Reviews Digital Storage Oscilloscopes

Goupchn Universal P6100 Oscilloscope Clip Probes 100MHz with Accessories Kit 1X 10X 2 Pack

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 2 x probes, 8 x marker rings, 2 x ground wires, 2 x ic test protection caps, 1 x adjustment tool, 1 x user manual..
Check Stock

Goupchn Oscilloscope Clip Probes 200MHz Fully Insulated BNC End Probe with Accessories Kit 1X 10X

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 2 x probes, 16 x marker rings, 2 x ground wires, 4 x locating sleeves, 1 x adjustment tools, 1 x ground springs, 1 x user manuals, 1 x oscilloscope link adapters..
Check Stock

SIGLENT SPL2016 16-channel Logic Analyzer Probe for SIGLENT SDS2000X

  • Logic Probe for SDS2000 series , 16-channel, 500MSa/s.
  • Adds 16-channel digital input capability to Siglent SDS2000X, SDS2000XP and SDS5000X oscilloscopes.
  • Firmware license key required for operation (sold separately).
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe with Power Supply, (Assembled Finished Machine) EM001

  • 【SIMPLE DESIGN】ETEPOPN EM001 oscilloscope kit is an assembled finished machine that can be used directly to avoid assembly/soldering process problems and saving you a lot of time. The display and MCU are mounted on the same board (motherboard) to avoid the use of inter-board pinouts. The analog channels are placed on a separate board containing most user-installed parts, thus allowing better separation of analog and digital circuits..
  • 【UPGRADED VERSION】The sensitivity of the EM001 oscilloscopes has been extended both in width and height which is wider and higher than the others It reaches 5mV / div – 20V / div while the others is only 10mV / div – 5v / div..
  • 【HAND-HELD】This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop..
  • 【ROTARY ENCODER】It has been added the rotary encoder makes parameter adjustment more quicker and easier..
  • 【WHAT YOU GET】You will get an assembled mini oscilloscope, BNC clip cable, and a power supply. Detailed operating instructions (troubleshooting guide) and schematics are also provided. If you have any questions about this digital oscilloscope, you can always contact us and we will reply within 24 hours..
Check Stock

Micsig Oscilloscope Probe CP2100A AC/DC Current Probe 800KHz 10A/100A with Standard BNC Interface

  • The CP2100A Oscilloscope Probe has automatic and manual zero adjustment modes, it can also perform zeroing and demagnetization automatically or manually. Bandwidths up to 800KHz..
  • The split design makes the probe small and exquisite , easy to carry and use..
  • This CP2100A Current Probe can be powered by Oscilloscopes USB port and doesn't require any extra power supply..
  • It comes with a standard BNC interface, applicable to all BNC interface oscilloscopes. It also can be used with a multimeter after adding the suitable adapter..
  • Satisfaction Guarantee: We offer a 1-year manufacturer’s warranty and lifetime customer support for this product..
Check Stock

OWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector

  • ...he current clamp on (power LED should light) and then clamp the jaws around the current carrying conductor as shown. Typical Uses The AC/DC Current Probe simply offers the best value for money without compromising resolution..
  • ¡¾Multiple Test Ranges¡¿The OWON CP-05+ current clamp is ideal for use with automotive oscilloscopes for measuring currents between 1 mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy..
  • ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required. These current clamps have been designed for use with oscilloscopes..
  • ¡¾Portable¡¿Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your AC/DC Current Probe. Auto zero at power on, relative zero correction .Low noise level, and high detection accuracy. 100% money back guarantee & 1YE....
Check Stock

CUEA Oscilloscope Bag, Oscilloscope Accessory, Black Mini Light Weight 8.9X6.9X2.7In for Oscilloscope Home School Storage Bag

  • It is a portable storage case tailored for miniDSO range of oscilloscopes. Can be compatible with a variety of host for DS203, DS211, DS212, DS213, LA104 and so on..
  • And designed a separate position for the host, the host and accessories are separately stored. In addition to the standard accessories, this storage bag can also be designed to accommodate ignition high voltage probes, data cables, chargers, etc..
  • Exquisite workmanship, reliable quality, easy to , can protect your instrument from scratches and damage..
  • Small in size, light in weight, take up no space, easy to carry, good protection..
  • Made of high quality Nylon Oxford cloth and EVA material, it is durable, wear resistant, and anti-aging..
Check Stock

Goupchn 500Mhz Oscilloscope Clip Probe 10x P6500B High Precision with Adjust Tool Accessory Kit

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • P6500B probe is a 500MHz oscilloscope probe with a switch for 10x attenuation. It is a good oscilloscope accessory and suitable for BNC interface oscilloscopes..
  • Probe can be used in professional test equipment. It has a 1.3m cable with standard BNC end. It has stable performance and provides several accessories. Adjustment tool can adjust compensation capacitance to match oscilloscopes. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Package include: 1 x probe, 8 x marker rings, 1 x ground wire, 1 x retractable hook tip, 1 x adjustment tool, 1 x ground spring, 1 x BNC adapter..
  • Warranty: Hope you can be satisfied with our oscilloscope probes. We provide guarantee of a 30-day replacement or refund for any problem and 1 year warranty. If you have any question, feel free to contact us..
Check Stock

Passive Attenuator, 1.053M Input Res HT201 Converter Passive Attenuator 20:1 Passive Oscilloscope Signal Attenuator for Inductive Signal Primary Ignition, Automotive Diagnostics Use

  • 20:1 OSCILLOSCOPE PASSIVE ATTENUATOR: Can be used with most oscilloscopes to measure injector and primary ignition waveforms. Note that this attenuator should not be used for any high pressure measurements other than injectors and primary igniters.
  • PASSIVE 20:1 ATTENUATOR: If input 20V signal, it can output 1V signal. Since the signal is attenuated, using this project, the oscilloscope can measure voltages above its range (±20V).
  • MEASUREMENT RANGE: Due to signal attenuation, using this item, the HT201 attenuator can measure voltages above its range (±20V).
  • PRODUCT FEATURES: It provides enhanced input overload protection when used in oscilloscopes to measure inductive signals, such as nozzles and primary ignition. Do not use it for secondary ignition tests.
  • AFTER SALES & SERVICE: If for some reason you are not satisfied with your purchase, damaged, damaged in shipping or even changed your mind. Please feel free to contact us, we will be happy to answer your questions.
Check Stock

Micsig Oscilloscope AC/DC Current Probes with Standard BNC Interface CP2100

  • Maximum measurable current：100Apk（70Arms）.
  • Overload indication：Buzzer beeps, Light flashes.
  • Compatible with all BNC-connected oscilloscopes, adapters can also work with multimeters..
Check Stock