Reviews Diamond Turning Inserts

Pack of 5 Wood Turning carbide Cutter inserts Combination Set,For YUFUTOL Or Other Popular Wood Turning Tools(Include Square, Square With Radius,Diamond,Round Shape Cutters) Supplied with Screw

  • This Combination Carbide Inserts Set Will Give The Best Selection For Your Wood Turning Job,It Fits YUFUTOL Brand Wood Turning Tools Or Other Similiar Brand Tools..
  • Size And Shape Included: Square(14mm 15mm),Square With Radius (15mm-2″ Radius),Round(16mm), Diamond Shape With Radius Point..
  • 90* Square and 2″ Radius Fix Full Size Rougher, Round Cutter Fix Full Size Finisher or Hollower, Diamond Cutter Fix Detailer.
  • All The Carbide Insert Cutters Supplied With Screws, All You Need Is Find The Matched Wood Turning Tools Before Start Your Turning Job.
  • Advantages：Significantly Improved Efficiency And Turning Results, Save Time and Cost.
Check Stock

3PCS S08K/S10K/S12M- SDUCR07 95 Degree Internal Turning Boring Bar with 10pcs DCMT21.51 DCMT070204 Carbide Turning Inserts for Machining Steel Parts and Stainless Steel Three Holder Set With Inserts

  • ☞Material : DCMT2(1.5)1 carbide Inserts with CVD coating ,55 degree diamond turning inserts ，used for machining stainless steel and steel parts.
  • ☞About the Internal Boring bars: 40Cr common steel with forging process , strong and durable ,95 degree right hand internal turning holder. Screw compression,easy to install and remove.
  • ☞Advantage: Offer long life and faster cutting speed, low friction coefficient, good wear resistance Designed for Steel, cast iron and non-ferrous materials.
  • ☞Application: The Minimum processing aperture is 3-5mm of the boring bar head diameter. Used for turning and finishing on a wide range of materials..
  • ☞Package includes: 3pcs Turning Boring Bars (S08K-SDUCR07 + S10K-SDUCR07 +S12M-SDUCR07 ) + 10pcs DCMT070204 Gold Carbide inserts + 3PCS T8 Wrenches.
Check Stock

YUFUTOL Carbide Tipped Wood Turning tools Lathe set （Finisher/Rougher/Detailer/Hollower Swan Neck Hollower with Solid Wood Handle）and Diamond/Round/Square Carbide Inserts

  • ...and maximize cutting life. Each lathe chisel has a tungsten carbide tip with a rotatable, sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge.
  • 【Carbide Lathe Tools Package】You will get 11" tool handle*1, 9.8" connected handle extension*1, 9.8"round turning tool*1, 9.8"diamond turning tool*1, 9.8"square turning tool*1, 9.8"r-shape turning tool*1, interchangeable carbide inserts*8, T15 wrench*1, allen wrench*1,screw*2, aluminum protective case with high elasticity sponge*1. These turning tools for wood lathes are great gifts for those who love woodworking.
  • 【Widely Used】The wood turning tools and accessories are very simple turning learning, no need to learn and memorize complicated angles, suitable for all skill levels, lathe tools woodworking or DIY enthusiasts. Whether you are a beginner or an experienced turner, our carbide turning tools can bring you outstanding results.
Check Stock

KinRite 20 pcs Cutting Tools Indexable Inserts Turning Inserts DCMT32.51 DCMT32.52 Carbide Inserts for Metal Cutting Cutter bar 20pcs DCMT11

  • Pacake includs: 20pcs DCMT Inserts (5pcs brozun DCMT32.51 +5pcs yellow DCMT32.51 +5pcs brozun DCMT32.52 +5pcs yellow DCMT32.52).
  • 55° Diamond shaped single sided TIAIN coating carbide turning inserts , mainly used for steel, stainless steel finishing, semi-finishing and rough machining..
  • DCMT32.51--Relief Angle : 0.4, DCMT32.52--Relief Angle : 0.8, Cutting angle: 55°, Blade length:11mm, 5/32" Thickness ,1/64" Radius, With chipbreaker.
  • With continuous processing function, Used for turning and finishing on a wide range of materials.
  • Macthing for SDJCR11 /SDXCR11 tool holders /boring bars.
Check Stock

Wood Turning Tools Rougher Carbide Tipped Lathe Chisel Tool Bar 19.68 Inches With 14mm Straigt Edge Square Carbide Insert for Wood Hobbyist or DIY or Carpenter

  • ❶【8 Models Carbide Cutters Inserts Satisfy All Your Demands】: Include 12mm, 15mm and 8.9mm Round, 11mm, 14mm and 15mm Square, 30mm and 28mm Diamond with Sharp Point. Supplied with Screws..
  • ❷【Sphere Of Application】: Perfect for finish the curved, concave surfaces , hollower jobs and for general wood turning applications. This combination will give you a replacement carbide inserts for most woodturning tools..
  • ❸【Durable Tungsten Steel Material】: Made of solid tungsten steel - Provides the best combination of sharpness and durability. It is polished to a mirror finish for smoother cutting and longer tool life..
  • ❹【Suitable For All Levels Of Carpentry Workers】: This is a free combination suit that meets the needs of roughing and finishing cutting. Suitable for both professional carpenters and beginners..
  • ❺ All the carbide turning inserts cutting tools are supplied with screws..
Check Stock

Turning Insert Holder SVVCN 1212H 11, with 1PCS Insert VBMT 221 (VBMT110304), Square Shank, Steel, External, Screw Clamp, Neutral, 12mm Width x 12mm Height Shank, 100mm Length.

  • ★Packing : 1pcs MTJNR5/8" , 1pcs MWLNR5/8" ,1pcs MCLNR5/8" ,1pcs SER5/8" turning holder , 4pcs carbide turning inserts and 3pcs wrenches..
  • ★ASZLBYM lathe tool holder set : Shank size: 5/8" inch x 5/8" inch.
  • Overall Length: 4"inch, cutting direction:right cutting..
  • ★Turning holders : turning holder are made of high quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning holder , for long time use..
  • ★Turning inserts : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ★The holders are packed in a premuim aluminium carrying case,easy to carry..
Check Stock

Carbide Tipped Wood Turning Tools Set Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts

  • OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert..
  • MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability..
  • INDEXABLE CUTTER DESIGN – Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the "Aogbra Store" to order replace carbide cutter inserts when you need ).
  • EASY TO USE – The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools..
  • TOOL DETAILS – Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest..
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

OSCARBIDE 5/16

  • Mini Turning Tool holders with 1/16'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • 5pcs in a wooden case for safe storage, the carbide inserts replacement TCMT090204,please search the Asin B07SJX9YNR to buy it on amazon..
Check Stock

Carbide Wood Lathe Tools, Woodturning Tools Wood Lathe Turning Tool Set, with Round/Square/Diamond Insert and Interchangeable Aluminum Alloy Grip Handle

  • Combo Set Include: 4 Pieces Wood Turning Tools(Finisher/Rougher/Detailer/Swan Neck Hollower),2 Sets of Carbide Insert Cutters And 2* Key Wrenches.
  • 2 Sets of indexable Replacement carbide inserts:matched with Carbide Cutter (2pcs Square14×14 × 2.0mm，2pcs Round 12 × 2.5mm-30°，2pcs Round 16 × 3mm-30°,2pcs Diamond 10×28mm with Radius Point).
  • Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY.
  • Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer/Hollower will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening，for wood hobbyist or DIY or carpenter.
Check Stock