Reviews Dac Amp For Iphone

USB C DAC OTG Cable 0.5ft/15cm for iPhone13/iPad8/iPod Oxygen-free Copper Core, iOS15 to Type C Male Adaptor for Amplifier, Fiio BTR 5 Q3S BTR3K KA3, LT-LT1, qudelix 5k, HiBy FC3 5 FD3, HIDIZS S9 PRO

  • ...lity is more pure. Oxygen free copper core, lower resistance, longer service life, high purity, low oxygen content and high conductivity. High-quality material makes a flexible, tough and durable cable. Premium nylon braided cable..
  • [High performance]: connect USB-C DAC to iPhone, iPad, iPod. It enables the maximum achievable USB 2.0 speed for data transfer, and the highest possible charging current supported by your devices. Support USB-C camera connects to iOS devices with Lightning port..
  • [Plays Nice with Cases]: the compact 8 pin connector fits most case cutouts..
  • ⛔[Incompatible List]: Please do NOT buy this cable if you plan to use it with the following devices. This cable is NOT compatible and will NOT work. FiiO M11, Creative SXFI Amp are incompatible with iOS device. Any other MFi-certified DACs. Please check your device first. It can NOT be used to charge iPhone/iPad/iPod..
Check Stock

Topping DX7 Pro LDAC Headphone Amplifier ES9038PRO DAC DSD1024 32bit/768kHz BT/USB/Opt/Coax/AES/IIS Input Amplifiers(Black)

  • ♫ DAC&Headphone Amplifier: DX7pro is an all-in-one machine.
  • it uses uses ESS DAC ES9038PRO+XMOS XU208 chips,the distortion is .
  • ♫ Multiple Input Interfaces: USB supports PCM32bit/768KHZ DSD512(native).
  • IIS supports 32bit/768kHz DSD64-DSD256(Dop) DSD64-DSD1024(Native)..
  • ♫ DAC+Pre Amp application: DX7 Pro has a "Pre amp" output mode. When you connect to an amplifier, a power amp/active speaker, you can adjust the volume on the DX7 Pro to solve the system settings..
  • ♫ The DX7 Pro uses digital volume adjustment, the left and right channels were controlled by digital so there will no unbalanced occurs..
  • ♫ Pure DAC Application: DX7Pro has a built-in "DAC" output mode. At this mode,in order to achieve the best performance and cooperate with other devices in the system, the headphone amp wilt turn off and the volume will be uncontrollable..
Check Stock

Gustard R26 Discrete R2R MQA DAC K2 Clock Dual Native DSD Decoder XMOS Balanced LDAC DAC with Remote Control (Silver)

  • 【Discrete R2R DAC】R-2R ladder DAC converts the digital signal to analog signal by switching resistor's array. 【XMOS XU216】DAC-R26 using 2nd XMOS XU216, supports up to PCM768 & DSD512..
  • 【1Bit DAC Native】1 Bit DAC, supports DSD 512 ( via USB ) and DSD 1024( via IIS ) .The DSD stream is decoded by the independent 1 Bit DAC without DSD to PCM converting..
  • 【Clock Synthesis】DAC-R26 adopts ultra-low noise clock synthesizer K2 clock . Provide an accurate clock from the local oscillator or external clock input. The interference from the input source clock is avoided..
  • 【LPF Of DAC-R26】The discrete circuits of the DAC-R26 control every detail of sound and performance. LPF is specifically designed for the D/A converter using discrete devices..
  • 【Full MQA decoding】The DAC-R26's USB/OPT/COAX/AES/IIS inputs all support full MQA decoding, PCM44.1kHz-384kHz. Presenting you with a complete and rich music scene..
Check Stock

Topping DX5 MQA DAC Headphone Amp USB/Optical/Coaxial Full MQA Decoding DA Converter Bluetooth LDAC XLR/RCA Output 6.35mm/4-Pin XLR Headphone Output 1800mW×1800mW NFCA Headphone Amplifier (Grey)

