Reviews Differential Mode Filter

Taidacent THS4131 Fully Differential Input/Output Low Noise Amplifier Module Single Ended to Differential Single Ended Input Double Ended Output

  • Name: THS4131 Fully Differential Amplifier Size: 45mm X 34mm Supply Voltage Range: 5V Single Supply ±15V Dual Supply.
  • This module can implement single-ended to differential, single-ended input, and double-ended output. Has high performance, low noise, wide power supply voltage range and other advantages..
  • The THS413x consists of a true fully differential signal path from input to output. This design produced excellent common-mode noise suppression wells that improved total harmonic distortion..
  • Chip features High performance 150 MHz - 3 dB bandwidth (VCC = ±15V) 51V/us slew rate -100dB third harmonic distortion (250kHz) 2. Low noise 1.3 nV/vHz Input Reference Noise Differential input/cent output Balanced Output Suppresses Common Mode Noise Reduce second harmonic distortion from dry differential output.
  • Wide supply voltage range VCC-5 V Single Supply to ±15V Dual Supply ICC (SD) = 860 u A Shutdown Mode (THS4130) Chip application Single-ended to differential conversion Differential ADC Driver Differential antialiasing Differential transmitters and receivers Output Level Translator.
Check Stock

Braeburn 2000NC Value 5-2 Day Programmable 1H / 1C

  • 5-2 day separate weekday/weekend programming, bright blue display backlight.
  • Adjustable temperature limits, hardwire or battery powered, permanent memory retains settings, filter check monitor.
  • Adjustable temperature differential, adaptive recovery mode (arm ), separate O & B terminals.
  • Meets energy aware guidelines*, ESD guard electronic circuitry, low battery indication,compressor short cycle protection.
  • Temporary program override, programmable extended hold mode, front access reset button, F˚/C˚ switch, gas/electric Fan switch.
Check Stock

MidOpt Near-IR Bandpass Filter for Machine Vision, BP Series, Broad Bandwidth, BP850-30.5, Fits M30.5 Lens Filter Thread

  • 【Product Description】: This power line EMI filter terminal is a high performance power supply EMI filter, which uses for most digital devices (especially switching power supplies) for suppressing continuous and intermittent pulse interference.
  • 【Wonderful Features】: Our universal power wire filter terminal has good common mode and differential mode suppression characteristics, which is suitable for white household appliances with inverter and inverter for control system.
  • 【Main Effect】: The main effect of this power EMI filter terminal is to improve the stability of the equipment and prolong the service life of the equipment, so this Power line EMI filter is an ideal choice for you.
  • 【Wide Range of Applications】: Our 20A power EMI filter terminal is universal, compact. And this 115V/250V power line EMI filter is very easy to install, which is also suitable for mechanical equipment, treadmills, medical device, etc.
  • 【Stability】: The performance of our noise suppressor power EMI filter module is stable, which can effectively improve the working stability of other equipment, so users can rest assured to possess and use.
Check Stock

Rockville Krypton F1 1600w Peak / 400w RMS 4 Channel Amplifier Car Audio Amp

  • Rockville KRYPTON F1 1600w Peak / 400w Dyno-Certified RMS 4 Channel Amplifier Car Audio Amp..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 100 Watts x 4 Channels 003c1% THD+N. 4 Ohm: 70 Watts x 4 Channels 003c1% THD+N..
  • 4 Ohm Bridged: 200 Watts x 2 Channel. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 2 Ohm: 400 Watts x 4 Channels. 4 Ohm: 280 Watts x 4 Channels. 4 Ohm Bridged: 800 Watts x 2 Channels..
  • All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers. All channels on the amplifier are bridgeable. Digital Voltage Display on Amp. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry..
  • Adjustable Subsonic Filter: 15Hz -40Hz (This filter is on the HPF knob). Adjustable Low Pass Filter: 40Hz – 4KHz. Adjustable Band Pass Filter: 15 Hz - 4 kHz (use both the HPF and LPF filter). Adjustable High Pass (Subsonic) Filter: 15 Hz - 4 kHz. 2CH/4CH Input Mode Switch. 8 Volt Preamp Circuitry.
Check Stock

(2)Rockville RSG12 12 3Way 1000 Watt 8Ohm Passive DJ PA Speaker +Stands +Cables

  • ...us Mode LED Indicator, 8 Volt Preamp Circuitry, RCA Line Output, Bluetooth On and Off Mode Switch, 2CH/4CH Input Mode Switch, Mute and Delay Soft Start System, Adjustable Input Level Control, Fully Adjustable 12dB Bass Equalizer, Full IC-Controlled Protection Circuitry, Fully Adjustable 12dB / Octave Crossover with Differential Circuitry, Studio-Grade Bipolar Output Stage Transistors..
Check Stock

