Reviews Die Casting Mould Making

4 Pack Tray Silicone Molds

  • ...u will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 10.5 cm/....
Check Stock

ZHHOOHAG Resin Moulds Cobble Stone Wall Line Grain Shape Silicone Printing Texture Mat Resin Moulds Silicone

  • The surface of the mould is smooth, which can help the object to disengage from the mold quickly and ensure the integrity of its shapes..
  • Easy to use and clean put the filling into a mold and put it Then take mold out after a period of time, you just need to gently press on the bottom of the mould, the filling will jump out, not leaving a residue.
  • After using it, you can put it in the dishwasher or wash it by hand..
  • Multiple application the chocolate cake mold can be applied to making chocolates, soap, cake, bread, jelly, etc., making your food attractive and adding flavor to your food..
  • Reuseable DIY Molds Garden Planter Vase Ashtray Mould is Reusable, non-stick.
  • Easy use and clean. Flexible yet easy to maintaining shape in long run..
  • What Material Applicable Silicone Ice Shot Glass Molds compatible with most resins or other casting materials, can be used to as cement, plaster, concrete, plaster, soap, candle, polyester resin molding tool..
Check Stock

5 Pieces Maple Leaf Jewelry Resin Moulds Spice Silicone Mould and Lighter Protective Cover Epoxy Mould Set for DIY Crafts Resin Casting Candle Wax Soap Making Projects Supplies

  • What's included: the package contains 5 pieces resin casting moulds, including 1 piece maple leaf jewelry mould and 2 pieces (1 pair) spice grinder resin moulds and 2 pieces lighter protective cover resin moulds in two size, enough for you to apply and satisfy your various needs.
  • Nice material: these epoxy moulds are made of silicone, which are reliable and easy to release materials, and the mould is not easy to get deformed, washable, please pay attention to blending ratio when adjusting glue.
  • Dimension: the size of maple leaf jewelry mould is approx. 16 x 18 cm/ 6.3 x 7 inches, the diameter of spice grinder resin mould is approx. 6 cm/ 2.4 inches, the size of lighter protective cover resin mould is approx. 6.6 x 3.5 x 2.5 cm/ 2.6 x 1.4 x 0.98 inch and 5.2 x 3.5 x 2.5 cm/ 2 x 1.4 x 0.98 inch, proper sizes are simple for you to operate.
  • How to use: you just need to twist the silicone mould and release your items out of the mould after the resin is completely dry and solidified, no tearing while the mould maintains its shape, so convenient for your DIY crafts.
  • Design your styles: our epoxy casting moulds provide interesting DIY ways for you to make, you can add some dry flowers, sequins, powder or pigments of various colors into the resin mould, or add a ....
Check Stock

Artmolds High Grade Stainless Steel Powder - Easy Cold Casting Formula with Polyurethane Resin for Making Sculptures | Home and Office Decors - 1lb/350 Mesh

  • A Quality Product: Our Art molds Stainless Steel Powders of high grade 350 Mesh and the craft stays lighter and long time.
  • Perfect for Cold Casting: Our Art molds Stainless Steel Powder high grade powder comes with uncoated spherical particles for cold casting creates the look of pewter and making sculptures and Stainless Steel Powder maiden art and crafts.
  • Easy to Use: Our Art molds Stainless Steel Powder high grade powder is an Easy cold casting formula using polyurethane resin. Just combine, mix well and pour into mold.
  • Multipurpose Usages: Our Art molds Stainless Steel Powder high grade powder can be use in the multipurpose activities like slow flash, powder coating, glitter formulas making sculptures, Home and office decors and many more.
  • Mould your Creativity into a Shape: Try our Art molds high grade cold casting Stainless Steel Powder at your home and office decors and enhance your creativity level and feel artistic.
Check Stock

7 Pieces Silicone Resin Casting Moulds Set, Include 2 Universal Lighter Protective Cover Resin Mould Square Coaster Silicone Mould Spice Grinder Epoxy Mould for DIY Craft

  • Package quantity: package comes with 5 pieces silicone resin casting moulds, including 2 x universal lighter protective cover resin mould, 1 x square coaster silicone mould, 1 set of spice grinder epoxy mould, enough for you to make desired crafts.
  • Size detail: the universal lighter protective cover resin mould measures approx. 6.6 x 3.5 cm and 5.2 x 3.5 cm, the square mould is about 9.5 cm in diameter, and the grinder epoxy mould is about 6 cm in diameter, please allow a little error on the size due to manual measurement.
  • Durable material: these resin casting moulds are made of durable silicone material, not easy to break, durable to serve you for long time, and with smooth interiors, reducing the need to cut back and polish the finished resin crafts, easy to release after the resin is fully cured.
  • DIY you own craft: these epoxy DIY moulds are compatible with epoxy resin, wax, soap and other materials, add some sequins, resin dyes, dried flowers and other decors into the mould, to make practical coasters, cup mats, wall decorations, hanging ornaments, home table decors, art works and other DIY projects.
  • Nice gift choice: you can send our silicone resin moulds set to others who are DIY lovers as gifts, or send the finished products to your lover, friends....
Check Stock

