Reviews Curing Agent Accelerator

Insta Cure #1 (Prague Powder 1) - Curing Salt for Meat and Sausage - 1 lb. - The Sausage Maker

  • Insta Cure #1 is a simple, easy to use curing agent for meats that require cooking, brining (wet curing), smoking, or canning. This includes jerky, ham, bacon, brisket, sausage, snack sticks, corned beef, pâtés, pastrami, luncheon meats, meat loaves, poultry, fish and more.
  • Curing meat helps to prevent common food borne illnesses associated with trapped air in meat mixture. For use on low & slow smoked/cooked meats with a short curing window.
  • Contains 1 lb. of Insta Cure #1, enough to process approximately 480 lbs. of meat.
  • The Sausage Maker recommends using 1 level teaspoon per 5 lbs. of ground meat. Recipes may call generic names such as “curing salt".
  • Insta Cure is a Trademark of The Sausage Maker Inc. Made in USA.
Check Stock

Insta Cure #1 (Prague Powder 1) - Curing Salt for Meat and Sausage - 8 oz. - The Sausage Maker

  • Insta Cure #1 is a simple, easy to use curing agent for meats that require cooking, brining (wet curing), smoking, or canning. This includes jerky, ham, bacon, brisket, sausage, snack sticks, corned beef, pâtés, pastrami, luncheon meats, meat loaves, poultry, fish and more.
  • Curing meat helps to prevent common food borne illnesses associated with trapped air in meat mixture. For use on low & slow smoked/cooked meats with a short curing window.
  • Packet Contains 8 oz. of Insta Cure #1, enough to process approximately 240 lbs. of meat.
  • The Sausage Maker recommends using 1 level teaspoon per 5 lbs. of ground meat. Recipes may call generic names such as “curing salt".
  • Insta Cure is a Trademark of The Sausage Maker Inc. Made in USA.
Check Stock

Hoosier Hill Farm Prague Powder No.1 Pink Curing Salt, 2.5 Pound

  • Prague Powder #1 can be used in the preserving and curing of: Semi-dry and cooked meats, Sausage, Fish, Jerky, Bacon, Ham, Pastrami, Hard Salami, Corned Beef..
  • Contains 2.5 lbs of Prague Powder No.1 Pink Curing Salt, also referred to as Tinted Cure or Pink Curing Salt. A critical component in the meat curing and sausage making process, enough to cure 1000 lbs of meat..
  • Hoosier Hill Farm is located in America’s heartland of northeast Indiana. Our products and ingredients are guaranteed fresh and we are proud of our heritage and good, old-fashioned values!.
  • Use 1 oz. of cure for 25 lbs. of meat or 1 level teaspoon of cure for 5 lbs. of meat or fish. Mix cure with cold water. Too much or too little Pink Curing Salt can adversely affect health, taste, and food quality..
  • To cure correctly and within food safely guidelines, it is extremely important to use the proper amount of Prague Powder #1. As a curing agent, Prague Powder #1 serves to inhibit bacteria growth and helps to maintain meat flavor and appearance..
Check Stock

Colloidal Silica Rigidizer - Coating for Refractory Ceramic Fiber Products - 1 Quart

  • rigidizer can be used as the cohesive agent for various fireproof materials, widely used in industrial furnace thermal technology equipment, and has....
  • high temperature stability, Withstand Temperature up to 2300 F.
  • Applied by spraying, rolling, dipping, or brushing, Normal Curing Time 24 Hours (Post Application).
  • Rigidizer can be used in paper-making industry . It can be used as the anti-glutinous agent of cellophane, pre-treatment agent of photographic paper,....
  • High Velocity Resistance, Reduces Hot Gas Erosion or Flame Impingement., Reduces Airborne Particles.
Check Stock

Hot Stuff Instant Glue Pro Kit Includes CA Glues Accelerator Debonder Extra Spouts HK-1

  • [Hot Stuff Original] Thin CA Glue with a viscosity (3cps) similar to water and no surface tension. Have the parts that fit exactly together, get them....
  • [Super T MEDIUM] Gap-Filling CA Glue has a viscosity (200-300 cps) similar to syrup. This super glue is perfect for gluing somewhat porous materials....
  • [Special T THICK] Ultra Gap-Filling CA Glue has a viscosity (1150-1500) similar to honey. Works great when you use it to bond both porous and....
  • [NCF Quick Accelerator] is the best accelerator you will find anywhere. All of our accelerators dramatically decrease the curing time of the glue and....
  • [US-1 Super Solvent] is the very best product to debond and dissolve CA Glues from our kit, and it will also remove super glue made by other....
Check Stock

Adhesive Guru CA Glue with Activator Woodworking (0.9 oz - 3.38 fl oz) Ca Glue for Woodworking, Cyanoacrylate Glue and Activator

