Reviews Dewalt 7a Drill Driver In

DEWALT 20V MAX XR Brushless Combo Kit, Compact 6-Tool (DCK684D2)

  • DCD780 DEWALT 20V MAX* 1/2-inch drill/driver in cordless tools combo kit features two speed transmission (0-600/0-2000RPM).
  • DCS381 DEWALT 20V MAX* reciprocating saw with keyless blade clamp in the cordless tool set allows for quick blade change without touching blade or reciprocating shaft.
  • DCF885 DEWALT 20V MAX* 1/4-inch Impact Driver as one of the essential construction tools features 3 LED light ring with 20 second delay to provide visibility without shadows.
  • DCL040 DEWALT 20V MAX* LED worklight delivers 110 lumens of light output.
  • DCS393 DEWALT 20V MAX* circular saw with 6-1/2-inch carbide blade can cut 2x4's at a 45-degree angle in a single pass.
  • DCR006 Jobsite Bluetooth Speaker is powered by AC/DC and runs off of 12V and 20V MAX* DEWALT battery packs..
Check Stock

DEWALT 20V MAX XR Brushless Drill/Driver Kit with Tool Connect Bluetooth, Cordless (DCD792D2)

  • LAST SEEN feature helps reduce wasted time and money by providing the street address of where your compact Dewalt drill/driver was last in range of your Tool Connect enabled device.
  • DEWALT 20V MAX drill with brushless motor delivers up to 75% more runtime than 18V NiCad brushed motors.
  • Easily and quickly assign tools to jobsites and users on the Tool Connect Inventory Manager software, increasing accountability and reducing lost tools.
  • Receive diagnostics on your compact power drill/driver like internal coin cell battery life, temperature, number of trigger pulls, and how long the tool has been running.
  • Set "disable when out of range" alerts to help deter unauthorized use or theft.
  • Once you've downloaded the Tool Connect app, easily pair with the app by holding down the pair button on the tool foot for 3-5 seconds.
  • Includes a default Home mode and 3 programmable modes to customize speed and light brightness.
  • Customize the brightness and delay of the integrated LED light.
  • Integrated blue LED light indicates when your compact drill/driver is paired with your Tool Connect.
  • Lithium battery products are shipped with a small amount of charge in the battery (for health of the cells). Always charge battery before use.
Check Stock

DEWALT 20V MAX* Cordless Drill Combo Kit , Brushless, (DCK277C2)

  • DEWALT brushless motor of cordless drill combo kit delivers up to 57% more run time over brushed.
  • Compact (5.4-inch front to back), lightweight (2.0 lbs) Impact Driver design of the corodless tools combo kit fits into tight areas.
  • Compact (7.52-inch front to back), lightweight Drill/Driver in thed drill/ impact driver combo kit is designed to fit into tight areas.
  • Ergonomic comfort grip handle provides ideal balance and tool control.
  • LED light with 20-second trigger release delay provides increased visibility in dark or confined spaces.
  • Impact driver's one-handed loading 1/4-inch hex chuck accepts 1-inch bit tips.
Check Stock

IF I EVER UK DRILL

  • DCD771C2 drill/driver is compact, lightweight and fits into tight areas.
  • Drill/driver high performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications.
  • 100-Piece accessory set features some of DEWALT's most popular bits that cover an array of uses.
  • Accessory set includes Impact Ready, Tough Case, and Pilot Point drive and drill bit sets.
Check Stock

Detailed Reviews Of DeWalt’s Industry Leading Best Selling Power Hand Tools

  • DEWALT DCK265L 18-Volt Compact Lithium-Ion Drill/Impact Combo Kit.
  • DEWALT DWP849X 7-Inch/9-Inch Variable Speed Polisher with Soft Start.
  • DEWALT DW715 15-Amp 12-Inch Compound Miter saw.
  • DEWALT DW735X 13" Two-Speed Planer Package.
  • DEWALT DCK655X 18-Volt XRP 6 Tool Combo Kit with Impact Driver.
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Makita, Ridgid, Bosch, Ryobi, More (2 Pack, Standard)

