Reviews Diamond Metal Abrasives

EZARC Diamond Cutting Wheel 4-1/2 x 7/8 Inch for Metal, Cut Off Wheel with 5000+ Cuts on Rebar, Steel, Iron and INOX

  • [Diamond technology] 1 equals 100, EZARC diamond cutting disc delivers 5,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels..
  • [All in 1 Metal Solution] Ideal for dry cutting of metal, rebar, iron, brass profiles, aluminum, different types of pipes and sheet metal with over 100X longer life than bonded cutoff wheels in metal cutting applications..
  • [Avoid Injury] Solid steel wheel body greatly reduces risk of shatter and injury for added safety, diamond cutting edge is 100% contaminant-free, it does not wear down like bonded abrasives, reducing dust particles for a cleaner work station..
  • [Industrial Quality] Quality Assured accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear..
  • [Accurate Cutting] Maintains original wheel diameter throughout the life of the blade for better control and precision cutting..
Check Stock

Diamond Machining Technology (DMT) 4\ Diamond Whetstone Bench Stone, Extra-Extra Fine Grit Sharpener (W4EE)

  • Crafted from the highest quality materials.
  • Leather sheath provides each access and portability.
  • Extra Fine diamond for the finest polished edge of al bonded diamond abrasives.
  • Sharpens knives faster than conventional stones with DMT's monocrystalline diamond surface.
  • No oil is needed-sharpen dry or with water.
  • Durable construction will provide years of consistent performance and reliable service.
Check Stock

Chef'sChoice 4643 Manual Knife Sharpeners 15 and 20-Degree for Serrated and Straight Knives Diamond Abrasives, 2-Stage, Gray

  • CHEF'SCHOICE - Professional 2-stage sharpener for super sharp edges on your 15 and 20-degree class knives.
  • DIAMONDS - 100 percent diamond abrasives are used in all three stages. The initial stages sharpen and hone using 100 percent diamond abrasives while the third stage polishes the edge with micron sized diamond abrasives.
  • KNIVES - Sharpen straight edge and serrated knives as well as sports and pockets knives.
  • RAZOR SHARP - Chef’sChoice advanced CrissCross sharpening technology delivers an extremely sharp edge by using diamond abrasive wheels which sharpen simultaneously for a superior burr-free edge that cuts effortlessly.
  • EASY TO USE - Precise bevel angle control creates ultra-sharp 15 and 20-degree edges.
  • DURABILITY - Separate sharpening and honing/polishing stages for a razor sharp, arch-shaped edge that is stronger and more durable.
  • FEATURES - a Soft Touch comfortable handle for an easy and secure grip.
  • When buying, please check whether the product is "Ships from and sold by " just below the product price to make sure you are receiving this product from the manufacturer of Chef'sChoice to ensure your product guarantee is honored..
Check Stock

Herm Sprenger Diamond Paste Bit Polish

  • ...000 Grit 0 to 1 Microns, 50,000 Grit 0 to 0,5 Microns and 100,000 Grit 0 to 0,25 Microns for Final Polish..
  • MADE IN USA: Forget other cheap polishing compounds! TechDiamondTools ultra precise, high strength polishing compounds ensure sustainable quality in any kind of application. Keep away from artificially colored abrasives. TechDiamondTools high-tech diamond compound has no color additives. It facilitates faster cutting and is safe for materials with high permeability..
  • USE OUR PRODUCTS AS: polishing compound, stropping compound, epoxy polishing paste, rock polishing compound, lapidary diamond paste, buffing compound, resin polishing, abrasive paste, metal polishing compound, granite compound. Use it both for manual and machine polishing. Best used with the wool buffs or leather strops..
  • SUITABLE FOR ANY SCENARIO: scratch genie, knife polishing compound, micron paste, mirror repair, glass watch scratch remover, watch polishing, crystal polishing, gun polishing, flattening, sharpening, knife sharpening, stock removal..
  • IDEAL FOR ALMOST ANY MATERIAL: glass, metal, ceramics, gemstone, marble, wood, steel, aluminum, granite, stainless, simichrome, rock, plastic, jewelers, brass, cerium, polyurethane, acrylic, rottenstone..
Check Stock

Upgrade Kit for Work Sharp Guided Sharpening System WSSA0003300

  • Upgrade kit intended for use with the Work Sharp Guided Sharpening System (WSGSS sold separately).
  • Expand your Work Sharp Guided Sharpening System to repair damaged blades, sharpen a wider range of tools, or create the ultimate cutting edge!.
  • The Guided Sharpening System Upgrade Kit includes two additional Diamond Plates. Extra Coarse 220 grit diamond, and Extra Fine 800 grit diamond, and a Leather Stropping plate with honing compound..
  • The Diamond Plates and Leather Strop are 6" x 1.25" and are designed to fit the Guided Sharpening System.
  • 3 Year Warranty covers defects due to workmanship and design, excluding abrasives. Warranty covers consumer use only, not industrial or commercial use..
Check Stock

THE NEW FOOLPROOF FISH COOKBOOK FOR BEGINNERS : The Complete Guide With The Best Smoker Recipes Secrets For Smart Peoples for Everyone.

