Reviews Cylinder Valve Protector Cap

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • ...icle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. But if 0.8L is not enough, remember to add new oil in time.
  • Easy To Use: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
  • Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • Specifications and Accessories: 34 oz used fluid bottle, 24 oz filler bottle. 4 Master Cylinder Reservoir Adapters: 1.2....
Check Stock

WADEO Propane Adapter 1lb to 20lb, QCC1 Propane Refill Elbow Adapter with Gauge and ON-Off Control Valve for 1LB Propane Tank to Be Refilled Gas from 5~40 LB Propane Tank

  • 90 Degrees Design: WADEO propane elbow refill adapter with ON/OFF control valve is easy to install and no tools required, and it with hand-wheel grip for tightening, you can easily connect your large cylinder to 1LB propane tank..
  • Additional 1 LB Propane Bottle Cap: The 1 LB propane bottle cap is useful for your camping stoves, home applications, barbecue, propane heater or others equipments that use 1 lb propane tank. You don't need to spend extra money to buy the cap..
  • How to Refill the Gas: Refill the 1LB camping bottle with propane gas by using a 90-degree propane filling adapter, you should turn the large propane tank upside down and place it securely in the corner of the dining table so the liquid can flow out..
  • Upgraded With Gauge For Accurate Reading: Specially designed with a gauge at the side connect with 1lb propane tank, our propane refill adapter allows you to read and monitor the gas volume in your 1lb propane cylinder more accurately. Luminous pointer and gas level indicator make it easy to read even in the dark..
  • ❗❗Attention: Because the gas is highly flamm....
Check Stock

New 60 cu ft Aluminum Argon Cylinder with CGA580 Valve

  • New, high-quality 20 cf steel helium cylinder with CGA580 valve.
  • 5.24" diameter and 14.76" height (Cylinder).
  • Heavy-duty brass constructed helium balloon inflation valve.
  • Inflation valve complete with regulator and gauge.
  • All cylinder ship empty. Please consult your local compressed gas supplier for filling needs..
Check Stock

Maymom Pump Parts Compatible With Spectra S2 Spectra S1, Incl Flanges (28mm) Valves Tubes Bottles Backflow Protectors, Not Original Spectra S2 Accessories Replace Spectra Flange Spectra Duckbill Valve

  • "Product Content: 28mm Flange (x2 Large Flange), Backflow Protector(x2), Tube(x2), Duckbill Valve (x2), Bottle with a Two-Piece Travel Cap (x2). All Products compatible with Spectra 9+, Spectra S1, Spectra S2 Breastpump. This kit does NOT include Dome Caps and Nipples..
  • "Maymom-made products. Not Original Spectra S1 Accessories. Not Original Spectra S2 Accessories. Not Original Spectra Pump Parts. All pump parts made by Maymom LLC..
  • "Maymom pump parts perform as well as OEM parts. Interchangeable and compatible with Spectra pump parts. Ideal Spectra replacement for Spectra Duckbill Valve (Spectra Valve), Spectra Backflow Protector, Spectra flange, Spectra Tubing, Wide-Neck Spectra Bottle. Maymom flange size available: 15mm, 17mm, 19mm, 21mm, 24mm, 25mm, 27mm, 28mm, 30mm, 32mm..
  • "The two-piece cap of Maymom bottle features rewritable surface top for labeling date or baby's name for daycare or daily storage use. Write with regular ball pen or dry erase marker. Erase with soapy water..
  • "Comply with FDA regulations for plastic materials that contact food. Material does NOT contain BPA. Can be sanitized with, boiling water, water steam or microwave-steam bags..
Check Stock

GOOFIT Completed Cylinder Head Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Pit Quad Go Kart Dirt Bike

  • intake valve mounting hole distance:45mm/1.77".
  • Exhaust valve mounting hole distance:45mm/1.77".
  • Spark plug:A7TC(Please Be Carefully Check The Goods Appearance,Size,Shape Before Ordering)..
  • Completed Cylinder Head Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Pit Quad Go Kart Dirt Bike.Not Replacement for 125cc Cylinder Head with 23mm and 28mm Intake and Exhaust valves.
  • 52.4mm LIFAN 110CC 125cc Cylinder Engine.
  • Cylinders are used to hold gasoline and air,Where the mixture burns,Expands dramatically,And pushes the piston,Which transmits this force to the crankshaft..
  • High quality cylinder replacement part.High toughness,Corrosion resistance,Rustproof and durable.Has a good heat dissipation structure design,Providing reliable performance and long life service..
  • Warranty:We are always available to help our customers.If you are not satisfied with the order,please leave us a message.Wish you have a happy shopping experience,we are committed to providing the best service..
Check Stock

Dbgogo CGA-320 Keg CO2 Regulator, Brewing Dual Stage Gauge Beer Kegerator Pressure Regulator with 1/4” & 5/16” Quick Disconnect Barb Connectors and Safety Pressure Relief Valve for Co2 Cylinder Tank