EMB Professional Sound System EB631EQ Graphic Equalizer

  • TRS or XLR balanced inputs and outputs differential / Choice of stereo or the sum of the synthesis of left and right channel subwoofer.
  • X10 range are two-channel selector switch / Two channels have 40Hz high pass filter (low cut).
  • All outputs with phase reverse switch / The output of all bands can be independently adjusted average.
  • 24dB/Unkwitz-Riley filters (the professional standard) - Stereo / Mono status indication LEO lights, indicating that the mode selection unit.
Check Stock

PIONEER 5CH AMP/100X4+600W/BASSBOOST REM

  • Rockville RXD-M0 1200 Watt / 600 Watt RMS Mono Class D 1 Ohm Car Stereo Amplifier with Optical Coupler Technology. CEA Compliant Power Ratings : (Rated at less than 1 % distortion).
  • 1 Ohm : 1200 Watts x 1 Channel . 2 Ohm : 800 Watts x 1 Channel. 4 Ohm : 600 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Studio-Grade Bipolar Output Stage Transistors ..
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter : 50Hz - 250Hz. Subsonic Filter : 15Hz - 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control..
  • 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power : < 0.05%. S / N Ratio : >100dB. Frequency Response : 10Hz - 500KHz. Damping Factor : > 200 @ 100Hz. 50 Amp Maxi Fuse. Dimensions : (W x H x L) 8.5" x 1.8" x 12.5"..
Check Stock

Rockville dB10 800w Peak Mono Car Audio Amplifier 200w RMS @ 4 Ohms CEA Rated

  • Rockville dB10 800 Watt/400 Watt RMS Mono Class-D 4-Ohm Amplifier. CEA Compliant Power Rating @ 4 Ohm: 200 Watts x 1 Channel. RMS Power Rating @ 4 Ohm: 400 Watts x 1 Channel. Peak Power Rating @ 4 Ohm: 800 Watts x 1 Channel. High-Speed MOSFET Power Supply..
  • Minimum THD at Rated Power: 90dB. Under Voltage Protection: 10V. Over Voltage Protection: 16V. Frequency Response: 15 Hz – 250 Hz..
  • Damping Factor: >60 @ 100Hz. Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50 Hz – 250 Hz. Subsonic Filter: 15 Hz – 55 Hz..
  • Phase Control. Full IC-Controlled Protection Circuitry. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. Status Mode LED Indicator..
  • 25 Amp ATO Fuse. Product Dimensions: (L x W x H) 7.7″ x 5.5″ x 2.0″. Product Weight: 4.4 Lbs..
Check Stock

Rockville Rxd-m0 1200 Watt/600W RMS Mono Class D 1 Ohm Amplifier Car Audio Amp

  • Rockville RXD-M0 1200 Watt / 600 Watt RMS Mono Class D 1 Ohm Car Stereo Amplifier with Optical Coupler Technology. CEA Compliant Power Ratings : (Rated at less than 1 % distortion).
  • 1 Ohm : 1200 Watts x 1 Channel . 2 Ohm : 800 Watts x 1 Channel. 4 Ohm : 600 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Studio-Grade Bipolar Output Stage Transistors ..
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter : 50Hz - 250Hz. Subsonic Filter : 15Hz - 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control..
  • 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power : < 0.05%. S / N Ratio : >100dB. Frequency Response : 10Hz - 500KHz. Damping Factor : > 200 @ 100Hz. 50 Amp Maxi Fuse. Dimensions : (W x H x L) 8.5" x 1.8" x 12.5"..
Check Stock

Ingersoll Rand - 24233280 Compressed Air In-Line Filter FA40IG 1/2 Inlet SCFM 22 Beige

  • Accurate Information: Patented dual indicator shows differential pressure drop and operating efficiency.
  • General protection with particle removal down to 1 micron, including coalesced liquid, water, and oil, providing a maximum remaining oil aerosol content of 0.1 mg/m3 (0.1 ppm) at 21°C (60°F).
  • Engineered to deliver low pressure drop throughout the life of the filter, reducing energy costs in your facility.
  • Patented dual indicator shows differential pressure drop and economical operating efficiency.
  • Smooth bore flow insert directs air into the filter element to minimize turbulence and pressure losses.
Check Stock