Reviews Differential Axle

ARB 750001 Competition Differential Cover for DANA 50/60 ideal for increasing the rigidity of the whole axe and protect the differential and ring and pinion set from any off-road hazards

  • WHY BUYING ARB 750001 DIFFERENTIAL COVER FOR DANA 50/60: When off-road, it is inevitable that obstacles and off-road hazards will be encountered that could potentially inflict expensive damage to your differential. To prevent this, ARB manufactures the Differential Cover. Using high tensile nodular iron, it has been engineered to protect the differential and ring and pinion set from any off-road hazards..
  • IMPORTANT ARB 750001 FEATURES: Computer-optimized cross brace design increases the structural rigidity of the axle / Top quality neodymium magnets / Prolonged carrier bearing life / Magnet location in the end of the dipstick.
  • BEST ARB DIFFERENTIAL COVER OF ALL: Computer-optimized cross brace design increases the structural rigidity of the whole axle / Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles / Prolonged carrier bearing life due to extra support to the bearing alignment / Top-quality, high-power neodymium magnets are used in both the drain plug and the dipstick to collect metallic wear particles as the vehicle moves.
Check Stock

Eaton 912A585 Detroit Truetrac 27 Spline Differential for Dana 30

  • Ring Gear Size: 7.2 IN, Ring Gear Ratio: 3.73 & up.
  • Catalog Notes: Applies to non-disconnect only.
Check Stock

Handwheel Off-Line Controller, DDCSV3.1 4 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit for CNC Control

  • 16 opto isolated digital inputs,3 opto isolated digital outputs. ARM9 main control chip,FPGA core algorithm chip..
  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version..
  • 4 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle..
  • Handwheel Three Output:Voltage, Single-Ended, Differential.
  • USB flash disk support for G code file input,no size limited of the G-code file..
Check Stock

DV8 Offroad | Rear Differential Skid Plate for 2018 - Current Wrangler JL | Fits Dana 44 Axle | Pumpkin and Tube Protection | 100% Bolt on Installation | SPJL-10

  • FITMENT: Compatible with 2018 - Current Jeep Wrangler JL.
  • ADDED SECURITY: Designed to be an additional barrier between your axle housing and any offroad elements that might try to cause some harm.
  • DESIGN: Form fitting split channel wrap with arching mount brackets that wraps the differential housing and axle tube in a second covering for additional strength and protection.
  • BUILT TO LAST: Manufactured from precision cut, machine bent steel for strength then robotically welded for rigidity.
  • EVERLASTING BEAUTY: Protected in a textured powder coat finish with corrosion and UV protection additives for durability and can be left as is or sanded down and painted to match.
  • SIMPLE INSTALLATION: No drilling required to install along the axle but a second set of hands will be found appreciative.
  • INSTALLATION NOTE: May not work with aftermarket large differential covers.
Check Stock

6602 Differential Deflecting Bearing Preload Wrench fit for Chrysler/Dodge Vehicles Axle Tube Quick Delivery Equipment Hand Tools

  • Fit for: Works on Chrysler/Dodge vehicles with 7-1/4, 8-1/4, 8-3/4, and 9-1/4 rear axles.
  • This tool is able to loosen the differential bearing adjusters inside the housing through the axle tube ( you need to use with socket).
  • Made of standard No.1045 steel with high strength and toughness for durability and perfect match.
  • It will perfectly fit inside axle tube to access the threaded adjusters with sleek design, and there is about 6″ of heat shrink on the wrench-end which protects the oil seal and wheel bearing from damage when using.
  • Package included: 1pcs Differential Bearing Preload Wrench ( 2 year warranty).
Check Stock

BTSHUB Silent Bearing Puller Kit Dent Puller Set, Differential Rear Axle Bush Tools Mount Bushing Kit for BMW E36/46, E38/39, E60/61, E31,E90/91

