grease Gun Fittings Perfect for Replacing Missing or Broken Zerk Fitting

  • 【240 Pieces Kit】 Total 240pcs includes 120pcs SAE and 120pcs METRIC. SAE packed with 6 kinds, 1/4” and 1/8” NPT in straight 45° and 90°.....
  • 【Build to Last】Constructed from high-strength zinc-plated steel for extra strength and rust-resistance..
  • 【Tested and Certified】Meet and exceeds ISO/TS16949 certified and industry benchmark 48 Hours corrosion resistance tested..
  • 【Grease Zerk Caps】120pcs rend and black grease fitting caps differenciated SAE and METRIC fittings. Protect grease fittings from corrosion and....
  • 【Keep Organized with Durable Case】 Thick polypropylene (PP) case with double snap locks to keep secure of grease zerk assortment..
Check Stock