Reviews Cutter Grinding Machine M 400

JUTTIRA Electric Grinder for Spices and Seeds 400W Mini Seed Grinder Extra Fine Spice Grinder/Mill/Crusher Electric Rapid Grinding Spices, Seasonings, Seed, Condiment, Grain

  • 【400W SUPER FINE GRINDING】This small grinder for spices and seeds featured sharp 304 stainless steel blades and a 400W powerful motor ensure rapid and even grinding. Meeting all your needs on grinding, and solving other problems like slow grinding, low capacity, long grinding time, inability to control coarseness, etc..
  • 【4.3OZ LARGE CAPACITY】High power with 35000 r/min allows you to grind 120g of herbs or spices within 3-15 seconds. Max capacity:4.3oz/120g. The capacity of the ingredients should not exceed 2/3 of the capacity of the grinder bowl, and better to cover the blade..
  • 【ONE-BUTTON OPERATION】One button operation mini grinder for spices, and the lid is used as a switch.
  • Just press to start and release to stop, no vibration, low noise. You can keep pressing the lid within different time length so as to control the coarse, medium and fine grinding state. It takes 3 to 5 seconds for coarse grinding, and only8 to15 seconds for fine grinding..
  • 【VIEWING LID AND SAFETY DESIGN】The transparent lid can effectively prevent powder splashing, and you can observe the grinding process from a coarse to a fine powder. In addition, it makes the grinder safer, since the blade will only start to rotate when the lid is on the cup and pressed dow....
Check Stock

Face Mill Shoulder Cutter BAP400R-50-22-4T 90 Degree Square Shoulder Indexable CNC 4 Flutes Face Mill Shoulder Milling Cutter with Wrench and Box

  • GREAT TOOL FOR CNC MILLING MACHINE--This BAP400R-50-22-4T Square Shoulder Face Mill Cutter is designed for CNC milling machine.
  • HIGH GRADE ALLOY STEEL MATERIAL--This Square Shoulder Indexable Face Milling Cutter is made of high quality alloy steel, which is featured with high hardness and good durability to ensure a long term service.
  • GREAT REPLACEMENT TOOL FOR YOU--This Face Shoulder Milling Cutter is regarded as an essential mill parts for milling machine, and it is very convenient to use it to replace the broken one or the old one.
  • USEFUL BOX FOR CONVENIENT STORAGE AND PROTECTION--There comes with a plastic box for easy storage and carriage, and it can provide good protection for the tool as well.
Check Stock

INTBUYING U3 R8 Universal Multi-functional Cutter Grinder Sharpener End Mill Drill Bit Lathe Tool 110V

  • 【Scope of Application】 The bench grinder is used for grindering. Suitable for different kind of cutters, such as drill bit, lathe bit,end mill by using different acceories.Suitable for cutting edge milling machine, cutting plotter, line cutting machine, computer engraving machine, marking machine, etc..
  • 【Good Performance】High grinding precision, flexible rotating parts, low vibration and low noise. The tool holder part is equipped with bearings and is wear-resistant..
  • 【Save Cost】The grinding indexing head can be operated in a variety of positions to facilitate grinding any angle and shape, realize the multi-purpose function of one machine, and save costs for companies with multiple tool repair needs..
  • 【Main Accessories】1. 5 types R8 Collects：0.15”=4mm, 0.2”=6mm, 0.3”=8mm, 0.4”=10mm, 0.5”=12mm；2.White steel grinding wheel: suitable for grinding high-speed steel tools.3.Alloy grinding wheel: suitable for grinding tungsten steel and carbide milling cutters..
  • 【Parameter】Grinding Dia.：ф0-100mm(0-3.94″)；Taper Angle:0°-180°；Relief Angle:0°-45°；Negative Angle:0°-26°；Grinding Spindle；5200r.p.m.；Cup grinding wheel:100x50x20mm(3.9*2.0*0.8″)..
Check Stock

Mini Mounted Point Set, 50 pcs.

  • The transformer has over current, over voltage, over heat protection.
  • With a drill bit, it becomes a hand drill, with a grinding wheel, it becomes a hand grinder, and with a milling cutter, it becomes a hand mill, very easy to use.
  • Wide application range and flexible to operate.
  • The handheld machine has seven standard grinding tools which is varied.
  • Suitable for processing wood, engineering plastics and soft metals.
Check Stock

TECHTONGDA Cutter Grinder Drill Sharpener Sharpening Machine for End Mill Twist Drill Cutter Grinding Tool 220V R8 Collects

  • 5 R8 collects are equipped with the multi-functional cutter grinder sharpener. The size of the collects are 0.15”, 0.2”,0.3”, 0.4”, 0.5”..
  • 2 kind of grinding wheels are included. One is made of white corundum and one is made of metal..
  • Two fine-tuning bearings guarantee the accuracy and the sharpening quality. The universal index head is provided at 24 positions so that any particular angle of shape can be obtained..
  • The sharpener is mainly used for grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiuses cutters or negative taper angle of cutters..
  • Packaged in wooden case for better protect the machine from being injured in transit..
Check Stock

PVC Pipe Inside Cutter Plumbing Inside Cutter Internal Plastic Pipe Cutter with Grinding Wheel for Plastic Pipe Cutting Replacement (Classic Color)

  • Package includes: you will receive 1 piece of PVC pipe inside cutter and 1 piece of grinding wheel, which are helpful for replacement on your household and technical work and serve 2 different functions of cutting and grinding.
  • Lasting material: the plumbing inside cutter is made of carbon steel material with durability and hardness, and the smooth surface is resistant to rust and wear, providing a long service life and practical experience of working.
  • Practical design: the internal plastic pipe cutter is designed with the saw-toothed blade for fast cutting, and the grinding wheel helps to make the cut surface smooth and flat.
  • Collocating with the grinding wheel, the pipe cutting tool would effectively improve your working efficiency.
  • Convenient and portable: with the small size of 10.5 x 3 cm/ 4.1 x 1.2 inch and individual weight of 93 g, the plumbing internal cutter is compact and easy to carry, which is suitable for cutting plastic pipes from inside.
  • Easy to install: the plumbing tool cutters are available to attach to the power drill and move to cut the pipes.
  • It is appropriate to be handheld and simple to apply for household working and experienced people.
Check Stock

Electric Knife Sharpener Multi-Functional with 3 Abrasive Wheel and a Pair of Cut-Resistant Glove Adjustable Angle Button Grinding Tool Use for Chisel, HSS Drill Scissor and Kitchen utensils

  • Multifunctional flexible grinding tool: Two sharpening wheel 180 grit and 360 grit, use for Fine grinding. Spare diamond screws instead of the original plastic screws, and a small wrench is included to easily replace the screws and diamond wheels. The machine is not suitable for wet and dry use, When using, no need to add water for debugging.
  • Adjustable rotary electric knife: Easy operation Non-slip rubber feet for stability Adjustable guide, Adjustable cutter head angle: 15~50 , Strong magnet adsorption, Suitable for 6-51mm knife width, 3-13mm drill bit, sharpening adapter with high-strength engineering plastic body, powered durable.Before use, please insert the knife into the correct card slot to avoid sharpening it.
  • DIY helical household tackle: Three disassembly grinding head design, Blade's Edge Keeper. Speed reaches 1350/min, it is very effective for grinding drills, scissors, chisels and axes. Covers the functions of grinding, sharpening, polishing and rust removal. It needs to be debugged before turning on the machine. Generally, there will be the sound of grinding wheel turning.
  • Multi-angle design, suitable for equipment of different shapes. Lightweight and convenient, the body is only 1.2kg. Multi-scene, multi-purpose, sharpen knives/HSS bits/....
Check Stock

Inside Pipe Cutter Internal Plastic Pipe Cutter PVC Pipe Inside Cutter Plumbing Inside Cutter with Grinding Wheel and 6 Replaced Saw Blades, 0.86'',0.98'', 1.25'',1.37'',1.73'',1.96'' in Diameter

  • PVC Cutter Tool: you will receive 1 piece inside pipe cutter, 1 piece grinding wheel and 6 pieces replaceable saw blades, which are nice combinations to help you cut and grind the pipes efficiently, bringing you a lot of convenience.
  • Size Information: our inside cutters for plastic pipe measures 10.5 x 3 cm/ 4.1 x 1.2 inches, the grinding wheel is 3 cm/ 1.18 inches in diameter, and the saw blades are 5 cm/ 1.96 inches, 4.4 cm/ 1.73 inches, 3.5 cm/ 1.37 inches, 3.2 cm/ 1.25 inches, 2.5 cm/ 0.98 inches and 2.2 cm/ 0.86 inches, can meet your various cutting demands.
  • Practical Cutting Tools: our internal pipe cutter is designed with a serrated blade for fast cutting, and the grinding wheel helps to make the cutting surface smooth and flat with the grinding wheel, can effectively improve your work efficiency.
  • Multiple Purposes: this plastic tubing cutter is appropriate for cute PVC or plastic from the inside and other ordinary pipe cutting tools cannot be cut, ideal for most kinds of plumbing repairs, such as shower drains and so on.
  • Solid and Quality: made of carbon steel in the inner tube, our inside pipe cutter for PVC pipe is sturdy and serviceable, has a high hardness and smooth surface, rustproof and wear resistant, can serve you for a long time.
Check Stock

SL-3 Tungsten Carbide Burr Rotary File Taper Shape with Radius End Double Cut with 1/4\Shank for Die Grinder Drill Bit

  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed being too slow. However, it's ideal to start the cutting slow, increasing the speed as you go along. High speeds will prevent clogging in the flutes of your burrs. The 1/8 carving burrs can bear the speed range of 6000-50000 revolutions per minute..
  • 【Widly Use】The 3mm and 6mm head diameter carbide cutting burrs set is widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, cylinder head porting and sculpting..
Check Stock

Demeras Mini Hand-Held Lathe Z10001 20000rpm Wide Application Range Over Heat Protection for Wood

  • The transformer has over current, over voltage, over heat protection.
  • With a drill bit, it becomes a hand drill, with a grinding wheel, it becomes a hand grinder, and with a milling cutter, it becomes a hand mill, very easy to use.
  • Wide application range and flexible to operate.
  • The hand held machine has seven standard grinding tools which is varied.
  • Suitable for processing wood, engineering plastics and soft metals.
Check Stock