  • DIFFERENTIAL & AXLE BUSH TOOLS: This axle bush tool set is ideal for removing and installing ball joints, bushes and bearings for numerous BMW models from 1 Series to 8 Series..
  • APPICATION: Suitable for vehicles from BMW, 1 Series models, for example, E81, E87.
  • 3 Series E36, E46, E83, E90, E91, E92, E93.
  • 8 Series models E31, E85 Z4 models, E86, and S R53 model.
  • PROFESSIONAL GRADE QUALITY AND DURABILITY:Made of heavy-duty alloy construction, which has high hardness and good toughness. High quality and designed for long life in daily workshop use.
  • FEATURES: Including differential and axle bush tools, this is a comprehensive kit to renew the ball joints and bearings in the rear wheel carrier, longitudinal arms and rear axle, etc. A 8.9" feed rod for actuating the Silent bearing inserts with thread M12 x 0.06" long, at the end of the spindle with thread M12 x 0.06" short.
  • EASY FOR STOREAGE: Comes with a premium well-organized box for easy storage and transport. All thread repai....
Check Stock

Rancho RockGEAR RS6212 Skid Plate

  • COMPATIBILITY -- Works with OE and most aftermarket differential covers on Jeep Wrangler JK, Dana 44.
  • BUILT FOR THE TRAIL -- Protects differential casting from rocks and other obstacles while off-roading, rock crawling and trail riding.
  • GLIDES OVER OBSTACLES -- Mounts to Dana 44 front axle casting for a much smoother glide over obstacles both forward and backward.
  • RESISTS CORROSION -- Durable red powder-coat finish resists rust and corrosion.
  • ENGINEERED TO LAST -- Features 0.25-in. high-strength, low-alloy steel construction for long-lasting strength.
Check Stock

Rancho RockGEAR RS6242 Skid Plate

  • COMPATIBILITY -- Works with OE and most aftermarket differential covers on Jeep Wrangler JK, Dana 44.
  • BUILT FOR THE TRAIL -- Protects differential casting from rocks and other obstacles while off-roading, rock crawling and trail riding.
  • GLIDES OVER OBSTACLES -- Mounts to Dana 44 rear axle casting for a much smoother glide over obstacles both forward and backward.
  • RESISTS CORROSION -- Durable red powder-coat finish resists rust and corrosion.
  • ENGINEERED TO LAST -- Features 0.25-in. high-strength, low-alloy steel construction for long-lasting strength.
Check Stock

A-Premium Rear Complete Drive Shaft Prop Shaft Driveshaft Assembly Compatible with Ford F-150 2004-2008, Lobo 2007-2008, RWD, Replace# 8L3Z4R602E

  • [Vehicle Fitment-1]: Compatible with Ford F-150 2006-2008 V6 4.2L(144.5 Inch Wheelbase), Compatible with F-150 2005 V6 4.2L(144.7 Inch Wheelbase) --- RWD.
  • [Vehicle Fitment-2]: Compatible with Ford F-150 2006-2008 V8 4.6L(144.5 Inch Wheelbase), Compatible with F-150 2004-2005 V8 4.6L(144.7 Inch Wheelbase), Lobo (Mexico) 2007-2008 V8 4.6L(145 Inch Wheelbase)---RWD.
  • [Reference Number]: 936-803, 65-2013, 936803, 652013, 8L3Z4R602E.
  • [Product Description]: ①Length: 92 inch.
  • [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee.
  • Being sturdy and brand-new, this drive shaft is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

Lubegard 60902 Automatic Transmission Fluid Protectant, 10 oz. , RED

  • Rear Drive Shaft Axle Assembly For 2004-2008 Ford F-150 RWD 4.2L 4.6L 144.7 or 144.5 Wheel base, w/10 Bolt Differential Cover.
  • Shaft Length Compressed (in): 90 3/4" | Shaft Diameter (in): 2-7/8 Inch | Measure the Length to Confirm before Order.
  • This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints..
  • Ready to install - this drive shaft arrives pre-balanced to make installation quick and simple.
  • 100% new - this drive shaft is made from all new components so there's no core charge or return hassle.
Check Stock