Reviews Dicom Preset Mode

Fender Mustang GTX-7 Footswitch

  • BANK UP/ DOWN SWITCH: Functions in Preset Mode.
  • Pressing switch and releasing will bank up by 5 presets, press and hold will bank down by 5 presets.
  • Pressing switch and releasing will switch between three of the modes (Looper, Effects, Presets).
  • press and hold will switch to Tuner mode.
  • Five numbered buttons enable selection and foot control of the different functions depending on selected mode..
  • DISPLAY SCREEN: Shows preset selected, effects mode and tuner..
  • These three LEDs at far right indicate which of three modes is in use – Looper (Green), Effects (Amber), and Presets (Red)..
Check Stock

VANPO Digital Torque Wrench 3/8 Inch drive(5-99.5 ft-lbs./6.8-135Nm), ±2% Torque Accuracy, Electronic Torque Wrench with Preset Value, Buzzer and LED Indicator, Small Torque Wrench Set for Bike Moto

  • 【Preset Mode】 (Upgrade) This torque wrench adds a preset mode, which can preset 6 sets of values in advance. Frequently used values are set for each section, which is convenient even when switching to adjacent values. For bicycles, motorcycles and mechanical equipment, etc..
  • 【Memory Mode】 This digital torque wrench provides Track and Peak modes. In Track mode, a balanced force can be applied by changing the value of the display. Added 500 sets of data storage function, the torque value generated will be recorded in Peak mode, which is convenient for you to check at any time..
  • 【Measurement Mode】The electric torque wrench has four measurement modes: kg-cm, Nm, in-lb, ft-lb. Only need simple operation, you can clearly see the numerical conversion between the measurement units through the display screen. It will meet the switching use between the measurement units according to different situations..
  • 【Reminder Mode】 When using the 3/8 drive torque wrench to reach the preset torque value, a rapid buzzer will sound, and the LED light will change from a flashing green light to a solid red light. The reminder can effectively avoid screw damage caused by excessive force..
  • 【Quick release and high precision】This small torque wrench can easily and....
Check Stock

NEC 48 LCD Commercial Monitor LED Display P484

  • ...klight - edge-lit| Image Contrast Ratio: 4000:1| Brightness: 700 cd/mý| Viewing Angle: 178 degrees| Viewing Angle (Vertical): 178 degrees| Response Time: 8 ms.
  • Additional Features: TileMatrix (10 x 10), Open Pluggable Specification slot, Carbon Footprint Meter, AMX Beacon Compatible, 24/7 Scheduler, 10-bit support, DICOM support, PJLink, Raspberry Pi Compute Module Compatible, SpectraView Engine support, Crestron Roomview support| Stand: Optional| Flat Panel Mount Interface: 300 x 300 mm| Supported Memory Cards: microSD| USB Port: Yes| USB Ports Qty: 3| Type: Standard remote| Speaker System: 2 speakers.
  • Output Power / Total: 20 Watt| External Speakers Amplifier Power (Total): 30 Watt| Speakers: 2 x main channel speaker - built-in - 10 Watt| Connectivity: LAN, NFC| LAN Protocol: Fast Ethernet| Connector Type: DVI-D input - bottom Ý HDMI input - bottom Ý HDMI - bottom Ý 2 x DisplayPort input - bottom Ý DisplayPort output - bottom Ý VGA input - bottom Ý 2 x audio line-in - bottom Ý 2 x speakers output - side Ý Audio output - side Ý 3 x USB 2.0 - side Ý Service -.
  • Included Accessories: Batteries, mounting screws| Cables Included: DVI cable - 6 ft| ENERGY STAR Qualified: Yes| ENERGY STAR Version: 7.0| Power Device: Power supply| Nominal Voltage: A....
Check Stock

Frigidaire FFRE103WAE Window Air Conditioner, 10,000 BTU, White

  • Multi-Speed Fan: Features three different fan speeds, for more cooling flexibility.
  • Energy Saver Mode: Reduce your utility bills in this mode. It cools similarly to central air, with the unit turning on and off at different intervals to ensure the room stays at the set temperature.
  • Sleep Mode: Maximum comfort throughout the evening hours with the added benefit of energy savings. With Sleep Mode, the temperature gradually increases a few degrees over the evening.
  • Programmable 24-Hour On/Off Timer: Customize times to fit your schedule for immediate comfort when you get home. The built in timer allows you to preset the unit to turn on and off in half hour increments.
  • Effortless Temperature Control: Our air conditioners maintain the preset room temperature, so you will remain comfortable at all times.
Check Stock

NEC EA271U-BK 27.4" 4K UHD Business-Class Widescreen Desktop Monitor,BLACK

  • ...0:1| Brightness: 700 cd/mý| Viewing Angle: 178 degrees| Viewing Angle (Vertical): 178 degrees| Response Time: 8 ms.
  • Additional Features: TileMatrix (10 x 10), Open Pluggable Specification slot, Carbon Footprint Meter, AMX Beacon Compatible, 24/7 Scheduler, 10-bit support, DICOM support, PJLink, Raspberry Pi Compute Module Compatible, SpectraView Engine support, Crestron Roomview support| Stand: Optional| Flat Panel Mount Interface: 300 x 300 mm| Supported Memory Cards: microSD| USB Port: Yes| USB Ports Qty: 3| Type: Standard remote| Speaker System: 2 speakers.
  • Output Power / Total: 20 Watt| External Speakers Amplifier Power (Total): 30 Watt| Speakers: 2 x main channel speaker - built-in - 10 Watt| Connectivity: LAN, NFC| LAN Protocol: Fast Ethernet| Connector Type: DVI-D input - bottom Ý HDMI input - bottom Ý HDMI - bottom Ý 2 x DisplayPort input - bottom Ý DisplayPort output - bottom Ý VGA input - bottom Ý 2 x audio line-in - bottom Ý 2 x speakers output - side Ý Audio output - side Ý 3 x USB 2.0 - side Ý Service -.
  • Included Accessories: Batteries, mounting screws| Cables Included: DVI cable - 6 ft| ENERGY STAR ....
Check Stock

SMKAN DP20V2A Constant Voltage Constant Current Programmable Control Step-down Supply Power Module

  • ...p by 0.01A. Boot voltages can be stored freely and the model has two groups of quick storage voltage. Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required. LCD display on the model has the function digital voltmeter and ammeter. You can view the preset voltage, input voltage, output voltage, the preset current, output current, output power and LCD brightness..
  • Adjusting preset voltage:Pressing SET button, page down to U-SET, press the codding potentiometer, then enter toadjustnumeric value. Press codding potentiometer in turn to choose the numeric value you want to adjust. Turn codding potentiometer to adjust the numeric value. If you want toexit adjusting voltage, press shortly SET. In the process of adjusting preset voltage, if you open output voltage mode by pressing the ON/OFF, the output voltage will be refreshing by increasing or decreasing the numeric value.
  • ifyou close output voltage mode by pressing the ON/OFF, the output voltage will not be refreshing by increasing or decreasing the numeric value..
  • Adjusting preset current:Pressing SET button, page down to I-SET, press the codding potentiometer, then enter toadjustnumeric value. Press codding potentiometer in turn to choos....
Check Stock

TAGVIT Digital Torque Wrench(7.38-147.5 ft-lbs./10-200 Nm), 1/2-Inch Drive Digital Torque Wrench Electronic Torque Wrench with Buzzer and LED Flash Notification for Bike Motorcycle Car Maintenance

  • ...two measurement modes, the TRACK mode can display the real-time torque value, and the PEAK mode can display the maximum torque value during use. The motorcycle torque wrench adopts a large LCD display, which is clear and easy to read. The highly backlit screen makes it easy to use even in dimly lit environments..
  • 10 Preset Modes: By adjusting the M0-M9 mode of the bicycle digital torque wrench , multiple sets of commonly used torque values and upper and lower limit alarm ranges of torque values can be preset (M0 Mode: preset torque value.
  • M1-M9 Mode: preset torque value Upper and lower limits). Ideal for beginners and professionals, it is widely used in bicycles, motorcycles, auto repair and industrial use, etc..
  • Quick Release Button: The quick release button on the head of the electronic torque wrench enables quick installation and removal of the socket, holding the socket firmly to prevent it from falling off. The extended handle design is ergonomic, comfortable to hold, non-slip, anti-rust, anti-corrosion, and more labor-saving during use. Made of high-quality materials can effectively extend the life of the wrench..
  • Led Light Flashing & Buzzer Alarm When approaching the set torque value, the digital torque wrench's LED light and buzzer will provide ....
Check Stock

Cadrim Electric Ball Pump, Smart Ball Inflator and Handheld Air Inflation with 2 Needle and 1 Nozzle for Sports Ball Soccer Basketball Football Volleyball Rugby

  • ...mping a with a regular hand pump, making the job of keeping large numbers of balls inflated MUCH easier before the game starts..
  • In maual mode, press Inflation Button to inflate, release it to stop pumping, LED screen shows the actual ball PSI..
  • about 2 hours for full charging and support to inflate about 30 balls..
  • Preset & Manual Mode: In preset mode, choose the correct ball type first, and press Inflatable Button to start pumping, it will stop to pump when gets to the preset PSI (Please Refers to the Recommended PSI).
Check Stock

Oneida Digital Probe Thermometer with TImer

  • Professional digital meat thermometer with timer mode and colored light system for party festival holiday to show your perfect culinary skill.
  • Bbq thermometer with preset temperatures for 9 types of meat and their various doneness levels recommended by USDA.
  • all of the preset temps can be reset to your desired tastes.
  • Smoker food thermometer with count-up and countdown timer ability up to 23 hours, 59 minutes to monitor both cooking temperature and time, so you never overcook your food.
  • Grilling oven thermometer with 40" Durable food grade stainless steel probe with STEP-DOWN tip design to get temperature more precisely and quickly.
  • Our intuitively designed probe thermometer allows for you to see both the meat cooking thermometer mode and countdown timer mode on the display without having to press a button to rotate between both modes.
Check Stock

LEKATO Multi Effects Guitar Pedal, with IR Loading 9 AMP Models, Delay Reverb Distortion Overdrive, Multi Effects Processor for Electric Guitar, Support Bluetooth 5.0,Recording, Built-in Battery

  • 【Supports Third Party IR Files】Cube Baby Guitar Multi Effects support 8 third-party IR files, so if you want to cover the original IR file, use the USB cable that comes with the product to import the third-party IR box simulation file. Please download the software "Cube-Suite" from LEKATO official website..
  • 【PRESET/EDIT/LIVE MODE】The multi effect pedal allows the player to edit the effects chain and then save the presets, after that you can also partially edit the previous preset effect and then save it agin. At Preset mode, which allows the player to switch between three presets.It comes with 3 preset modes (Lead, Rhythm, Clean) but you can easily replace them with your own presets created in Live Mode..
  • 【Built-in Battery】This Mini guitar effects pedal has a built-in battery and supports charging by a power bank or mobile phone adapter. It takes 2 Hours to fully charge one time, and can work 6-8 Hours. It supports Charging and Working at the same time.
  • 【3.5mm Headphone Output】The multi effects equiped with a 3.5mm Headphone Jack Output for more clear listening and monitoring, convenient for daily practice without disturbing family members and neighbors..
Check Stock