  • 【2×ES9068AS DAC】With careful engineering and attention to details from out engineering team, TOPPING are able to achieve 0.00009% THD+N by 2 × ES9068AS. This provides pristine sound quality..
  • 【MQA Full DAC】Products with a full MQA Decoder, like DX5 DAC, unfold the file to deliver the highest possible sound quality. At this level of playback you are hearing what the artists created in the studio..
  • 【Bluetooth Transmission】To get even better sound quality from Bluetooth, TOPPING does not use the built-in DAC of QCC5125 and connect it's digital signal to 2×ES9068AS to decode..
  • 【NFCA Headphone Amp】The new DX5 has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMS and power hungry high impedance headphones nicely..
  • 【Multiple Output Mode】Adapt to different usage scenarios, DX5 has 4 output mode: Headphone Amp / Headphone Amp&Line out / DAC / Pre-amplifier..
Check Stock

RME ADI-2 DAC FS Ultra-Fidelity PCM/DSD DA Converter with AKG K240 Studio Pro Headphones & 10-Pack Straps Bundle

  • Dual AK4499EX & AK4191 DAC Chips ▶️ The GUSTARD A26 DAC combines two AK4499EX DAC chips with one AK4191 modulator from Asahi Kasei Microdevices. With independent power supply and grounding for each channel, separate digital-analog architecture eliminates interferences from the beginning..
  • FPGA Exclusive Technology & Streamer / Renderer ▶️ Adopting FPGA exclusive technology, the A26 features signal routing, clock management, 2rd order PLL, DOP decoding, and Depop for PCM & DSD. Besides, utilizing Streamer/Renderer, an easy access to high-quality online streams, the GUSTARD A26 can supports Roon /UPnP /HQ Player NAA at present, and there will be more protocols in the future..
  • Clock Synthetization & XMOS XU216 Solution ▶️ Equipped with K2, ultra-low noise clock synthesizer, the A26 DAC features a precision clock from local oscillators or external clock in. It is worth mentioning that the GUSTARD A26 can replace the input signal' s clock with precision oscillators (local or external) and avoid the interference from the input source' s clock. In addition, the A26 DAC applies XU216 from XMOS, supporting up to PCM768 (with MQA-support) and ....
Check Stock

Crisis Adapter, Durable Adapter Converter, Support 6-Port Automatic Speed Up for WINXP WIN7

  • A double headphone amplifier in true high-end quality.
  • A USB DAC like no other - the most versatile and capable one a high-end AD/DA front end and headphone amp for iPad/ iPhone.
  • a multi-format converter (AES, SPDIF, ADAT) with monitoring function.
  • A DSD record and playback solution an ad/DA front end for audio measurement at up to 768 kHz sample rate.
Check Stock

ELITEED 3in1 Lighting to 3.5mm,Headphone Adapter for iPhone, Dual Earphone Jack Audio and Charging Adapter,Headphone Splitter for iPhone 14/13/12/11/XS Max/XR/8/7 Plus /6/ iPad,Support iOS 10 to16

  • 【Dual Headset Splitter 】The 3 in 1 iPhone Charge and Listen Adapter supports Dual 3.5mm Headphone Jacks to work at the same time and charge,Support listen music and two person enjoy movie together.This iPad pro headphone adapter designed for iPhone lovers, good friends, families to share happiness and entertainment..
  • 【Hi-Fi Voice Audio&Faster Charging】This iPhone Adapter for Headphone Jack uses 100% copper core,built in DAC smart chip support 96 KHZ and 24 bit audio output for i0S headphone provides high fidelity and lossless audio.This iPhone Dongle Adapter Support 2.4A fast charging function,the charging speed is increased by 1.5 times. Don’t worry run out of power while enjoying music or movies..
  • 【Small and Portable&Plug and Play】This Headphone Splitter 3.5mm is easy to carry and you can play without drivers. It is lightweight and easy to carry. You can put it in a backpack or handbag.This iPad Headphone Adapter is very suitable for your daily life or leisure time.This is a great choice whether you use it yourself or as a gift for family or friends!.
  • 【Wide Compatibility】This Dual Headphone Adapt....
Check Stock

