Reviews Current Sensing Resistors

SURLED Dimmer Switch 12 Volt DC for LED RV Lights Interior Dimmer Knob waterproof IP65 Suitable for Camper Recreational Vehicle Boat Auto Truck Marine and Strip Lighting

  • 【Full Range Dimming Capability】ON/OFF + 12 volt DC dimmer 5%-100% smoothing dimming, easily adjust the light soft and stable, no flickering. Note:....
  • 【Flexible Usage】12v led dimmer: Input voltage: DC12-24V.
  • 【Long Lasting】With high-quality aluminum housing, this 12v led DC dimmer provides excellent anti-corrosion and heat-dissipation capacity and....
  • 【Wide Application】Suitable for LED RV Lights Interior, trailers, boats, cars, trucks, or anywhere 12 volt DC power is present, fits in small....
  • 【Protect Your Lights】: Built-in resistors, no extra resistors needed, to avoid the current loop to protect your device. Has over-current....
Check Stock

INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max

  • 【Mini Split Base Current Transformer】It's the smallest one compared to the similar products (output 100MA).Current Transformer, 100A 100mA AC Current Sensor, Split Core Amp Transformer Sensing Relay, Mini Clip-on Easy to Install CT Without Power Off. current sensor structure sensor.
  • 【Professional Use】Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied.plit Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, Useful for Measuring Whole Building Electricity Consumption.current sensing relay isolation.
  • 【Good Mechanical Properties】Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • 【Snap Joint Structure】The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • 【Easy to use】When you fix the energy meter, you don't need to cut off the power if you use this product. Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter.ac transformer amp meter amp tester.
Check Stock

DAOKI 5 pcs 5A Current Transformer ZMCT103C AC Sensor Single Phase Current Transformer Module Current Sensor AC Active Output Onboard Precision with Dupont Line for Arduino

  • 【Features】：5A range single-phase AC mutual inductance module The inductance module is equipped with ZMCT103C series high-precision current transformers and high-precision sampling resistors to facilitate the collection of AC current within 5A.
  • 【Convenience】：Sampling resistance of AC current transformer onload sampling resistance to facilitate the signal collection of AC current..
  • 【Analog current output】：the module can measure the AC current within 5A, and corredsponding output is 5A/5mA.
  • 【Small size】：Current transformer of AC current mutual module with precise miniature current transformer.
  • 【Original】：Our electronic components are 100% original manufacturing, please rest assured to buy our products.
Check Stock

AUKENIEN 1W Resistor 1% Metal Film Fixed Electrical Resistors Assortment Kit 35 Values 1 Watt Resistor Assorted 1 2 2.2 3 3.3 4.7 10 100 120 150 1K 4.7K 10K 20K 33K 47K 100K 220K 470K 1M Ohm

  • AUKENIEN high-accuracy 1w ±1% metal film resistor assortment kit..
  • Resistor Features: High quality 1w resistors possess good noise characteristics and long-term stability. Resistor kit with complete RoHS compliant are pretty popular among the electronic technicians and lovers ..
  • Works with Most Electronic Applications: 1w resistors with ±1% Tolerance can be used to reduce current flow, adjust signal levels, divide voltages in arduino, electronic DIY projects and electrical experiments..
  • Useful 35 Values Resistors: 1Ω 2Ω 2.2Ω 3Ω 3.3Ω 4.7Ω 10Ω 22Ω 33Ω 47Ω 100Ω 120Ω 150Ω 200Ω 220Ω 270Ω 330Ω 470Ω 510Ω 560Ω 1KΩ 1.5KΩ 2KΩ 2.2KΩ 3.3KΩ 4.7KΩ 5.6KΩ 10KΩ 20KΩ 33KΩ 47KΩ 100KΩ 220KΩ 470KΩ 1MΩ..
  • What You Get: 1w(1watt) metal film resistor assortment kit and friendly customer service..
Check Stock

HiLetgo 2pcs MCP2515 CAN Bus Module TJA1050 Receiver SPI Module for Arduino AVR

  • Supports CAN V2.0B specification, the communication speed 1Mb/s..
  • 5V DC power supply module, SPI interface protocol control..
  • Working current: 5mA (1 microamp standby current. Except the power indicator)..
  • 0 to 8-byte data field. With standard frame, expand the frame and remote frame..
  • 120 ohm termination resistors. With impedance matching, ensures the drive capacity, long-distance data transmission against signal radiation..
Check Stock

5PCS USB-C PD QC 5V 9V 12V 15V 20V DC Fixed Voltage Power Trigger Module 5A Type-C Male Input (Default 12V), White

  • This module can output 5V 9V 12V 15V 20V, please refer to the second and third pictures for modification, the required resistors have been placed in the package..
  • Support PD QC protocol .Maximum output current 5A, maximum output power 100W.
  • Note Before purchasing, please confirm whether your power supply supports the voltage value you want.
  • Not all USB-C power supplies can support all voltages , If the power supply does not support the requested voltage, the next lowest voltage will be provided.
  • Package : 5 PCS 9V Power Trigger Module. 5 PCS White Housing ,The resistance value of each 10 PCS is 1K, 5.1K, 24K, 51K packaged as 0603 resistors.
Check Stock

Smraza Electronics Component Fun Kit with Power Supply Module, Jumper Wire,Precision Potentiometer,830 tie-Points Breadboard Compatible with STM32,Raspberry Pi,Arduino

  • Highest Cost Effective electronic Components Funny Kit: More than 450pcs Sensors,Capacitors,Resistors and Funny Components for simple electronic projects!Easier and happier to learn STEM for children and adults..
  • Two ways to Power:The power supply module can be powered by USB or 6.5V-9V DC adapter, Output voltage: 3.3V, 5V. Maximum output current: 003c700mA.
  • Individual Convenience Pakcage: The components are all well-stored in a sturdy box, Resistors/LED/Transistors and Integrated Circuits all individually packaged and labeled..
  • Tutorials and Components datasheet are available to download from our netdisk, if you have any issus, please be free to contact our customer service..
Check Stock

Current Switch, Self-Powered Current Sensing Switch SZC25-NO-AL-CH AC 0.5-50A Adjustable Normally Open Current Sensing Relay for Flash Buzzer Transformer Substation

  • ...CISION & STABLE PERFORMANCE】The product features high quality, high precision, stable performance and long service life. It has the advantages of high precision, more stable heart, and long service life. It is an ideal choice for automated industrial equipment and store monitoring..
  • 【WORKING PRINCIPLES】This AC current sensing switch is designed and manufactured to solve the AC current monitoring. It uses the principle of mutual inductance to sense the AC current through the AC, isolate the AC current, and output a normally closed switching signal to directly control various automated chemical equipment..
  • 【FAST RESPONSE & LED INDICATOR】The switch has no new limit, and the reaction speed reaches ms. The LED state indicator provides a convenient and intuitive representation of the operating status of the switch. Through-heart structure design, isolation withstand voltage up to 2000V..
  • 【SELF-POWERED SENSING SWITCH】Self-powered, no external power supply required, high-power MOS tube non-contact electronic switch. The operating current of 0.5-50A AC can be adjusted by the potentiometer..
  • 【WIDE APPLICATION】Widely used in substation, frequency conversion speed control device, inverter device, electrolytic plating, electric locomotive, street la....
Check Stock

Replacement UV Tube; 4 watts, 365 nm

  • 【Advantage】High precision LED digital display, intuitive. Light weight and mini size.Easy to operate..
  • 【Constant】Constant Voltage (CV ) & Constant Current (CC ) Function. Suitable for various occasions which need to use DC Power Supply..
  • 【Advanced & Protection Functions】Advanced technology, effectively reducing the weight of the power, power moves. Suitable for general or lab use. Overcurrent protection (OCP), over temperature protection (OTP), over power protection (OPP)..
  • 【Thermal Effect & Low Noise】8cm smart fan, thermal effect, effectively extending fan life, reducing noise.Plastic panels, more beautiful, coarse harmonic voltage and current settings finetuning knob, set more precise..
  • 【Wide Application】Battery charging. Car DVD, car audio. Aging products, such as resistors, capacitors, relays, motor, LED, and so on. Laboratory, factory, repair power supplies.All other where DC power supply is required..
Check Stock

JTD873GYR 3PCS Model Railroad Train Signals 3-Lights Block Signal HO Scale 12V Green-Yellow-Red Traffic Lights for Train Layout New

  • 100% Brand new and high quality.Perfect for Railway & Building Layout!Great accessories for diorama, buildings, train models..
  • Prewired quality products.Lights include red, green and yellow leds.Each line corresponds to the color of the glowing colors, the green line is the green LED, the red line is the red LED, the yellow line is the yellow LED.black wire with positive, and the other three with negative..
  • You must connect a resistor in series before you will use them on 12V or 16V, I will supply compatible resistors for free..
  • Reference Scale: 1:87,Suitable for HO scale.Operating Voltage: 12V, AC or DC Compatible.Operating Current: 20mA.Material: Plastic.
  • Package included: 3 complete lamps,including 3 Resistors for 9~18V operation..
Check Stock