Reviews Cts Poly Pipe
[10-Pack] PROCURU 1/2-Inch (5/8\ OD) CTS Escutcheon Wall Cover, Chrome-Plated Steel with SureGrip, for 1/2\ Copper Pipe and 1/2\ PEX Tubing
- For 1/2" CTS Nominal Copper Pipe (5/8" OD).
- For concealing gaps around water supply pipe.
- SureGrip fingers allow small adjustements to pipe for snug fit.
Check StockiCrimp ICP-PC01 PEX Cinch Clamp Removal Tool for Removing 3/8-in, 1/2-in, 3/4-in, 1-in ASTM F2098 Stainless Steel Pinch Clamps and up to 13mm Wide Ear Clamps, Hand Clamp Cutter
- ANTI RUST - Compared with metal pipe clips clamps, plastic pipe clips will not rust and are very light.
- MATERIAL - Made of PVC material, with tight structure and high strength, which can fix and protect pipelines well, ensure long service life.
- SIZE - Height (without pipe installed) 3/4". Best for 1/2" CTS (5/8" OD) tubing size.
- USABILITY - Mainly used for the installation of plumbing pipe, cable pipe, gas pipe, water pipe and other pipe fittings fixed on the ground or wall.
- NOA STORES 100% SATISFACTION GUARANTEE – Our first priority is your SATISFACTION. If you have any problem, just leave a message and we will find the best solution that will make you 100% happy.
Check StockWELWIK 4PCS Chrome Plated Stainless Steel Tapered Flange Cover Deep Bath Flange Made to Match Bell Flange, 1/2 in
- The keyhole flange cover is made of stainless steel, which is heat-resistant and resistant to a variety of chemicals..
- When the pipe passes through the wall, it will leave an ugly surface.
- Conical pipe cover can be decorated with pipe cover or cover the gap to keep the appearance clean..
- The size of flange cover is about 17 x 32 x 56 mm / 0.66 x 1.25x 2.2 inches, which is suitable for 1 / 2 inch CTS nominal copper pipe (5 / 8 inch outer diameter).
- The hole cover flange cover is compatible with all 1 / 2'' nominal water pipes, such as copper, PEX and CPVC..
- Can be used in various residential and commercial applications, and can be installed with kitchen faucet, sink, toilet, dishwasher, refrigerator and other water supply devices..
Check StockSharkBite 3/4-Inch Tee, Push-to-Connect, PEX, Copper, CPVC
- INSTALLS IN SECONDS: 3/4-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
- VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
- COMPATABILITY: Same as part numbers U370LFZ and U370LF.
- QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
- SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check StockSharkBite 1/2 Inch Disconnect Tongs for Push to Connect Brass Plumbing Fittings, U711
- SHARKBITE REMOVAL TOOL: 1/2 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily.
- can remove or adjust push to connect fittings in tight spaces for easy disassembly.
- COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
- DURABLE AND HIGH QUALITY: Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust.
- SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check StockSharkBite 1/2-Inch Tee, 1/2 Inch, Push-to-Connect, PEX, Copper, CPVC
- INSTALLS IN SECONDS: 1/2-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
- VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
- COMPATABILITY: Same as part numbers U362LFZ and U362LF.
- QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
- SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check StockSharkBite 1/2 Inch Disconnect Clip for Push to Connect Brass Plumbing Fittings, U710A
- SHARKBITE DISCONNECT CLIP: 1/2 inch disconnect clips allow for universal brass push connect fittings to be disconnected from the pipe quickly and easily.
- can remove or adjust push to connect fittings with no tools, crimping, glue or soldering required.
- COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect clip is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
- DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
- SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)
- 【Lead Free Material】PPSU is a durable plastic poly material, lead free and non-toxic. So PPSU is more eco-friendly than brass. These pex expansion fittings meet the standard of potable water grade. When the water flows through the poly pex fittings, it will not be polluted..
- 【Fully Equipped】Qty: 1/2 inch pex expansion elbows 10pcs + 1/2 inch pex expansion Tees 10pcs + 1/2 inch pex expansion couplings 10pcs + 1/2 inch pex expansion rings 70pcs | Connection pipe type: Pex A pipe only | Max temperature: 200F | Max operating pressure: 160psi.
- 【Professional Standards】Pex Expansion A Fittings are of high quality. All poly pex a fittings are manufactured according to ASTM F-1960, CSA B137.5 and qualified cUPC certification. Listed to NSF NSF/ANSI 61..
- 【Easy to Install】Use expansion tools and expansion rings to connect the expansion fittings to the PEX A pipe. The protruding stop part on the expansion pex fitting makes it clear whether it has been installed in place. NOTE: Expansion tool is not included in the package..
- 【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemica....
Check StockSharkBite UC120LFA10 1/2
- INSTALLS IN SECONDS: No soldering or glue.
- VERSATILE: SharkBite plumbing fittings fit copper, CPVC, CTS, and PEX pipe and connect all 4 types in any combination.
- LEAD-FREE: Made of high-quality forged DZR brass that is lead-free.
- HIGH QUALITY: SharkBite's quality and performance is field-proven with more than 550 million connections.
- SharkBite is the only push-to-connect brand that can ensure clean, leak-free connections.
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check StockSharkBite 1/2-Inch Straight Coupling, Push-to-Connect, PEX, Copper, CPVC
- INSTALLS IN SECONDS: 1/2-inch straight coupling requires no soldering, crimping, or glue–just push to create a watertight seal.
- VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
- COMPATABILITY: Same as part numbers U008LF and U008LFZ.
- QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
- SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock