Reviews Dewalt Drill For Ice Auger

8 Inches Ice Fishing Auger with Extension - Ice Auger Drill Suitable for Gas Powered Earth Auger and Power Drill with Safety Disk, Replaceable Auger Blade

  • 【Ice Auger Adapter and Extension】Hex head shaft Ice Auger Adapter fit in 1/2 inch drill chuck for Power Drill and adjustable in three different heights, about 14 inches in length. 0.79 inch inner Round Shaft black extension fit to Gas Powered Earth Auger , 12.6 inches in length. The Extension and adapter convert most hand ice augers to automatic mode, saving your fishing time..
  • 【High-Performance Drilling】8'' auger diameter, about 20'' drilling depth(without Extension length ), weight 5.4 lbs. Quietly, lite weight and easy to use. Comes with spare blades, Dual flat steel blades offer smooth cutting and breakthrough. Drills fast and with the center point it can overlap holes and helps keep the bit stable when starting..
  • 【High Quality】The Ice Auger, Auger extension and Ice fishing Auger Drill Adapter were all forged from heavy duty, welded steel and finished with a powder coat for Long-lasting use without rusting or damaging..
  • 【Safety Topper and Carry Bag】The safety topper is really a must to prevent the auger from going through the ice if it falls out of your drill chuck. Saved your auger from disappearing dow....
Check Stock

Ice Auger Drill Adapter with Handle - 18mm/0.720 Output Shaft Diameter - Steel Cordless Drill Attachment for Ice Auger Drill Conversion

  • AUGER DRILL ADAPTER: Convert hand auger into a power auger with this ice auger adapter for cordless drill.
  • Must-have ice fishing accessories to break....
  • CONNECTIVITY: Ideal cordless drill ice auger attachment to perfectly fit majority augers including Eskimo, Expert Pro, Arctic, Spiralen, Easy Ice,....
  • POWER DRILL COMPATIBLE: Recommended to use with cordless power drills of 18V–3Ah 40/80 Nm.
  • DURABLE STEEL CONSTRUCTION: Zinc plated high-quality carbon steel construction for robustness and corrosion resistance.
  • SAFE AND EASY TO HANDLE: Non-rotated rubber-coated handle adds safety, control, and protection.
  • 0.23" and 0.31" holes allow for universal utilization....
Check Stock

PROYAMA Ice Auger, Ice Fishing Auger, Auger for Ice Fishing with Driller Adapter and Extra Blade, Folding Handle (6 Inch)

  • 2 in 1 Drill: you can easily convert your auger from a Handy auger to a Electric auger by adding a power head(provide by yourself).
  • The ice auger bit is equipped with an adapter and a top plate. The adapter allows you to connect the auger with various kinds of the drill. The top plate can prevent you from the hurt of splashing ice..
  • High-Performance Drilling: The ice drill auger’s effective length is: 41 inches, rotating diameter: 6 inches, weight: 6.6 lbs. It is the ideal choice for ice fishing, science exploration, etc..
  • Adjustable Handle and Comfortable Grip: Three adjustable height settings safety cover, adjusts from 48" - 64", suitable for various ice scenes. The ergonomically designed handle system uses foam materials to protect your hands.
  • Dual-Flat Blades : Stainless Steel Blades are designed to stay sharp longer, and Blade Protector Protect the blade from damage and extend the life of the product.
  • One Year Warranty: Welcome to contact us by email for any questions, we'll reply within 24 hours.
Check Stock

K-Drill Idrl24 Orange Safety Cap(Blade Cover)