  • Heavy duty CGA-320 beer keg co2 regulator, no leaks: upgraded brewing beer kegerator pressure regulator features a heavy-duty forged brass body for sturdiness and durability. CGA-320 co2 regulator fits all standard co2 cylinders tanks with CGA-320 outlet. CGA320 cylinder fitting features a hexagonal design for easy tightening with an adjustable wrench. just put a white sealing washer into gas cylinder connector, which can prevent connection between co2 cylinder and keg regulator from leaking..
  • Stable, easy-to-read, drift-free dual gauge: Dbgogo co2 tank regulator features dual pressure gauges, 0-60 psi output pressure gauge displays amount of co2 pressure provided to beer keg, 0-3000 psi cylinder pressure gauge displays amount of co2 pressure left in cylinder. dual pressure gauge regulator can accurately and stably monitor working pressure in home-brewed beer carbonation system at any time, and reading is simple, which is very suitable for brewing carbonated beverages, beer and tea..
  • Easy to manually adjust system pressure, locking ring maintains stable pressure setting: co2 regulator has 2 manual adjustment knobs to control entire brewing system pressure. you can set beer keg pressure by slowly turning pressure adjustment knob in “+” direction. tu....
Check Stock

125 cu/ft Oxygen Welding Gas Cylinder Tank CGA 540 - EMPTY

  • The 20 cf oxygen tank comes with a CGA-540 valve for use with oxygen gas.
  • Cylinder is shipped empty with no product or shoulder labels.
Check Stock

AKWH 15810-RKB-J01 VTEC Solenoid Spool Valve with Gasket Replacement for Hon-da Ody-ssey V6 3.5L 2005-2007 Pilot FWD Acc-ord V6 3.0L 2006-2008 15810RKBJ01

  • ...ol Valve OEM Part Number: 15810-RKB-J01 15810RKBJ01. Replacement for 2005-2007 Acc-ord Hybrid, 2005-2007 Ody-ssey EX / EXL / EXL-T, 2006-2008 Pil-ot 2WD MODELS ONLY OF TRIMS: LX / LXVP / EX / EXL / EX-SE P/N 15810-RKB-J01.
  • VTEC Solenoid Spool Valve Replacement for: 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head..
  • VTEC Solenoid Spool Valve Replacement for: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head..
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multi....
Check Stock

Engine Valve Cover with Gaskets, Bolts & Oil Filler Cap Compatible with 2011-2020 Chevy Cruze Sonic Trax Volt | Cadillac ELR | Buick Encore 1.4L Turbo Replace# 55573746 25198498 264-968 25198874

  • ✅【 REPLACeMENT WITH FRONEZER VALVE COVER】 The valve cover seals the top of your cylinder head to keep debris out of the oil and prevent damage to the valves. Plastic valve covers can warp or crack from heat over time. Valve covers can also warp or bend if the bolts holding them down are over-tightened. If you notice that oil is leaking, your oil is often low, or you smell gas when your engine is running, our quality valve cover can perfectly resolve these problems..
  • ✅【FITMENT】 Compatible with 2011-2015 Chevy Cruze 1.4L | 2012-2019 Chevy Sonic 1.4L | 2015-2019 Chevy Trax 1.4L | 2011-2015 Chevy Volt 1.4L | 2014-2016 Cadillac ELR 1.4L | 2013-2019 Buick Encore 1.4L.
  • ✅【REPLACES PART NUMBERS】 264-968, SK510A05, 25198498, 25198874, 25198877, 25203036, 55573746.
  • ✅【COMPLETE SOLUTION】This valve cover kit comes with 1 * new Valve Cover, 1 * new Oil Filler Cap , 1 * new Valve Cover Gasket and new Bolts. The pcv valve is pre-installed on the valve cover. This valve cover kit is a complete solution for your replacement..
  • ✅【TWO YEARS WARRANTY】 This vavle cover kit has undergone a rigorous end-of-line testing for reliability So we offter TWO Years Warranty. If you're not 100% satisfied with our products, simply return it for a full ref....
Check Stock

ABN 8in Valve Spring Compressor, 3-6.5in Capacity, 6in Clearance – Small Overhead OVH Engine Repair Compressing Tool

  • EASY COMPRESSION: The ABN Valve Spring Compressor Small Overhead OVH Engine Repair Compressing Tool allows you to effortlessly disassemble and reassemble valves.
  • For correctly fitting, installing, and removing automotive valve springs.
  • FITS YOUR VEHICLE: Suitable for small to medium engines with overhead valves.
  • Works with a cylinder head on your workbench or any OVH head removed from the block.
  • 3-inch to 6.5-inch (7.6cm to 16.5cm) capacity with a 6-inch (15.2cm) throat clearance.
  • GRIP COMFORTABLY: Molded and cushioned handle that will give you more leverage.
  • Automatic locking and an easy grip handle help you to keep the tool in place and gain slip-free leverage.
  • EASY TO USE: Close the clamp until the fork-type portion of the tool fits snugly on the spring cap and the screw pivot is on the valve face, then screw in the threaded rod to compress the spring.
  • Automatically locks in place and is simple to release, lift, and compress.
  • BUILT TO LAST: Constructed from high-quality metal that eliminates tool flex.
  • Strong and adjustable cam-action works perfectly in line with the valve and can get into even the narrowest valve chambers.
Check Stock