Reviews Cut Gaskets

Stant 25138 Thermostat Gasket

  • Stant’s STAT LOK adhesive-backed thermostat gaskets cut installation time by as much as 50%.
  • The adhesive backing holds the thermostat securely centered in the counter bore, leaving both hands free to align and bolt down the outlet casting.
  • No sticky, toxic gasket cement is required.
  • With a knuckle-saving Stant Stat Lok gasket holding the thermostat in place, the thermostat won’t drop out or become misaligned and cause the mounting flange of the outlet casting to crack..
  • Gaskets are cut to specific application requirements..
Check Stock

Permatex 80016 Form-A-Gasket #2 Sealant, 3 oz. , Blue

  • Slow-drying, non-hardening sealant approved for use in aviation as well as automotive applications.
  • Designed for dressing/sealing cut gaskets on flexible/stamped parts.
  • Temperature Range: -65F to 400F (-54C to 204C).
  • Suggested Applications: Valve cover gaskets, and oil pan gaskets.
Check Stock

Permatex Hi-Temp Rtv Silicone Gasket Maker 3.35 Oz. -65 To 500 °f

  • Formulated For Hi-Temp Applications, Or Heavy-Duty Use.
  • Replaces Almost Any Cut Gasket, And Coats Pre-Cut Gaskets To Increase Reliability.
  • Makes Reliable 'Formed-In-Place' Gaskets That Resist Cracking, Shrinking And Migrating.
  • Temperature Range Of -65F To 650F Intermittent.
Check Stock

Permatex 80022 Sensor-Safe Blue RTV Silicone Gasket Maker, 3 oz. Tube

  • Effectively replaces almost any cut gasket.
  • Makes reliable 'formed-in-place' gaskets that resist cracking, shrinking and migrating.
  • Coats pre-cut gaskets to increase reliability without fouling oxygen sensors.
  • Temperature range of -65 degrees fahrenheit to 500 degrees fahrenheit intermittent.
  • Suggested Applications: Valve covers, oil pans, timing covers, water pumps, thermostat housings, transmission pans.
Check Stock

GX200 Predator 212 Pull Start Recoil for Generator Power Washer Predator Pressure Washer go Karts Water Pump Scooter go cart Small Engine Drift Trike Log Splitter

  • FITMENT - The intake gaskets fit all 5.5hp and 6.5hp engines. Including predator 212, Gx200, Gx160, 196cc, Tillotson engines. The intake gaskets are a direct replacement..
  • EQUIPMENT - Used on generator, Champion power washer, mini bike, Go kart, predator 212 Log splitter, Predator 212cc Water pump, baja minibike and many more..
  • IN THE BOX - The red pull start recoil is a direct replacement for your old pull start assembly. Only 3 bolts are required to mount the pull start. Bolt size is M6x1.25 and 10mm long.
  • QUALITY - The intake gaskets have been cut very precisely and each gasket has been reviewed and passed QC. Intake gaskets are cut from a thick gasket material and very sturdy..
  • ALL RETURNS 100% MONEY BACK GURANTEED - If you are not satisfied with the gasket kit do not hesitate to send it back for a 100% MONEY BACK GURANTEED. please contact us for all other questions..
Check Stock

Permatex 85409 Ultra Rubber Gasket Sealant and Dressing, 1 oz. tube, 1 Ounce tube

  • Non-hardening, soft-setting formula makes gasket repositioning quick and easy.
  • Condition gaskets for longer life and seal potential leak paths.
  • Provides outstanding oil and fluid resistance.
  • Suggested Applications: Designed for use on all cut and formed rubber gaskets, but also great to condition and extend the life of composite, paper and cork gaskets.
Check Stock

Loctite 37394 Anaerobic Gasket Maker - 1.69 oz.

  • RELIABLE ADHESION. This high temp silicone sealant works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces). Resists cracking, shrinking & migrating..
  • FLEXES WITH MOVEMENT. Enhances load bearing & shock absorbing characteristics of the bond area. Eliminates the need for preformed, paper, rubber & cork gaskets..
  • INCREASED OIL RESISTANCE. Tolerates contamination by oils (e.g. motor oils, corrosion protection oils, cutting fluids)..
  • IMMEDIATE CURING. Operating strength of 15 PSI within 1 minute of application. Equipment can return to service immediately!.
  • LOCTITE READY GASKET replaces almost any cut gasket or coat pre-cut gaskets to increase reliability..
Check Stock

Permatex High Tack(TM) Spray-A-Gasket(TM) Sealant (80064)

  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket.
  • eliminates the need for pre-formed, pre-cut, paper, rubber or cork gaskets.
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute.
  • protects against leaks and seepage caused by vibration and thermal expansion.
  • Formulated to meet or exceed performance standards for long-term sealability, durability and handling.
  • this material is used on OEM production lines and specified in their service parts programs.
  • Temperature Range: -75°F to 450°F (-59°C to 232°C) continuous, 500°F (260°C) intermittent.
  • Suggested Applications: Automotive, heavy duty, and marine gaskets, valve covers, gearbox covers, pumps, oil pans, thermostat housings, water pumps.
Check Stock

Loctite 231230 Gray 5999 Gasket Adhesive/Sealant, Paste, -75 to 625 Degrees F Temperature Range, 300 mL Cartridge

  • RELIABLE ADHESION. This high temp silicone sealant works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces). Resists cracking, shrinking & migrating..
  • FLEXES WITH MOVEMENT. Enhances load bearing & shock absorbing characteristics of the bond area. Eliminates the need for preformed, paper, rubber & cork gaskets..
  • OIL RESISTANCE. Tolerates minor contamination by oils (e.g. motor oils, corrosion protection oils, cutting fluids)..
  • CONVENIENT CURING. Tack-free in 30 minutes. Full-strength in 24 hours..
  • LOCTITE 5015 RTV BLUE SILICONE replaces almost any cut gasket or coat pre-cut gaskets to increase reliability..
Check Stock

4\ CAMLOCK Gasket, CAM and Groove, Green VITON/FKM, (10 gaskets)

  • GREEN VITON / FKM, Precision Lathe Cut Gaskets.
Check Stock