  • PERFECT SOLUTION –It is essential that you protect your Ice Fishing Auger from falling under the ice when using a battery powered drill. Simply add an AUGER STOPPER with adapter to the top of the auger shaft to solve this very problem. **For HAND augers only. Does NOT fit K-Drill Augers**.
  • QUALITY - This item is a newly manufactured product on the market to make sure you have a stress-free fishing experience. Very durable, made of a heavy-duty solid red plastic disc with a stainless-steel adapter. *Patent No. US D907,071 S.
  • Diameter: 0.71"/1.80 cm, Wing Bolt Hole: 0.25”/6.64cm, Chuck: fits up to ½” drill bit. Auger Stopper Disc.
  • Diameter: 9”/22.86cm, fits up to 8” auger blades. Washer.
  • Diameter 5/8”. E-clip. *For Hand augers only. Does NOT fit K-Drill Augers*.
  • ASSEMBLY REQUIRED –The Auger Stopper includes 4 parts.
  • (1) stainless-steel adapter (1) steel washer (1) e-clip (1) stopper disc. Assembly instructions are included with packaging, making it easy to install within a few minutes. PLIERS WILL BE NEEDED for assembly..
Check Stock

VEVOR Ice Drill Auger, 8'' Diameter Nylon Ice Auger, 41'' Length Ice Auger Bit, Auger Drill w/ 14'' Adjustable Extension Rod, Rubber Handle, Drill Adapter, Replaceable Auger Blade for Ice Fishing Red

  • High-Performance Drilling: The ice drill auger’s effective length is: 41 inches (without the extension rod), rotating diameter: 8 inches, weight: 11.13 lbs/5.05 kg. It is the ideal choice for ice fishing, science exploration, etc..
  • Nylon Material: The auger bit adopts nylon material, the main shaft, aluminum, which is lightweight, durable, and rust-proof. Meanwhile, it has good tensile, impact resistance, and flexibility, saving your labor and time..
  • Sharp & Sturdy Blades: The blades are made of premium steel, sharp and sturdy, cut through ice like a knife through the butter. In addition, extra two blades are included for replacement. Finally, the blades come with a blade guard, which can prevent the blades from damage..
  • Extension Rod & Adapter: If you want to extend the length of the ice auger, you can detach the adapter and top plate from the shaft, then attach the extension rod to shaft.
  • finally, fix it with a special bolt. Adjustable length: 41"$.5" 8".
  • 104 cm/113 cm/122 cm. The ice auger bit is equipped with an adapter and a top plate. The adapter allows you to connect the auger with various kinds of the drill. The top plate can prevent you from the hurt of splashing ice..
  • Professional Accessories: Unlike other ice augers, our ice drill featu....
Check Stock

SORANGEUN 31.5”x6” Ice Auger,Heavy-Duty Ice Augers for Ice Fishing,Auger Drill Bit for Ice Post Hole Digger,Bule Ice Fishing Auger

  • 【Sturdy Material】Our ice auger is made of heavy iron, which can effectively prevent the ice auger from breaking during drilling. The blade at the bottom is made of stainless steel, which will not rust even after multiple uses..
  • 【Sharp Blades】There are 2 rotary blades and 1 central blade at the bottom of the ice drill, which are made of high-quality stainless steel to prevent rust while maintaining the characteristics of light weight and sharpness. At the same time, the three blades can be replaced at will. You can easily make many water ice holes..
  • 【Suitable Size】Our ice fishing auger is carefully designed by the designer, with a length of 31.5 "and a width of 6".Too short size will damage your waist and back when punching, while too long size will be inconvenient to carry..
  • 【Easy to Install】This ice auger is very simple in terms of blade installation and connection with the drill. The blade can be directly disassembled and installed with a screwdriver.
  • When connecting with the drill, pay attention to the hole size of the ice drill. The hole diameter of this ice drill is 0.75 inch..
Check Stock

Mormysh Ice Auger Drill Adapter with Galvanized Steel Plates, Ice Fishing Planetary Reducer for Ice Screws, Ice Fishing Drill Attachment with Rubber Handle, Cordless Adapter for Ice Auger Drill Conversion

  • AUGER DRILL ADAPTER: The Planetary gear ice drill attachment is made to provide you with a simpler and easier way to drill ice using your screwdriver while saving battery power when drilling holes making it the perfect addition to your ice drilling kit.
  • REDUCE PRESSURE & SAVE TIME: The heavy-duty ice fish gear is designed with a gearbox that helps reduce pressure on the chuck and the screwdriver mechanism while helping minimize battery use allowing you to drill more holes on a single battery.
  • DURABLE & STURDY BUILD: Our ice auger drill extension adapter is made using only durable and strong materials including carbon steel and Polyacetal that can keep up with your daily ice fishing needs. It’s resistant to rusting and corrosion to provide long term use.
  • EASY TO INSTALL & USE: You can easily install this gearbox on your ice augers for ice fishing without any hassles. It’s designed with an ergonomic rubber handle that provides a secure and comfortable grip for a more convenient and efficient drilling experience..
  • WIDE COMPATIBILITY: The auger drill bit adapter is designed to fit most drill chucks of 0.5″ or larger. Recommended for use with cordless power drills/screwdrivers of 14V–3Ah 30/40 Nm. Compatible with Eskimo, Expert Pro, Arctic, Spiralen, ....
Check Stock

VEVOR Ice Drill Auger, 8" Diameter Nylon Ice Auger, 39" Length Ice Auger Bit,Auger Drill with 11.8" Extension Rod,Auger Bit w/Drill Adapter,Top Plate & Blade Guard for Ice Fishing Ice Burrowing Red

  • High-Performance Drilling: The ice drill auger's effective length is: 39 inches, rotating diameter: 8 inches, weight: 6.4 lbs/2.9 kg. It is lightweight, sharp, and durable. It can be used with an electric drill to meet your daily needs..
  • Nylon Material: The auger bit adopts nylon material, the main shaft, aluminum, which are lightweight, durable, and rust-proof. Meanwhile, it has good tensile, impact resistance, and flexibility, saving your labor and time..
  • Sharp & Sturdy Blades: The blades are made of premium steel, sharp and sturdy, cut through ice like a hot knife through butter. In addition, the edges come with a blade guard, which can keep the blades from damage and extend the blades' service time..
  • Extension Rod & Adapter: If you want to extend the length of the ice auger, you can detach the adapter and top plate from the shaft, then attach the extension rod to shaft.
  • finally, fix it with a special bolt. Extension rod length: 11.8"/30 cm. The ice auger bit is equipped with an adapter and a top plate. The adapter allows you to connect the auger with various kinds of the drill. The top plate can prevent you....
Check Stock

RHKING Two Stage Auger Adapter Precision Durable Alloy Steel for use with Auger Drill

  • ✅ APPLICATION:The adapter allows you to use your Power drill with Auger Drill. Suitable the 3/4 inch internal diameter of the auger shaft and 7/8inch internal diameter of the auger shaft..
  • ✅ MANUFACTURE:Auger adapter are made of alloy steel with high strength, Quenching treatment, being hard chrome plated and good wearing resistance. good impact resistance and good deformation resistance..
  • ✅ SIZE:Auger adapter Overall Length: 5inch,Body Diameter: 0.71inch and 0.86inch.Bolt hole is 0.25inch hole and 0.31 inch hole. Fits drill chucks 1/2 inch and larger..
  • ✅ EASY TO USE:Three flat milled sides to fit in 1/2 inch drill chuck,flat surfaces large enough，Longer shank for the Power drill to clamp securely without slipping..
  • ✅ DIY DESIGN:If you use it for an ice auger, you can DIY make a Auger Stop plate, install it on the step of the adapter, and clamp it with the inner hole internal diameter 5/8 Shaft Collar, so as to prevent the auger from falling into the water..
Check Stock

DOMINOX Electric Ice Augers for Ice Fishing with 8"x39" Ice Auger Head and High Performance Lithium-Ion Battery 40V 4Ah, Ice Augers for Ice Fishing and Ice Drilling

  • 【Safety Stop Button】: Electric ice auger designed with an easy to reach "Safety Stop Button" for your safety..
  • 【Forward & Reverse Operation】: Ice fishing auger can easily drill ice holes with forward operation. Reverse operation function to quickly eject ice slush without having to shovel..
  • 【Flexibility】: Allowing the flexibility to extend the length of auger as ice thickness increases..
  • 【LED Light】: LED Light allows you to dig in the dark or for your night fishing fun..
  • 【Environment Protection】: Ice fishing auger for cordless drill no gas, no oil and no fume..
Check Stock