Reviews Degree Measurement Tool

eBoot 4 Pieces Math Geometry Tool Plastic Clear Ruler Sets, Protractor, Triangle

  • 4 Pieces math set: 4 in 1 geometry tool contains a 6 inch/ 15 cm straight ruler, a 4 inch protractor, 2 x triangle ruler (45 and 60 degree).
  • 2 Sides measurement ruler: transparent ruler and through it you can read conveniently.
  • straight and triangle rulers with inch and metric scales on them.
  • Portable and durable: geometry tools are constructed of plastic material, lightweight, easy and handy to be put into your school bags or in your desk.
  • Easy to measure angle: 4 inch/ 10 cm 180 degree protractor, 45 and 60 degree set rulers make it convenient to get the angles' degrees.
  • Wide application: math geometry tool set are useful tools for architects, engineers, artists, designers, students, teacher and so on.
Check Stock

ChgImposs Screw Thread Pitch Cutting Gauge Tool Set, Stainless Steel Centre Gage with 55 Degree Inch System & 60 Degree Metric System

  • Used to measure the pitch of the thread and the tooth-shaped corner.
  • It sets 4pcs centre gage 55 Degree Inch System & 60 Degree Metric System, 52 pcs.
  • Center Gage use to grind and position thread cutting tool on a lathe. Typically used to check the thread size determination is correct.
  • All 52 pcs was made by stainless steel, not easy to rust. Ensure the accuracy of measurement..
  • Package Include: 1 x 52 Blade thread gauge.
  • 1 x ISO Metric 60°centering gauge thread gauge Tool.
  • 1 x English Wyeth 55°centering gauge thread gauge Tool.
  • 1 x American Standard 60°centering gauge thread gauge Tool.
Check Stock

General Tools 102 0-Inch to 1-Inch .001-Inch Graduation Micrometer

  • 【Material】- This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
  • 【Parameter】- 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles..
  • 【Comprehensive Angle Range】- This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °..
  • 【Suitable Utilization】- Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills..
  • 【Professional Measurement Tool】- This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection..
Check Stock

XCSOURCE Right Angle 90 degree Vertical Horizontal Laser Line Projection Square Level Laser Square

  • Laser Level Square is an easy to use leveling tool..
  • Projects horizontal and vertical laser "chalk lines" on surfaces..
  • Dual diodes for making 90 degree laser beams on any surfaces..
  • Two suction cups allow the laser level square to be mounted onto the surfaces alignment guide for 90-degree layout-calculate and turning angles in 5-degree increments..
  • Kindly noted: the angle of the laser line can be changed according to the angle scale, saving your time of measurement and marking..
Check Stock

General Tools Angle Protractor #17 Stainless Steel Square Head - Measuring Tool for Carpenters & Woodworking Hobbyists

  • PROTRACTOR ARM: It's constructed of durable stainless steel and features a 6" adjustable arm for setting the bevel, transferring angles, and finding your measurement. It's an essential tool and gift idea for a fellow carpenter, student, or machinist..
  • CONSTRUCTION PROTRACTORS: This square head protractor has a 0 to 180-degree semi-circle scale in forward and reverses directions to measure all angles on the job. The 3-3/8" x 2" head helps anchor the protractor against objects to hold it in place..
  • ANGLE FINDER: Quickly and easily identify your angles with our rust-resistant measuring compass. The metal arm locks into place with a knurled thumb nut, allowing you to gauge the measurement of the inclination accurately..
  • MEASUREMENT TOOLS: The project possibilities are endless when using our high-quality square-head protractor tool. You can master the art of building new cabinets, tables, chairs, wooden desks, framing, and various furniture makings..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

GemRed Digital Level and Protractor, 2 in 1 Digital Angle Finder LCD Display, 10inch/270mm/360°Angle Gauge for Woodworking/Carpenter/Construction/DIY Tools (Black)

  • 【Accurate Data & 360°Measuring】 The GemRed level tool applies Absolute Angle Sensor , to ensure the accuracy of data up to ±0.15°, resolution is 0.05°. 360°measuring range to meet your production needs. Conversion between absolute measurement and relative measurement. Absolute measurement mode and relative measurement mode can switch freely according to demand.
  • 【2 in 1 & Easy Used】 The Angle Finder both measure the angle and level. Calculating quickly and accurately, it’s your good partner in woodworking, construction, mechanical work and life. ☆Easy to measure all kinds of angle and draw lines.Easy calibration and Zero setting. ☆V-notch end for checking 90° degree quickly..
  • 【Practical LCD Display】 ☆Backlit LCD Display:Large LCD display with backlight, means that you can read clearly even in a dim environment. ☆Analogue quadrant showing ☆Display always reads upright: no matter which way it is turned..
  • 【Locking & Holding Function】 ☆Locking Function: Good locking function could lock the measurement at any angle. ☆Holding Function:Display has a hold function to freeze movement for accuracy.If you want to use data holding function, you need to press the HOLD button rather than twist the knob..
Check Stock

Digital Resistance Ground Earth Tester UT501A 1000V Insulation Resistance Tester Earth Ground Resistance Earth Ground Resistance Meter Multimeter Voltmeter Earth Resistance Tester

  • MULTI-FUNCTIONAL MULTI-METER INSULATION TESTER--This insulation resistance tester can measure insulation resistance, AC voltage, etc.
  • HIGH ACCURACY AND STABLE PERFORMANCE DIGITAL EARTH RESISTANCE TESTER--High degree of accuracy, stable performance, easy operation and reliability.
  • MULTI-FUNCTIONAL AND ECONOMICAL SUPPORTS EASIER OPERATION--Support automatic measurement, low battery indication, LCD backlight, alarm light display, alarm buzzer.
  • WIDELY APPLICATIONS FOR DAILY USE--Widely used for insulation resistance measurement for insulation materials and various kinds of electric equipments such as transformer, electric machines, cables, switches, electrical appliances.
  • IDEAL TOOL FOR ELECTRICAL EQUIPMENT TESTING AND INSPECTING--It is a ideal tool for electric equipment maintenance, testing and inspection.
Check Stock

PREXISO Angle Gauge Magnetic, Angle Finder - Digital Level Electronic, Protractor Angle Cube Inclinometer for Woodworking, Table Saw, Construction, Masonry, Machinery, 0-360° Bright Backlit Display

  • 2 Measurement Modes & 4 Units – Turn on the equipment to directly enter the ABSOLUTE measurement mode, and press the ZERO button to switch to the RELATIVE measurement mode.
  • This equipment fast measurement displays angles in degrees, %, mm/m and IN/FT.
  • Magnetic V Groove Base & Auto Reversible Display – The pocket angle finder features sturdy V groove edges, a strong magnetic base.
  • When upside down, the LCD display with backlight auto rotates, ensure fast and clear reading.
  • TIPS: If the angle gauge is used in an incorrect position (tilts diagonally over 30 degree), screen display ERROR to remind users to use correctly.
  • Accurate Angle – This angle finder tool measures, sets angles, and if a surface is level.
  • PREXISO angle gauge has higher resolution of 0.05°and higher accuracy of ±0.1°at 0°and 90 °, and ±0.2°at other angles.
  • The measuring range is 0 to 360° (4×90°), buzzer will alert when it’s within ± 1° to the horizontal or vertical position.
  • Compact Design & Calibration Function – Mini angle gauge fits in your pocket or the storage bag that comes included to protect the equipment surface from wear.
  • The equipment has been calibrated in the factory. In order to ensure lasting accuracy, the equipment also has calibration function, so ....
Check Stock

Angle Gauge Drill Bits, 3Pcs S/S Angle Gauge Measurement Drill Sharpener Tool Set Including Drill Diameter, Drill Bits and General Angle Gauge with Case

  • Professional Measurement Tool: This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection.
  • Professional and Standard Parameters: 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles.
  • Comprehensive Angle Range: This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °.
  • Suitable Utilization: Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills.
  • Durable for Long-Time Use: Made of high quality stainless steel, this set of angle gauge has high hardness, and it is durable for long-time use.
Check Stock

Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout Board [ADA1782]

  • Can detect the humidity and temperature of the surrounding environment.
  • Humidity measurement range: 20%-95% (0 degree-50 degree range), humidity measurement error: +-5%.
  • Temperature measurement range: 0 degrees - 50 degrees, temperature measurement error: +-2 degrees.
Check Stock