Reviews Cylinder Head Rocker Arm

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed FITS LS2 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0

Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor..
We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure..
LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearin....

Professional assistant left auxiliary arm accessories for tire raking machine.
Cylinder diameter: Φ75cm/29.53in, cylinder rod diameter: Φ30cm/7.87in.
Elbow arm diameter: Φ63cm/24.80in, square arm size: 40x60cm/15.75x23.62in.
Tire head: Italian tire head, please measure the diameter and length of the cross arm pin as shown in the picture, and provide us with the data before placing an order.

NEW! REPLACEMENT FOR YAMAHA TIMBERWOLF 250 YFB250 2X4 / 4X4 CYLINDER HEAD ASSY 1992-2000.
THIS BRAND NEW AFTERMARKET KIT HAS BEEN INSPECTED FOR THE HIGHEST QUALITY & THE HIGHEST GRADE MATERIALS HAVE BEEN USED IN THE MANUFACTURE OF THIS KIT.
PURCHASE INCLUDES: CYLINDER HEAD ASSEMBLY. ( HEAD INCLUDES: EXHAUST & INLET VALVES, VALVE SPRINGS, CAMSHAFT, ROCKER ARMS, VALVE RETAINERS ). CAMSHAFT COVER. VALVE COVERS. CAMSHAFT PLATE. HEAD VENT TUBE. O-RING KIT. NUT, BOLT & WASHER KIT. NGK SPARK PLUG..
REPLACEMENT FOR OEM Part # 4BD-11101-03-00.

Adds 3,000 PSI holding power on slip and press fit assemblies.
Well-suited for permanently locking studs and press fits.
Replaces set screws and snap rings and also locks against vibration loosening.
May require heat or special tools for removal.
Suggested Applications: Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts.

【Max Payload of 22 lbs】Made of lightweight and durable aluminum alloy, the Moman video pan head goes to handle more devices on it in the marketing, absolutely fits for outdoor travelling photographers..
【Multi-Ways for Shooting Angle】3-way Pan & Tilt ball head allows to adjust 360° horizontally and 180° vertically by rocker arm, each of them can be loosened and locked independently for versatile angle shooting!.
【Great Compatibility】Standard 1/4" Quick Plate and 3/8" Screw thread on the bottom, 3-Dimensional Fluid Ballhead works perfectly with tripods, monopods, sliders, DSLR cameras, brackets, etc..
【360 Degree Swivel】With 360° dial for level with numbered scale around the base designed for Rocker Arm Tripod Ballhead, you can adjust your camera in the position you need and take panoramic shots easily..
【Safer Universal Use】Designed Anti-Slip Pads, Single Handle Ballhead mounts your camera quick and firmly. Safe screws installed in both sides of the base, Tripod Pan Head prevents camera accident dropping..

【Cylinder Bore】: 47mm / Non-EGR Cylinder.
【Apply to】: GY6 4 stroke 49cc 50cc 60cc 80cc engine upgrade for most of chinese scooter, atv and go karts.
【Parts included】:GY6 80cc Cylinder Head with 64mm valve, 47mm Bore Cylinder Block, Set of 47mm Piston Assy, Piston, Rings and Wrist Pin, Full Set of Engine Gasket, 6pins CDI, Ignition coil, 4pin AC regulator, relay, A7TC Spark Plug, Set of Intake Manifold and Muffler Bolts, and Exhaust locking ha, Set of 8.5 Gram roller , Rocker Arms, Valve Seals, Oil Pump Assy with Driving Gear, Camshaft, Camshaft chain 82, belt 699*18*30, Chain adjuster, Oil screen, spring, cover and oil seal, Starter clutch.
【Fit to】Roketa, Sunl, Baja, Taotao, Panterra, Redcat Tank Giovanni Wildfire Xtreme Seaseng Qlink Yiben Jonway Jmstar, Vento.

LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....

Removes springs and valve guide seals without removing cylinder head.
Used by removing rocker and fastening tool to stud with nut, then use an air-hold fitting and compressed air to hold valves up.

BH-Motor New Valve Gasket Set Fit for 794152 Replaces # 690190 794114 796584 699168 692410.
Replace for 692236 Exhaust Gasket ,690968 Valve Seal.