Reviews Cutting Insert

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set with 10 Extra Carbide Inserts in Fitted Box, 2387-2004plus

  • Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Check Stock

HHIP 2065-2500 2-1/2 Inch x 3/4 Bore 45 Degree SE Indexable Face Mill

  • The close pitch, super positive, 45 degrees major cutting edge angle, milling cutter reduces cutting forces and permits high cutting speeds with limited power machines. Screw M5x12.
  • SEHT-432 (SEHT120408) Tin coated Carbide Insert(Item #6017-0432).
Check Stock

Accusize Industrial Tools 1/2'' Cut-Off Holder, Parting Tool, Mgehr08-2J of 2387-2004, Insert Not Included

  • Insert model for this holder: Carbide insert TiN Coated MGMN-2 Double End Cut-off.
  • For the Cutting Parameters, please refer to the product image..
  • The cutting-off tool can only do cut off jobs. In regard to the other regular cutting, it's better to use the other 6 pieces of the set..
  • Please note that this tool holder comes with NO insert installed. Only a holder..
Check Stock

OSCARBIDE 3/8

  • Mini Turning Tool holders with 3/8'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

Accusize Industrial Tools 5/8\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0058

  • Smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
  • 9pcs hex screw, Hexagon key and Aluminum fitting case..
  • *** Insert kit Item#: 2988-0058INSERTS (Sold Separately on Amazon)***.
Check Stock

APS Compatible with 05-07 Magnum Lower Bumper Stainless Mesh Grille Insert N19-H61357D

  • ❎ Replacement (Cutting Required) 1 pc Grille Insert. Black powder coated T-304 stainless steel wire woven mesh grille insert and stainless steel....
  • Wire size: 1.8mm spacing size: 6.7mm x 6.7mm.
  • [Important] Replacement (Cutting Required).
  • All necessary hardware and instruction are included. Grille insert only, logo or emblem, frame or shell is NOT included..
Check Stock

Accusize Industrial Tools 3/8'' Shank 7 Pc Indexable Carbide Turning Tool Set in Fitted Box, 2387-2003

  • Black oxided smooth finish on each turning tool holder style and shank size..
  • Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screws and wrench included. 7Pcs indexable turning tool holder. 7Pcs TiN coated C6 carbide inserts. 7Pcs hex screws. 3Pcs hexagon keys..
  • Details, recommended cutting speeds and specifications are in the description.
Check Stock

JoyTube 35 Pcs Thread Repair Kit, Stainless M6 x 1mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

  • 【Drilling】Clear the damaged threads with a standard drill. Please pay attention that for fluteless taps bigger holes are required..
  • 【Checking】Check that the thread and pitch of the tap and the bolt match..
  • 【Tapping】Use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)..
  • 【Install】Place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Never work against the thread direction as the tang could break..
  • 【Ideal Tool】M6 x 1mm Thread Repair Insert Kit is ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals..
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC2135 Grade, Multi-Layer Coating, 2 Cutting Edges, N123F2-0318-RM, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • INSERT TYPE: 2 edge round, full profile grooving insert.
  • INSERT SEAT SIZE F = matching insert & tool holder.
  • EASY TO CHANGE INSERTS: no torque wernch needed for correct clamping and quick release.
  • RM = Round Medium full radius geometry, high cutting edge line securtiy with optimized chip breaking design.
  • START CUTTING VALUES: Stainless Steel - fnx 0.006 in/r(0.003-0.008), vc 330 sfm(290-415), fnz 0.016 in(0.009-0.022).
  • Steel - fnx 0.006 in/r(0.003-0.008), vc 410 sfm(365-500), fnz 0.016 in(0.009-0.022).
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC3115 Grade, Multi-Layer Coating, 2 Cutting Edges, N123F2-0318-RM, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • INSERT TYPE: 2 edge round, full profile grooving insert.
  • INSERT SEAT SIZE F = matching insert & tool holder.
  • EASY TO CHANGE INSERTS: no torque wernch needed for correct clamping and quick release.
  • RM = Round Medium full radius geometry, high cutting edge line securtiy with optimized chip breaking design.
  • START CUTTING VALUES: Cast Iron - fnx 0.006 in/r(0.003-0.008), vc 540 sfm(480-650), fnz 0.016 in(0.009-0.022).
  • Steel - fnx 0.006 in/r(0.003-0.008), vc 690 sfm(610-840), fnz 0.016 in(0.009-0.022).
Check Stock