Fosi Audio K5 Pro Gaming DAC Headphone Amplifier Mini Hi-Fi Stereo Digital-to-Analog Audio Converter USB Type C/Optical/Coaxial to RCA/3.5MM AUX for PS5/PC/MAC/Computer

  • The upgraded version of Fosi Audio Q4 adds microphone function, K5 Pro headphone DAC amp combo, next-generation audio converter with unrivaled internals, more outstanding performance, and richer audio details. Born for Gaming. K5 Pro stereo DAC headphone amplifier is perfect for your home gaming system, equivalent to an external sound card, suitable for PS5/Computers/PC/MAC/active speakers, etc..
  • K5 Pro USB DAC converts USB Type C/Optical/Coaxial signals to 3.5MM AUX and RCA signals with low distortion and great dynamic range. Unique design: 2-in-1 USB Type C interface charging port and audio input means K5 Pro is compatible with your phones(Note: Your audio source must be connected to the USB-A/C port.). RCA output can be connected to an amplifier or powered speakers on your desktop. 3.5 MM AUX and microphone interface can drive 16 Ohm to 300 Ohm headphones..
  • K5 Pro headphone DAC adopts the Texas Instruments NE5532 op-amp chip. The circuit design implementing this DAC has been optimized for a low-noise floor and clean sound. Compared to the last generation Q4, K5 Pro has noticeably improved on overall sound quality, so you can get immersed in your music even more easily..
  • Product Specifications: K5 Pro with master volume/bass/treble control and input m....
Check Stock

Topping DX3 Pro+ ES9038Q2M Bluetooth 5.0 LDAC Audio Decoder DSD512 DAC AMP NFCA Headphone Amplifier Pre Amplifier (Black)

  • Bluetooth 5.0 LDAC transmission ：DX3Pro+ has the certification of Hi-Res Audio Wireless and LDAC. It uses newest QCC5125 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode..
  • NFCA circuit ：The new DX3 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely..
  • Pre-amplifier function ：Adapt to different usage scenarios, DX3 Pro+ has 4 output modes: Headphone Amp, Headphone Amp+ Line out, DAC, and Pre amplifier..
  • PA3s is the best power amplifier for DX3 Pro+： PA3s has RCA+TRS balanced inputs. When used with DX3 Pro+, the TRS balanced input can be used to input other audio sources. The output power of 80W x [email protected]Ω, 10%THD+N, 65W X [email protected]Ω, 1%THD+N can be adapted to most situations where speakers are used..
  • Bluetooth headphone amp / Bluetooth DAC application： Connect the Bluetooth of the phone, tablet or notebook to DX3 Pro+, and connect the power amplifier, active speakers or headphones to the DX3 Pro+'s output, then DX3 Pro+ becomes your Bluetooth....
Check Stock

PALOVUE Lightning Headphones Magnetic in-Ear Earphones MFi Certified Earbuds with Mic Controller Compatible iPhone 14 13 12 11 Pro Max iPhone X XS Max XR iPhone 8 P iPhone 7 P EarflowPlus Metallic Red

  • ♫PREMIUM SOUND - Built-in DAC & Φ10 dynamic driver finely-tuned to produce detailed, crisp and clear sound with powerful bass.
  • ♫PLUG N PLAY - NEW generation MFi-Certified lightning earphone flawlessly compatible with iPhone/iPad/iPod.
  • ♫STYLISH & ERGONOMIC DESIGN - Lightweight aluminum body.
  • comfortable in-ear design that naturally matches your ear canals and isolates ambient noise.
  • ♫MAGNETIC EARBUDS – Convenient to carry around and easy to get out of tangled mess.
  • ♫UNIVERSAL CONTROL & MEMS MIC - Wake up Siri, take calls, play music & volume control with one exquisite piece of controller.
Check Stock