  • Don’t get stuck up a ladder without the bit you need! Five storage locations allow you to keep your most used ¼" hex bits on your drill or driver so you always have what you need when you need it. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Ridgid and Makita drills and drivers. See pictures for specific fitments..
  • Don’t let your bit holder get in your way or stop you from using your belt hook! The Hardwerks bit holder mounts on either the left or right side of your impact driver or drill. Bit holders that only mount on the right side of your tool get in the way when you are grabbing your driver and make bit changes harder. The Hardwerks bit holder works with Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Tired of dropping screws, holding them in your mouth or fishing for them in your pocket? Stick your screws securely to the magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Your bit holder won’t rotate, loosen or fall off! Hardwerks bit holder is screwed securely to your drill or driver. Bit holders attached with adhe....
Check Stock

Milwaukee 2801-22CT M18 18-Volt Lithium-Ion Brushless Cordless Compact 1/2 Inch Drill/Driver Kit with 2 Batteries 2.0 Ah, Charger and Case (Non-Retail Packaging)

  • DCD709 hammer drill/driver in the cordless drill combo kit is compact at only 6.9-inch front to back designed to fit in tight spaces.
  • DCD709 hammer drill/driver in the cordless tools combo kit is lightweight at only 2.5 lbs..
  • DCF809 Impact Driver of the drill/ impact driver combo kit is only 5.1-inch in length to fit in tight spaces..
  • DCF809 Impact Driver has 1700 in-lbs of torque delivering the power you need to get a majority of applications done.
  • Both tools have a DEWALT built brushless motor for efficient performance and runtime.
Check Stock

Milwaukee 2696-24 M18 Cordless Compact Combo Tool Kit

  • DCD780 DEWALT 20V MAX* 1/2-inch drill/driver in the cordless tools combo kit features two speed transmission(0-600/0-2000RPM)12345.
  • DCS381 DEWALT 20V MAX* reciprocating saw with keyless blade clamp in the cordless tool set allows for quick blade change without touching blade or reciprocating shaft.
  • DCS393 DEWALT 20V MAX* circular saw with 6-1/2-inch carbide blade as one of the essential construction tools can cut 2x4's at a 45-degree angle in a single pass.
  • DCL040 DEWALT 20V MAX* LED worklight delivers 110 lumens of light output.
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Ridgid, Makita, Bosch, Ryobi, More (2 Pack, Premium)

  • Phillips, torx, square drive? Stop running around searching for the right bit. Keep them right on your impact driver or drill with five storage locations which you to keep your most used ¼" hex bits with you at all times. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Makita and some Ridgid drills and drivers. See pictures for specific fitments..
  • Mounts on either side of your tool and works with or without the belt clip. Many bit holders only mount on the right side of your tool so they get in the way when you are grabbing your driver and make bit changes harder if you are right handed. The Hardwerks bit holder works with or without Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Wondering where to put loose screws while you are working or how to carry that long drill bit? Stick your screws securely to the exposed magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Upgrade to the premium bit holder for the strongest neodymium magnet available so that even the heaviest bits won’t fall out when your driver is hanging upside down ....
Check Stock

DEWALT 20V MAX* XR Cordless Drill Combo Kit Brushless 5-Tool DCK594P2

  • DCD996 in cordless drill combo kit has a DEWALT-built high power, high efficiency brushless motor that delivers up to 75% more runtime vs. 18V NiCad....
  • DCD996 has a heavy-duty 1/2-inch ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength of the cordless tools....
  • DCF887 has a DEWALT built brushless motor for longer run time of drill/ impact driver combo kit.
  • DCF887 has 3-speed settings for versatility with Precision Drive for added control.
  • DCS570 uses a 7-1/4-inch blade to provide 2-9/16-inch Cutting Capacity at 90 degrees.
Check Stock