Reviews Curved Sanding

252 Pieces Drum Sander Set Including 240 Pieces Nail Sanding Band Sleeves and 12 Pieces Drum Mandrels for Dremel Rotary Tool

  • ►【MULTI-FUNCTION】120 Grit Commonest And Standard Size Sanding Bands Use For Smoothing Surface And Curved Edges. Widely Used On Smooth Surfaces And Curved Edges, Polished Soft And Hard Materials Such As Home Improvement, Engraving, Metal, Carpentry, Jade, Art And Other Diy Activities..
  • ►【EASY INSTALLATION】Drum Mandrels With Self-Expanding Rubber Cushion, Making The Sanding Bands Close To The Manderl Firmly And Acheiving Better Finishing.
  • In Case The Sanding Band Fall Apart From The Mandrel While Using, Please Make Sure The Drum Have Been Screwed Tightly And Wear Closely To The Sleeve.
  • ►【PRECISION TIGHT, NON-SLIP FIT】Our self-expanding rubber cushioned drum mandrels were especially designed to embrace the sanding bands with a snug fit, keeping the sandpaper sleeves in place, for extra fine artwork. Designed to expand once the nut on the top of the drum is tightened. Easily slide bands over drum & tighten screw for non-slip fit. Our drums should fits most other sanding bands if the sizes are compatible..
  • ►【REUSABLE】Our Drum Mandrels Were Produced With Heavy Duty Rubber For a Long Lasting Endurance. The Shanks Was Ideally Constructed With a Solid High Quality Metal That Will Easily Chuck Into Any Drill Bit And Stay Put. May Always Re....
Check Stock

Karebac 99450 Flex-Block Sanding Block for PSA Abrasives

  • Flexible longboard hand sanding block. Excellent on curved and flat surfaces.
  • Uses 2-3/4" PSA longboard sheets, 2-3/4" PSA "sticky back" rolls, vinyl Faced for easy stick on and pain free removal.
  • Flexible is excellent with finer grits where precise finish is desired, but does work well with all grits.
  • Excellent sanding block for all types of applications where hand sanding is required.
Check Stock

Tank Drum Kosmosky 12 30 cm KSY-209 Element of Air 2-sided/B major D# minor/Hand Pan/Steel Drum/Tongue drum/Singing bowl

  • EASY TO USE - Take the hard work out of hand sanding curved surfaces like the inside of bowls and boxes! Guinevere Basic Sanding Kit easily connects....
  • TECHNOLOGY - Inflatable bulbs are gently pumped up through an air inlet in the drive shaft and conform to the shape of your work, whether concave,....
  • VERSATILITY - Our patented inflatable sanders work on wood, metal, rubber, leather, plastic, stone and glass. Ideal for difficult profiles, finishing....
  • QUALITY AND SAFETY - Every sanding sleeve is made to specifically fit each inflatable sander. The sanding cloth material is highly flexible and made....
  • COMPLETE KIT - King Arthur’s Tools Guinevere Basic Sanding Kit includes 1 inflatable round sander with 4 round sanding sleeves + 1 inflatable drum....
Check Stock

Karebac 99451 Flex-Block Sanding Block for PSA Abrasives

  • Flexible longboard hand sanding block. Excellent on curved and flat surfaces.
  • Uses 2-3/4" PSA longboard sheets, 2-3/4" PSA "sticky back" rolls, vinyl Faced for easy stick on and pain free removal.
  • Flexible is excellent with finer grits where precise finish is desired, but does work well with all grits.
  • Excellent sanding block for all types of applications where hand sanding is required.
Check Stock

AUSTOR 132 Pieces Sanding Drum Set with Free Box Including 120 Pieces Drum Sander Sanding Sleeves and 12 Pieces Drum Mandrels for Dremel Rotary Tool

  • Package include - 120 pieces sanding bands in 3 diameters: 1/2", 3/8" and 1/4", 40 pieces per size.
  • and 12 pieces shank sanding drum in 3 diameters: 1/2", 3/8" and 1/4", 4 pieces per size.
  • Essential accessory - 120 grit commonest and standard size sanding bands use for smoothing surface and curved edges, polishing both soft and hard materials, like home improvement, artwork and woodworks.
  • Easy installation - drum mandrels with self-expanding rubber cushion, making the sanding bands close to the manderl firmly and acheiving better finishing.
  • in case the sanding band fall apart from the mandrel while using, please make sure the drum have been screwed tightly and wear closely to the sleeve.
  • Note: please wear professional safety glasses to protect your eyes, because maybe there are flying grits when the sanding drum turning at high speed.
  • the sanding drum will be attritted more quick on metal surface, please replace sleeves timely in order to achieving the better sanding effect.
  • Bonus - come with a free plastic box, convenient for store and fetch.
Check Stock

Sanding Sponge, Auerllcy Coarse/Medium/Fine/Superfine 4 Different Specifications Sanding Blocks Assortment,Washable and Reusable.

  • 4 different grit includes: 60, 80, 120, 220. Coarse, Medium, Fine and superfine. Sanding sponge Size: 4 x 2.8 x 1 inch..
  • Grit printed on the sanding sponge, easy to distinguish and use, no need to put all the sand blocks together to compare, at a glance..
  • Washable and reusable sanding block, can be used directly in water..
  • The sanding sponge using high density sponges as base material, made from high-quality brown corundum with special treatment and special glue formula..
  • Suitable for grinding any irregular geometric curved surface, wet or dry, portable and handy..
Check Stock

BUCKTOOL Professional Bench Belt Sander for Metal 4 in. x 36 in. Belt and 8 in. Disc Sander with 1HP Direct-drive Motor, BD4802

  • BENCH BELT SANDER FOR METAL&WOOD: The sanding disc and belt paper is professional for metal polishing, and the sanding disc paper is hook and loop design for easy replacing, the aluminum sanding belt dust outlet can prevent melting, with the knife grinding accessories can be installed on the belt plate and it can be removed when not in use.This machine can be also proceed with wood working.
  • INCREASE EFFICIENCY: The 1HP direct drive motor is more powerful and professional design than the woodworking machine BD4603&BD4801, the motor direct drive design is 25% more efficient than the traditional design, it can maximize the development of 1 HP fully enclosed induction motor, providing quiet but powerful performance.
  • MORE CONVENIENT DESIGN: The switch box is placed on the top of the machine, making the operation more convenient, the belt tension is adjustable, the sturdy cast aluminum base with rubber foot prevents vibrations, the dust port can be removed and enlarge work area which is convenient for polishing long materials.
  • MULTI-ANGLE SANDING: The sanding belt work table can tilt from 0 to 90 degrees for horizontal and vertical sanding to meet your project, and the driven drum allows for sanding curved work-pieces, it has a quick sanding belt replace....
Check Stock

BUCKTOOL 5.0A Belt Disc Sander 4 in x 36 in Belt and 6 in Disc Sander with 3/4HP Direct-drive Motor and Portable Al Base, BD4603 Upgraded Model

  • MAINTENANCE-FREE: This sanding belt and disc were directly driven by the motor shaft, you need not adjust the belt tension, and you don't have to change the damaged belt like before.
  • INCREASE EFFICIENCY: The motor direct drive design is 25% more efficient than the traditional design, it can maximize the development of 3/4 HP fully enclosed induction motor, providing quiet but powerful performance.
  • MULTI-ANGLE SANDING: The belt can tilt from 0 to 90 degrees for horizontal and vertical sanding to meet your project, and the driven drum allows for sanding of curved work-pieces, it has a quick sanding belt replacement design & track control function.
  • TWO CAST AL WORKTABLE: Equipped with two cast aluminum workbenches for more convenient sanding, and the sturdy cast aluminum base with rubber foot prevents vibrations, to ensure a better experience, we suggest matching with our Y-Fitting Hose.
  • TWO-IN-ONE SANDING MACHINE: This sander meets CSA standards, two-in-one sanding machine includes both a 4 x 36-inch belt and a 6-inch disc, the angle adjustable work table with miter gauge can be used on both sanding disc and belt.
Check Stock

307 Pieces Drum Sander Set GOCHANGE Sanding Drum Kit - 300 Pieces Sanding Band Sleeves (80#/120#/240#) + 6 Pieces Drum Mandrels for Dremel Rotary Tool (2.35mm/3.17mm)+ 1 Combination Wrench

  • ✔MULTI-FUNCTION: 300 Grit Commonest And Standard Size Sanding Bands Use For Smoothing Surface And Curved Edges. Widely Used On Smooth Surfaces And Curved Edges, Polished Soft And Hard Materials Such As Home Improvement, Engraving, Metal, Carpentry, Jade, Art And Other Diy Activities..
  • ✔EASY INSTALLATION: Drum Mandrels With Self-Expanding Rubber Cushion, Making The Sanding Bands Close To The Manderl Firmly And Acheiving Better Finishing.
  • In Case The Sanding Band Fall Apart From The Mandrel While Using, Please Make Sure The Drum Have Been Screwed Tightly And Wear Closely To The Sleeve.
  • ✔PRECISION TIGHT, NON-SLIP FIT: Our self-expanding rubber cushioned drum mandrels were especially designed to embrace the sanding bands with a snug fit, keeping the sandpaper sleeves in place, for extra fine artwork. Designed to expand once the nut on the top of the drum is tightened. Easily slide bands over drum & tighten screw for non-slip fit. Our drums should fits most other sanding bands if the sizes are compatible..
  • ✔REUSABLE: Our Drum Mandrels Were Produced With Heavy Duty Rubber For a Long Lasting Endurance. The Shanks Was Ideally Constructed With a Solid High Quality Metal That Will Easily Chuck Into Any Drill Bit And Stay Put. May Always Reuse Acco....
Check Stock

4' Star Molding Flap Sander 1/4' Shank Ideal Tools For Sanding Very Contoured or Profiled Wood or Metal Parts. Woodworking, Finishing, Furniture Restoration and General Home Use (180 Grit Star)

  • Eliminate tedious hand sanding on wood moldings, curved pieces & textured surfaces. Sanding Stars are the ideal tools for sanding very contoured or profiled wood or metal parts. The Sanding Stars are made from a very flexible cloth-backed material making them perfect for finish sanding. Sand contoured and flat surfaces, raised panels, moldings, turnings or carvings with these industrial abrasive sanding stars..
  • Deburring raised grain is possible without destroying the intricate features of a work piece. The aluminum oxide star is 4" in diameter with a 1/4" shank. Rated at 3,200 RPM MAXIMUM.
  • 4" diameter coated aluminum oxide stars with 1/4" shank makes the stars perfect for hand power drill use or it can be used on a drill press.
  • Made from a very flexible cloth-backed material making them perfect for finish sanding..
  • Perfect for woodworkers, furniture restoration, automotive, home and a whole lot more!. MADE in the USA!.
Check Stock