Reviews Diamond Blade Segments

GRAFF Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Diamond Saw Blades Segment Height 0.394” (10 mm) - 5 inches

  • UNIVERSAL - 5" Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF segmented diamond cutting wheel is intended for working with Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete & Curb. Our 5" angle grinder concrete blade can be used both for dry and wet cutting..
  • INCREASED OPERATING TIME - Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE - Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY - Diamond blade for granite and stone is designed for precise cutting of concrete using small-sized angle grinders with 7/8” Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS - GRAFF concrete diamond blade 5 has teeth with soldered diamond segments all around. Diameter: 5 Inch (125 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) Adapter, Cutting width: 0.079 Inch (2 mm), Segment height: 0.394 Inch (10 mm), Segments number: 9. Diamond concrete saw blade has a tough body with 0.047 Inch (1.2 mm) thickness..
Check Stock

Delta Diamond Kick-Asphalt 8 Inch Diamond Blade, Segmented, Wet/Dry Cutting Asphalt, Green Concete, Masonry Block, and Similar Materials (8\)

  • PREMIUM DIAMOND BLADE - Kick-Asphalt uses premium diamond segments and is designed to cut asphalt, green concrete (poured within 72 hours), masonry block, and similar abrasive materials..
  • 10MM SEGMENTS - 10MM tall diamond segments maximize cutting life and provide a low cost per cut..
  • DEEP U GULLETS - This unique segment/keyslot design allows for better air cooling and chip deflection resulting in better performance..
  • SPECIFICATIONS - 8" diameter X .090 thick with a diamond-7/8" arbor. Also included is a 5/8" bushing. Fits most hand-held angle grinders and circular saws. Heat-treated high-speed steel core is guaranteed to withstand the demands of dry cutting. Expected blade life is approximately 4,000 inch feet (one inch foot = 12" length X 1" depth). The recommended operating speed is 4,500 rpm..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charg....
Check Stock

EZARC 4.5 inch Diamond Blade, Turbo Diamond Saw Blades for Angle Grinder, 4.5" Stone Blade for Fast Cutting Porcelain Ceramic Granite Marble Brick(2-Pack)

  • 【Stone Cutting Master】EZARC Diamond Blade offers excellent performance and efficiency when it comes to cutting through masonry materials such as ceramic, granite, marble, concrete and brick..
  • 【Turbo Segments】The turbo design reduces debris and provides a smoother, cleaner cut, resulting in a more professional surface finish. By minimizing vibrations during the cutting process, it enhances user comfort and control, making the overall experience more enjoyable and precise..
  • 【Diamond Grit】The strategic positioning of turbo segments in our diamond blade ensures optimal cooling, preventing overheating and extending its lifespan. With premium HRC90+ diamond grit and a special dimensional arrangement, this versatile diamond masonry blade offers maximum cutting life for heavy-duty demands..
  • 【Compatibility】EZARC 4-1/2 inch diamond cutting wheel is suitable for most tile saws, hand-held angle grinders and wet saws with a 7/8" Arbor (includes a adaptor for 5/8" arbor). Disc Size: 4.5 Inch.
Check Stock

Delta Diamond Cougar S 14 Inch Premium Diamond Saw Blade, .125 X 1\-20mm Arbor, Dry or Wet Cutting Reinforced Concrete w/ Rebar, Masonry, Stone, Laser-Welded Segmented (14\)

  • ...e (up to 9,000 psi) wtih rebar, asphalt, green concrete, masonry, hard stone (such as quartzite) and all similar materials..
  • USE WET OR DRY - Use Cougar S 14" diamond blades wet or dry. The center core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting..
  • PREMIUM TURBO SEGMENTS - Alternating notched turbo diamond segments cut through material with greater efficiency than all flat, smooth segments. The result is a concrete cutting blade that cuts fast and straight with minimal stress on the operator and machine..
  • SPECIFICATIONS - 14" diameter X .125 (1/8") thick and has a 1" arbor hole, 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws or walk-behind saws up to 35 HP. Expected blade life is 8,000 inch feet (inch foot=12" long cut X 1" depth)..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool ....
Check Stock

Delta Diamond Cougar S 16 Inch Premium Diamond Saw Blade, .125 X 1\-20mm Arbor, Dry or Wet Cutting Reinforced Concrete w/ Rebar, Masonry, Stone, Laser-Welded Segmented (16\)

  • ...e (up to 9,000 psi) wtih rebar, asphalt, green concrete, masonry, hard stone (such as quartzite) and all similar materials..
  • USE WET OR DRY - Use Cougar S 16" diamond blades wet or dry. The center core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting..
  • PREMIUM TURBO SEGMENTS - Alternating notched turbo diamond segments cut through material with greater efficiency than all flat, smooth segments. The result is a concrete cutting blade that cuts fast and straight with minimal stress on the operator and machine..
  • SPECIFICATIONS - 16" diameter X .125 (1/8") thick and has a 1" arbor hole, 3/8" drive pin hole and 20mm bushing. Max 4,750 rpm. For use with hand-held power saws or walk-behind saws up to 35 HP. Expected blade life is 9,000 inch feet (inch foot=12" long cut X 1" depth)..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool ....
Check Stock

Virginia Abrasives 425-07388 UV Multi-Purpose High Speed Diamond Blade (14\) Asphalt/Concrete Cutter - Wet or Dry - High Speed Cutoff - Performance Cutting Blades (14\ x .125\ x 1\/20mm DP - 10mm Segments)

  • ... Virginia Abrasives laser welded diamond blades are ideal for concrete cutting, or dry cutting, due to their high welding strength. Our laser welded diamond Blade will have a longer life span and stronger cut than brazed diamond blades as the bond between the segment and core is significantly stronger..
  • LASER WELDED SEGMENTS: Rather than sintered blades that have a shorter life and do not cut as efficiently, the Virginia Abrasives diamond saw blades are laser welded to extend the life of every saw diamond blade as well having the ability to cut faster..
  • HIGH-LEVEL PRECISION: As well as reducing the strain on the concrete structure, the high-performance nature of our diamond concrete saw blades make sure it gives it a smooth cut. For more comfort and high-speed cutting, choose our saws blades for your next project..
  • DURABLE: Virginia Abrasives diamond saw blades are highly durable compared to other types of concrete cutting blades out there. Our diamond blade is made using a circular steel cutting disc with huge 12-mm segments on the outer edge that will maintain precision and performance for a long time.
  • OUR STORY: Virginia Abrasives' roots date back to the early 1970s when a hard rock garnet mining business in the Adirondack mountains of New York. ....
Check Stock

(10 PACK) SUPREMAX Heavy-Duty 14 inch Supreme Quality Dry/Wet Cutting Diamond Blades for Concrete Asphalt Masonry Stone (14" - 10 pcs)

  • 10-PACK of supreme quality diamond saw blades with versatile slant segments, it is an excellent combo blade for variety cutting. The undercut segments can help to fit with the abrasive undercutting conditions..
  • Perfect all Cut Hard Concrete, Rebar, Brick, Block, Stone Paver, Granite, Marble, Tile, Roof Tile Asphalt, Green Concrete, Limestone, Ductile Iron Pipe..
  • The core is made from heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting. The 12mm tall diamond segments provide maximum cutting life with the lowest cost per cut. Expected blade life is 6,000 inch feet (inch foot=12" long cut X 1" depth)..
  • The 3/8" core holes are used as depth indication for operator convenience as well as cooling and dust/slurry removal. Laser welded. Can be used wet or dry..
  • Arbor 1"-20mm. Size 14"x.125"x..472"/12mm..
Check Stock

DEWALT DW4714 Industrial 7-Inch Dry Cutting Segmented Diamond Saw Blade woth 5/8-Inch or 7/8-Inch Arbor, Yellow

  • Extended performance diamond matrix provides 350x's the life of conventional abrasives and enhanced material cutting.
  • Segmented rim blades are laser welded with heat treated steel bodies which provides increases durability and long life.
  • Large diamond segments with cobalt is ideal for use across varios product applications.
Check Stock

SHDIATOOL 10 Inch Wet Tile Saw Blades Cutting Ceramic Porcelain Marble Pack of 2

  • Hot-pressed diamond cutting blades with Hook Slot.
  • Arbor: 25.4mm with a 16mm reducer washer.
  • Laser cut hook slot on core steel, lower the noise, increase the sharpness of the blade.
  • Wet cutting, short time dry cutting is available and is better than regular one.
  • High quality #50/70 diamond grain and continue design segments provide low chip cutting performance.
Check Stock

14\ General Purpose Diamond Saw Blades for Concrete and Brick, 1\ Arbor

  • MULTIPURPOSE - 14" blade designed to cut hard/reinforced concrete, hard paver brick, refractory brick.
  • PREMIUM DURABILITY - Complete steel blade body – precise accuracy and warp resistance for perfect cuts.
  • LASER WELDED SEGMENTS - 15mm diamond encrusted segments add cutting stability and increased tool life with performance/price ratio in mind.
  • PRECISION - Cutting depth of 4-5/8 inches (14") with 1" arbor.
  • RECOMMENDED RPM - 2500 RPM (optimum), 4300 RPM (max).
  • USE WET OR DRY - high speed handheld saws or lightweight walk-behind saws recommended.
Check Stock