DND Dice Mold Silicone 7 Standard Polyhedral Sharp Edge Dice Slab Mould for D&D, Tabletop RPG

  • ...asy to use and popped out of the mold smoothly. It allows you to be as creative as one can be, and then some more! Less bubbles, way easier, and much neater, a super easy mold to use for a beginner!.
  • 7 POLYHEDRAL STANDARD DICE SET - This reusable mould is perfect for resin casting and making a full 7 piece set of dnd dice (1 D4, 1 D6, 1 D8, 2 D10s (0-9 and 00-90), 1 D12, and 1 D20). This mold will give you smooth, shiny, sharp-edged dice, with all numbers intact..
  • WORKS WITH VARIOUS MATERIALS - Our silicone rubber dice mold can be used with many materials, such as epoxy resin, polyester resin, polyurethane resin, wax, soap, precious metal clay, fimo clay, concrete, cement and more. Happy dice making!.
Check Stock

Zevipe 6pcs Jewelry Wax Hole Tube Moulding Carving Wax Ring Casting Mold Wax

  • Length is 14.6 cm, 6PCS Include T100,T150,T200,T250,T1062,T1062E,.
  • Wax with Hole Can Be Carved / Shaped and Reproduced to Other Ring Mould.
  • The Size Details are in the Description,Wax Color Would Be Green or Blue.
  • Previous Quality Casting Wax Hole for Jewelry,If You Want Other Shape Carving Wax Ring Tube/Lost Wax Casting Kit/Wax Carving.Please Search In Our Store,We Also Have Solid Wax Tube.
  • Zevipe Manufactured this Wax Mould Tube in Wax Factory Which We Checked its Quality,Nice as Famous Brand Wax Ring Jewelry..for Casting Ring Mold.So We Choose it for You.
Check Stock

7pcs Silicone Resin Molds for Epoxy Resin Casting Molds Dice Fillet Square Triangle Dice Art Resin Moulds for DIY Jewelry Craft Making Digital Game

  • ...asy to use and popped out of the mold smoothly. It allows you to be as creative as one can be, and then some more! Less bubbles, way easier, and much neater, a super easy mold to use for a beginner!.
  • 7 POLYHEDRAL STANDARD DICE SET - This reusable mould is perfect for resin casting and making a full 7 piece set of dnd dice (1 D4, 1 D6, 1 D8, 2 D10s (0-9 and 00-90), 1 D12, and 1 D20). This mold will give you smooth, shiny, sharp-edged dice, with all numbers intact..
  • WORKS WITH VARIOUS MATERIALS - Our silicone rubber dice mold can be used with many materials, such as epoxy resin, polyester resin, polyurethane resin, wax, soap, precious metal clay, fimo clay, concrete, cement and more. Happy dice making!.
Check Stock

RONRONS Rainbow Arch Candle Silicone Mold Geometric U Shaped Striped Fondant Bread Making Mold Cake Cupcake Toppers Decorating Polymer Clay Epoxy Resin Casting Plaster Mould for Home Decoration

  • ...a while, after the resin is fully solidified, gently twist the mould and the piece can be easily pushed out, no tear while maintain the mold shape.
  • After use, wash it with soap water and store it away from direct sunlight and dust.
  • 【Widely used】These silicone pillar molds are compatible with most resins or other casting materials such as epoxy resin, soap, candle, wax. Perfect for DIY handmade crafts, you can create a lovely candle, soap, cake topper, bread, home decorating or crystal craft for your friends, parents or yourself..
  • 【How to use】Step 1, pour casting material into the resin mold and slowly stir, wait until the material is fully solidified.
  • Step 2, twist the mold and release your craft, you will get a craft with nice shape and glossy surface.
  • Step 3, after using, just wash and store the mold for next time.
Check Stock

3 Pieces Heart Star Cross Graphite Casting Ingot Mold Metal Refining Scrap Melting Casting Mould for Smelting Gold Silver Metal Aluminum Copper Brass Zinc

  • Quality Graphite Material: made of quality graphite material, the ingot molds won't affect the metal purity during the metal refining process.
  • Fast cold and hot conditions, with good thermal stability, producing exquisite refining effect for you.
  • Detailed Size Information: the outside dimension of heart graphite casting mold is about 50 x 50 x 20 mm/ 1.97 x 1.97 x 0.79 inch, the inner is about 10 mm high.
  • The cross graphite casting mold is about 88 x 47 x 8 mm/ 3.45 x 1.85 x 0.31 inch, the inner is 63 x 38 x 4 mm/ 2.48 x 1.5 x 0.16 inch.
  • The star graphite casting mold is 50 mm/ 1.97 inches in length and width, 11.45 mm/ 0.45 inch on each side, proper in size for you to cast metal and make your own jewelry.
  • Good Performance: the graphite molds for casting metal has nice thermal stability, which can withstand 2000 degrees Celsius, shorten the melting time and save energy, has good impact resistance and corrosion resistance to acid and alkali, good in performance to ensure the reliability of product quality.
  • A Wide Range of Application: the casting ingot mold has a wide range of application, suitable for experiments and melting of non ferrous metals, such as gold and silver, brass, copper, aluminum, zinc and so on, they can also be applied for test analysi....
Check Stock