  • 3-Stage Kitchen Knife Sharpener: Stages 1 and 2 of the EdgeSelect knife sharpening system use 100% diamond abrasives to sharpen and hone edges.
  • Stage 3 uses patented stropping disks to polish and finish the blade.
  • Diamond Abrasives: This versatile straight-edge and serrated knife sharpener uses proprietary diamond abrasives, the hardest natural substance on earth, to quickly and easily sharpen edges.
  • 15-Degree Edges: This electric sharpener applies an ultra-sharp edge to 15-degree knives and easily converts 20-degree knives to a finer 15-degree edge for easier cutting.
  • Full Length Edge: Flexible spring guides hold the blade at the ideal angle during use, resulting in longer-lasting, arch-shaped edges down the full length of the blade.
  • Easy To Use: Knife sharpener comes equipped with a simple on/off switch.
  • First time sharpening requires approximately 1 minute.
  • Resharpening takes approximately 10 seconds.
Check Stock

OKDIAMOND Diamond Cutting Wheel 6 x 7/8 Inch for Metal, Cut Off Wheel with 3000+ Cuts on Rebar, Steel, Iron and INOX, for Angle Grinder-6 inch

  • ...ng blade according to the test results, OKDIAMOND enables to make more than 3000 cuts. Increased lifetime of this cut off wheel is ensured by high-temperature plasma soldering and a new generation of diamond grit in the segment. And our cut wheels have no wear and tear after work , it does not wear down like bonded abrasives.
  • Environmental - When you use our cutting wheel : less sparks, no dust, no smell, no overheating. reducing dust particles for a cleaner work station. It's very comfortable in usage than traditional wheels. It's 100% contaminant-free. The diamond cutting wheel can be used for grinding burred edges that can leave after rough metal cutting..
  • SAFETY- Wheel breakage eliminated when operating at high rotation speed (13200 RPM) because of special construction of the disc body made of high-strength steel. It can greatly protects staff..
  • CERTIFICATED - Our wood cutting wheel was certified by MPA Hanover in Germany. If you need we also can offer to you offer report and test video..
Check Stock

Chef’sChoice 290 Knife Sharpeners AngleSelect Hybrid 15 and 20-Degree Diamond Hone 3-Stage Black

  • ALL STYLES OF KNIVES: Hybrid AngleSelect technology for razor sharp edges on all your knives, including European/American 20-degree knives, Asian....
  • HYBRID SHARPENER: Combining electric and manual sharpening stages for an extremely sharp, arch-shaped edge that is stronger and more durable.
  • ADVANCED SHARPENING: Efficient CrissCross sharpening technology and diamond abrasive wheels sharpen simultaneously to create a highly effective,....
  • DIAMONDS: 100 percent diamond abrasives in Stages 1, 2 and 3 and ultra-fine diamond abrasives in Stage 3 ensure a super sharp, polished edge.
  • PRECISION: Angle guides for precise sharpening.
Check Stock

Chef’sChoice Sportsman Diamond Hone Electric Knife Sharpener for Both Straight Edge and Serrated Knives, 2-Stage, Green

  • For sharpening all types of knives, including hunting, fishing, pocket, kitchen and household knives.
  • Sharpens both straight edge and serrated knives to better than factory sharpness.
  • 2-Stage sharpening for stronger and more durable Edges and faster results.
  • Stage 1 - sharpens using 100% Find diamond abrasives.
  • Stage 2 - hones the edge Using ultra Fine 100% diamond abrasives.
Check Stock

Benchmark Abrasives 14\ Turbo Combo Diamond Blade with Steel Core, Saw Blades for Angle Grinder, Cutting Porcelain Ceramic Tile Granite Concrete Marble

  • Benchmark Abrasives diamond saw blades are ideal for cutting concrete, roofing tile, stone ceramic, granite, marble, and other hard materials, etc..
  • The turbo combo diamond blade is designed with a steel core and suspended diamond metal matrix technology. It helps to perform cutting fast and smoothly..
  • High-performance blades support all models of saws. It is used with high-speed saws. Durable blades are ideal to use for dry or wet cutting applications..
  • Efficient diamond blades are used in automotive, transportation, by professional contractors and DIY users, foundries, construction, welding, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock