Reviews Cylinder Head For Vw

EWK Spark Plug Boot & Wire Removal Tool, Ignition Coil Puller for VW Audi T10112

  • 【 Work Smart 】 This spark plug boot removal Tool T10112 is a special tool for quickly remove the spark plug lead without destroying any component..
  • 【 Time Saver 】 The angled shaft fits well into narrow plug cavity with no manifold dismantling needed, reach the plugs on cylinder #2 and #3 smoothly..
  • 【 High Quality 】 Shaft and boot end are constructed from premium stainless steel for maximum strength and longevity. The ergonomically grip convenient to use..
  • 【 Applications 】 Volkswagen – New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC).
  • Audi – 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD). *Not recommended for non-VW/Audi plug leads..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
Check Stock

8MILELAKE 14pc Radiator Pump Pressure Leak Tester Kit Vacuum Pressure Cooling System Tester

  • 8MILELAKE Tester helps detect internal and external leaks Perfect for head gasket failure detection (which side of block or which cylinder leaks). 8MILELAKE never authorized other sellers to sell except freebird trading..
  • Thumb-operated relief valve for quick and easy pressure release and self-locking quick-disconnecting components..
  • Locate system leaks from: Head gasket. Header tank. Radiator and heater cores. Water pump plugs, hoses and housings..
  • Quick-release couplings and a high-powered pump with large, easy-to-read dial are featured in this kit and the kit is packed in a large blow molded case which is supplied with operating instructions..
  • cooling system pressure testing kit with an updated selection of adaptors to fit popular European and Japanese vehicles including Alfa, Audi, BMW, Benz, Chrysler, Citroen, Ford, Honda, Mazda, Mercedes, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Suzuki, Toyota, Volvo, VW. Also includes non-specific adaptors for other makes and models. Comes with 8MILELAKE brand on the case..
Check Stock

CARBYNE XZN Triple Square Spline Drive Impact Bit Socket Set - 8 Piece Chrome Molybdenum Cr-Mo Steel | Metric M5 to M16 | 1/2 inch Drive

  • Commonly used on a variety of European vehicles such as Volkswagen, Audi, BMW, Mercedes-Benz, and Porsche..
  • Chrome Molybdenum (Cr-Mo) Steel - For Strength and Durability. Impact Rated. Manganese Phosphate Finish - For Corrosion Resistance.
  • Contains 8 Pcs. – ½” Dr. XZN Triple Square Spline Drive Impact Sockets - Metric: M5, M6, M8, M9, M10, M12, M14 and M16..
  • For cylinder head bolts, and other applications on European cars including BMW, Mercedes, VW, Audi, and Porsche.
  • Tools Meet & Exceed ANSI Standards. Lifetime Warranty..
Check Stock

15810-RKB-J01 Vtec Solenoid Spool Valve with Gasket for 2005-2007 Hond-a Pilot Accord Odyssey 2.4L 3.0L 3.5L 15810RKBJ01

  • Reference OEM Number: 15810-RKB-J01. Please check the part number on your old part housing before purchase. Only part number is the unique ID..
  • Application Vehicle: 2008 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • Application Vehicle: 2006 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hond-a engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate alternate lobes on the camshaft and c....
Check Stock

15810-RKB-J01 Vtec Solenoid Spool Valve with Gasket for 2005-2007 Hon-da Pilot Accord Odyssey 2.4L 3.0L 3.5L 15810RKBJ01

  • Reference OEM Number: 15810-RKB-J01. Please check the part number on your old part housing before purchase. Only part number is the unique ID..
  • Application Vehicle: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • Application Vehicle: 2006 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate alternate lobes on the camshaft and c....
Check Stock

AKWH 15810-RKB-J01 VTEC Solenoid Spool Valve with Gasket Replacement for Hon-da Ody-ssey V6 3.5L 2005-2007 Pilot FWD Acc-ord V6 3.0L 2006-2008 15810RKBJ01

  • ...ol Valve OEM Part Number: 15810-RKB-J01 15810RKBJ01. Replacement for 2005-2007 Acc-ord Hybrid, 2005-2007 Ody-ssey EX / EXL / EXL-T, 2006-2008 Pil-ot 2WD MODELS ONLY OF TRIMS: LX / LXVP / EX / EXL / EX-SE P/N 15810-RKB-J01.
  • VTEC Solenoid Spool Valve Replacement for: 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head..
  • VTEC Solenoid Spool Valve Replacement for: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head..
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multi....
Check Stock

IAP Performance 043101355CK Complete Dual Port Cylinder Head with Sensor Hole for VW Beetle

  • 【Premium Material】Made from quality steel with black coating, corrosion and rust resistance, sturdy and durable..
  • 【Function】This tool is attached to the cylinder head, used to lift the cylinder head from the engine..
  • 【Application】Suitable for Detroit diesel 60 series engines..
  • 【Easy & Convenient to Use】Remove the cylinder head bolts and install the cylinder head lifter bracket (J–35641–A) using the bolt hole at the inboard center, then attach a suitable lifting hook to the eyelet in the lift bracket, and lifter the cylinder head off the engine..
  • 【100% Satisfaction Guarantee】Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Cylinder Head Lift Bracket, simply return it for a full refund in 30 days..
Check Stock

ClutchMaxPRO Heavy Duty OEM Clutch Kit with Flywheel with Slave Cylinder Compatible with 2013-2015 VW Beetle 2010-2015 Golf 2009-15 Jetta 2012-15 Passat TDI 2.0 Turbo Diesel (CP02157HDWSFW-CK)

  • ...al support to ensure 100% satisfaction.
  • KIT INCLUDES: HD Nodular Solid Flywheel (replaces heavy and inconsistent factory dual mass flywheel), HD Premium Pressure Plate, HD Premium Sprung Hub Clutch Disc (9-7/16" (240 mm) x 15/16" (23.8 mm) x 23 spline), CSC Slave Cylinder Bearing Assembly, A set of 6 each flywheel mounting bolts, A set of 6 each pressure plate mounting bolts, Alignment Tool and Installation Guide *Note: Clutch and flywheel must be used together as a set without reusing existing components..
  • LIMITED WARRANTY: All ClutchMaxPRO products comes with excellent customer support and limited manufacturer warranty of 12 months or 15,000 miles that covers issues related to performance, fitment and function. Buy with confidence!.
  • THE FOLLOWING PRODUCT IS COMPATIBLE WITH:​​​​​​ 2013 - 2015 VW Beetle TDI (2.0L DOHC 4cyl Turbo Diesel), 2010 - 2015 VW Golf TDI (2.0L DOHC 4cyl Turbo Diesel), 2009 - 2015 VW Jetta TDI (2.0L DOHC 4cyl Turbo Diesel), 2012 - 2015 VW Passat TDI (2.0L DOHC 4cyl Turbo Diesel) *​​​​​​​Note: Clutch and flywheel must used together as a set without reusing any existi....
Check Stock

GreenYi RVC Delay Timer Relay Filter for VW RCD330 Passat Tiguan Golf Touran Jetta PQ MIB Conversion Cable for Rear View Camera

  • USEFUL KIT FOR OUR VW CAMERA---This product is designed for the VW camera(ASIN: B07BSFBQM3) in our store.
  • RCD 330 PLUG PORT TO RCA ADAPTER---It can convert rcd 330 plug to RCA plug to make your head radio work with cameras with RCA connector.
  • RELAY FILTER---It can stablize the voltage to be 12V, no flashing image any more.
  • Delay Timer---It will show the camera image longer.
  • DESIGNED FOR VW---Only compatible with VW cars like Passat / Tiguan / Golf / Touran / Jetta / Sharan / Touareg....
Check Stock

PAGOW Spark Plug Boot Wire Removal Tool Ignition Coil Puller for Volkswagenn Audi VW Hand Install Repair Tool

  • Best Compatibility: The spark plug wire puller installer can perfect match with Volkswagen and Audi vehicles with standard prong plug caps on each side (not recommended for non-VW/Audi plug leads). Volkswagen – New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC).
  • Audi – 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD)..
  • Size Inforamtion: The size of spark plug boot removal tool kit: 12.6inch (32cm) overall length, 3.75inch x 0.4inch x 1.2inch (9.5cm x 1cm x 3cm) handle, 9.25inch (23.5cm) shaft, 2.2inch x 0.8inch (5.6cm x 2cm) boot end..
  • Wide Applications: The spark plug puller tool suitable for Bora, Mercedes, Smart, and other Volkswagen and Audi vehicles with similar engines and standard prong plug caps on each side..
  • Easy to Use:Perform spark plug change when engine is cold to prevent the heads from stripping. After pulling the plugs, we recommend applying lubrication to make the job easier. When installing wires, refrain from pushing too hard without the tabs aligned on the tool to prevent the boot end from spreading and getting stuck..
  • Material:The handle of ignition coil puller is made of hard p....
Check Stock