  • ... project bonding times significantly when compared to a conventional adhesive. Rapid, fast, flash setting formulation that bonds most surfaces within 5-10 seconds. 2-3 drops of CA glue can cover a square inch of the surface that you glue together. After cleaning both surfaces, apply glue to one side of the item and accelerator spray to the other. Press them together, align quickly, and your done..
  • Rapid Curing Time - Thanks to our specially formulated Ca Glue with Activator woodworking and for all surfaces, achieve a cure in as little as 3 seconds. No nails or fastening devices are necessary. No more waiting, clamping or taping. Its outstanding instant grab adhesion properties, powerful bond strength and quick curing time outperforms conventional glues making it the handy, easy to use spray that sticks in mere seconds..
  • Suitable Professional Use - Adhesive Guru meets the highest industrial standards. Our CA glue and accelerator is extremely durable once cured, making it great for industrial-strength projects. Ideal CA glue for woodworking, DIY Repairs , Hardware, Molding & Trim , Kitchen Cabinet , Electrical, Plumbing, Carpentry and more. It is also a popular product for simple household tasks, hobbies, and crafts..
  • Clean application - With this wide va....
Check Stock

Adhesive Guru CA Glue with Activator Woodworking (1.7 oz – 6.76 fl oz) Ca Glue for Woodworking, Cyanoacrylate Glue and Activator

  • ... project bonding times significantly when compared to a conventional adhesive. Rapid, fast, flash setting formulation that bonds most surfaces within 5-10 seconds. 2-3 drops of CA glue can cover a square inch of the surface that you glue together. After cleaning both surfaces, apply glue to one side of the item and accelerator spray to the other. Press them together, align quickly, and your done..
  • Rapid Curing Time – Thanks to our specially formulated Ca Glue with Activator woodworking and for all surfaces, achieve a cure in as little as 3 seconds. No nails or fastening devices are necessary. No more waiting, clamping or taping. Its outstanding instant grab adhesion properties, powerful bond strength and quick curing time outperforms conventional glues making it the handy, easy to use spray that sticks in mere seconds..
  • Suitable Professional Use – Adhesive Guru meets the highest industrial standards. Our CA glue and accelerator is extremely durable once cured, making it great for industrial-strength projects. Ideal CA glue for woodworking, DIY Repairs , Hardware, Molding & Trim , Kitchen Cabinet , Electrical, Plumbing, Carpentry and more. It is also a popular product for simple household tasks, hobbies, and crafts..
Check Stock

Adhesive Guru CA Glue with Activator Woodworking (4 x 3.5 oz – 4 x 13.5 fl oz) Ca Glue for Woodworking, Cyanoacrylate Glue and Activator (4 Pack)

  • ... project bonding times significantly when compared to a conventional adhesive. Rapid, fast, flash setting formulation that bonds most surfaces within 5-10 seconds. 2-3 drops of CA glue can cover a square inch of the surface that you glue together. After cleaning both surfaces, apply glue to one side of the item and accelerator spray to the other. Press them together, align quickly, and your done..
  • Rapid Curing Time – Thanks to our specially formulated Ca Glue with Activator woodworking and for all surfaces, achieve a cure in as little as 3 seconds. No nails or fastening devices are necessary. No more waiting, clamping or taping. Its outstanding instant grab adhesion properties, powerful bond strength and quick curing time outperforms conventional glues making it the handy, easy to use spray that sticks in mere seconds..
  • Suitable Professional Use – Adhesive Guru meets the highest industrial standards. Our CA glue and accelerator is extremely durable once cured, making it great for industrial-strength projects. Ideal CA glue for woodworking, DIY Repairs , Hardware, Molding & Trim , Kitchen Cabinet , Electrical, Plumbing, Carpentry and more. It is also a popular product for simple household tasks, hobbies, and crafts..
Check Stock

REALINN Epoxy Tile Grout Bright Porcelain White 400 ml, Dual Tube Waterproof Stain-Proof Colorant Resin Sealer, Restore and Spruce Up Tile Grout Line for Bathroom Kitchen Wall Floor

  • Epoxy Grout, made of epoxy resins combined with curing agent, pigment. Advanced double tube design, easy to apply, no mixer pre-mix, just one double tube epoxy gun to finish the job. (NOTE: Caulking gun and tools are not included. ).
  • Color: Bright Porcelain White. Even color, long lasting and no discoloration. Non-hazardous, no unpleasant odor..
  • Strong and durable, with greater bond strength and greater flexibility. Heat and cold resistant, no cracking, shrinkage or discoloration..
  • Waterproof and stain-proof, widely used in tile showers and kitchens, floors and walls, splashback tiling over vanities and countertop, surfaces underneath sinks or basins, swimming pools, could use both indoor and outdoor. Ideal replacement for regular grout and sealant caulk..
  • Kit includes: Double tube epoxy grout (200g for tube A + 200g for tube B) + 3 static mixing nozzle. Tips: When using the first time, please squeeze out grout about 30 cm and discard. Prevent failure to dry and poor adhesion due to uneven mixing of pigment and curing agent..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against mold hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock