Reviews Diamond Segment

SHDIATOOL 4-1/2 Inch Porcelain Diamond Mesh Turbo Saw Blade Cutting Granite Marble Ceramic Tile Brick Pack of 2

  • 2pcs 4.5" Hot pressed sintered Mesh Turbo Diamond Saw blade with rim segment for cutting.
  • Diameter 4.5"/115MM, Bore 22.23MM with 22.23-20mm washer, Diamond height 10MM, Segment thickness 1.6MM..
  • Remark: Please remove the 22.23-20mm washer,if you fit the 7/8” arbor..
  • Dry or wet cutting for Hard material, granite marble tile ceramic brick.
  • New Design of Mesh turbo rim segment, the mesh turbo help to cooling and bring the dust out, so more efficient, fast and stable in cutting.
Check Stock

SHDIATOOL Tile Diamond Saw Blades Porcelain Cutter Disc for Dry/Wet Cutting Grinding Ceramic Marble Artificial Stone Diameter 4.5 Inches x 7/8 inch

  • Dimensions: 115x1.9x22.23mm (Diameter x Thickness x Hole),Diamond Segment Height-Front 20mm,Diamond Segment Height-Back 10mm.
  • Special Design:the double-sided cutter head,Front/back diamond segment height- 20/10mm,can allow for trim/grind on front face and make straight cuts and grind bullnose edge.
  • X Mesh turbo rim segments are Sharp and Wear-resistant,can help to cool and bring the dust out and get more efficient and better performance.
  • Hot pressed Technology with high-quality diamonds of this Tile Marble blade provides longer working life and more accurate straight line cuts.
  • Dry/Wet Cut and Grind Ceramic,Tile,Marble,Artificial Stone, Ultra-clean, spark-free and chip-free cuts.
Check Stock

SHDIATOOL Tile Diamond Saw Blade, Cutting Grinding Disc Wheel 125mm/5inch for Dry/Wet Cutting & Grinding Porcelain Ceramic Tile Granite Marble Artificial Stone …

  • Dimensions: 125x1.9x22.23mm (Diameter x Thickness x Hole),Diamond Segment Height-Front 20mm,Diamond Segment Height-Back 10mm.
  • Special Design:the double-sided cutter head,Front/back diamond segment height- 20/10mm,can allow for trim/grind on front face and make straight cuts and grind bullnose edge.
  • X Mesh turbo rim segments are Sharp and Wear-resistant,can help to cool and bring the dust out and get more efficient and better performance.
  • Hot pressed Technology with high-quality diamonds of this Tile Marble blade provides longer working life and more accurate straight line cuts.
  • Dry/Wet Cut and Grind Ceramic,Tile,Marble,Artificial Stone, Ultra-clean, spark-free and chip-free cuts.
Check Stock

Radiac 34078809 8"x 1/2"x 1-1/4" RA46-G800-VOS Ruby Surface Grinding Wheel

  • Double Row Segmented Diamond Cup Wheel are designed for grinding concrete and fieldstone, it's an ideal concrete grinding wheel 4 1/2 for angle grinder..
  • The double row diamond cup grinding wheel is suitable for grinding machines and angle grinders to remove thinset and excess materials on your surface quickly..
  • The double segment of this diamond grinder cup configuration allows faster material removal ideal for all types of stone like concrete, ceramic, tile, marble, granite, rock, cement, etc..
  • Using the diamond grinding wheel 4 1/2 inch for surface finishing on concrete, screed, and natural stone like granite, can also be used for the removal of glues and epoxies or thinnest.
  • Durable high-quality brazed Double row segments diamond grinding cup wheel for fast and smooth grinding with 5mm segment height use on both wet or dry surfaces..
Check Stock

8 Oz Attack Epoxy Adhesive Removal Solvent for Metals Stones Glass Wood Glue Removing Residue Dissolving Jewelry Cleaning Solution

  • RCD Technology - Reinforced Compound Diamond Technology, a new concept and invented technology of diamond segment production. RCD segment shows excellent diamond keeping ability with high durability against impact and abrasion. Check product description for more information..
  • REMOVING - Ideal grinding cup for removing Urethane, Epoxy, Glue on concrete floor. DOUBLE diamond layer for effective removing work..
  • COMPETITIVE & ECONOMICAL - This is economical and price competitive than typical PCD grinding cups in the market..
  • RUBBER CUSHIONED CORE - The rubber cushioned sandwich core enables user-friendly use. This absorbs noise and vibration. Sandwich type : Steel + Rubber + Steel..
  • MINIMUM DAMAGE - Spike Grinding wheels minimize the damage caused to the floor, for clean and effective work..
Check Stock

Delta Diamond Kick-Asphalt 8 Inch Diamond Blade, Segmented, Wet/Dry Cutting Asphalt, Green Concete, Masonry Block, and Similar Materials (8\)

  • PREMIUM DIAMOND BLADE - Kick-Asphalt uses premium diamond segments and is designed to cut asphalt, green concrete (poured within 72 hours), masonry block, and similar abrasive materials..
  • 10MM SEGMENTS - 10MM tall diamond segments maximize cutting life and provide a low cost per cut..
  • DEEP U GULLETS - This unique segment/keyslot design allows for better air cooling and chip deflection resulting in better performance..
  • SPECIFICATIONS - 8" diameter X .090 thick with a diamond-7/8" arbor. Also included is a 5/8" bushing. Fits most hand-held angle grinders and circular saws. Heat-treated high-speed steel core is guaranteed to withstand the demands of dry cutting. Expected blade life is approximately 4,000 inch feet (one inch foot = 12" length X 1" depth). The recommended operating speed is 4,500 rpm..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charg....
Check Stock

4-1/2\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\-5/8\ Arbor

  • MULTIPURPOSE - 4.5" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

7\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\ Bushing w/Diamond Arbor

  • MULTIPURPOSE - 7" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

(3 Pack, 4 1/2 inches) GRAFF Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Dry and Wet Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete, Ceramic & Kerb

  • ✔︎ CONTINUOUS RIM BLADE has a high content of soldered diamond segment that makes its ideal for cutting ceramic & ceramic tile..
  • ✔︎ TURBO BLADE - diamond blade for cutting most materials including concrete, tile, stone, ceramic, paving flag, marble, granite, brick, masonry & curb..
  • ✔︎ SEGMENTED BLADE – diamond blade has teeth with diamond segments that allow cutting stone, marble, granite, brick, masonry & paving flag..
  • ✔︎ Our blades are suitable for DRY & WET CUTTING and can SELF-SHARPEN by erasing diamond grits during operation(2 or 3 cuts on silicon/abrasive stone)..
  • ✔︎ SPECIFICATIONS: Diameter: 4 ½ Inch (115 mm), Arbor: 7/8 Inch with 5/8 Inch adapter, Cutting width: 2 mm/2.5 mm/2mm, Segment height: 10 mm/10mm/7mm..
Check Stock

BRSCHNITT Diamond Blade Set,5 Inch Arbor 7/8\ - 5/8\ for Granite,Stone,Masonry,Terrazzo,Paver,Concrete,Pack of 2 Dry/Wet Circular Saw Cutter Angle Grinder Diamond Cutting Disc 125mm

  • ✔Size --Total 2pcs,5"(125mm),segment height 7mm ,turbo rim segment thickness 2.4mm ,segmented rim segment thickness 2mm,Arbor 22.23mm(7/8-Inch) ,includes a 20mm(4/5") and 16mm(5/8") arbor adapter Bushing in the package.
  • ✔Our diamond cutting wheel are designed to provide fast, smooth and extremely clean cutting in a variety of materials, including masonry brick, granite, marble,concrete,stone,slate and stucco.
  • ✔Turbo rim diamond cutting saw blade and general purpose power saw segmented diamond blade for smooth & fast cutting of Granite,Stone,Masonry,Terrazzo, Paver,Concrete.
  • ✔Our blades are suitable for Dry or Wet Cutting,More efficient by Dry Cutting and Wet Cutting for long life time.
  • ✔Machine --For use on Tile saws, circular saws, and angle grinders.It is suitable for 7 / 8 "inner hole machine, also suitable for 4/5" or 5 / 8 "inner hole machine through arbor adapter Bushing.
Check Stock