Reviews Crosscut Line

SawStop TSA-SA48 Sliding Crosscut Table Attachment

  • This sliding table is built for versatility. Micro-adjust for detail cuts, and crosscut full sheets with the 55" travel and 48" crosscut capacity..
  • The fence is at least 15% larger than typical crosscut sliders, spanning 43" and extending past 58"..
  • Large flip-stops with scale and magnified lenses help ensure accurate, repeatable cuts every time..
Check Stock

Kreg KMA4700-E Straight Edge Guide XL-8 Ft

  • Crosscut and rip cut material up to 8 feet (244cm).
  • Aluminum guide rail leads cuts precisely along a straight line.
  • Cutline indicators help position cuts perfectly.
Check Stock

Kreg KMA4100 Crosscut Station

  • Crosscut up to 12" wide (305mm) and make a variety of miter cuts from 0° to 45°.
  • MDF base and backboard act as sacrificial surface for splinter-free cutting.
  • A kerf line you cut into the MDF base shows exactly where your saw will cut.
Check Stock

Kreg Straight Edge Guide-4 Ft

  • Crosscut and rip cut up to 4 feet (122cm) in sheet goods.
  • Aluminum guide rail leads cuts precisely along a straight line.
  • Cutline indicators help position cuts perfectly.
  • Built-in clamping with GripMaxx secures rail to material.
  • Works with left- and right-blade circular saws, as well as some jigsaws and trim routers.
Check Stock

Kobalt 3 in 1 folding saw

  • ideal capacity for moulding and framing cuts.
  • Light weight due to compact die-cast aluminum construction-easy to move from storage to jobsite.
  • Vertically mounted laser guide projects accurate pre-cutting line for precise alignment.
  • Positive miter and bevel stops for accurate placement of most used angles.
  • Dual slide rail system with linear bearings allows for smooth and accurate operation.
Check Stock

TonGass DIY Crosscut Sled Kit for Table Saw - 2*UHMW Runner Bars 2* Aluminum Tracks 1* Knob & Bolt Set 8* Flat Heat Screws

  • Safety is our priority - This DIY table saw crosscut sled hardware kit will make crosscutting safer and more convenient. Avoid risking your limb when....
  • 13 PIECES CROSSCUT SLED HARDWARE - includes 2 pieces of 19” x 3/4” x 3/8” UHMW runner bars, 2 pieces of 12 inches aluminum mini tracks, 1 set....
  • PRE-CUT AND COMPLETE SET FOR YOUR CONVENIENCE - All the components of this kit are cut and designed specifically for the building of a crosscut sled.....
  • Please take note: The UHMW runners included in this kit will only fit standard 3/4-inch and 3/8-inch track slots and will not fit the Ryobi table saw....
  • FREE HOW TO BUILD A CROSSCUT SLED GUIDE BOOKLET - Follow to a tee or use as a guide, our easy-to-understand guide is perfect for all skill levels.....
Check Stock

Kobalt 7-1/4-in Sliding Compound Miter Saw

  • ideal capacity for moulding and framing cuts.
  • Light weight due to compact die-cast aluminum construction-easy to move from storage to jobsite.
  • Vertically mounted laser guide projects accurate pre-cutting line for precise alignment.
  • Positive miter and bevel stops for accurate placement of most used angles.
  • Dual slide rail system with linear bearings allows for smooth and accurate operation.
Check Stock

Velodi 2 PCS 6302-2RS Replacement Ball Bearing for DeWalt DW708 DW716 DW717 DW718 DWS780 Miter Saw# N127530

  • Compatible with: DeWALT: DW706 Type 1 12 Dual Bevel Miter Saw, DW708 Type 1 Crosscut Miter Saw, DW708 Type 3 Crosscut Miter Saw, DW708 Type 4 Crosscut....
  • Pre-Lubricated and Stable Performance and Cost Effective, Deep Groove Ball Bearings..
  • Double Seal Effectively Saves Grease and Prevent Impurities From Entering..
Check Stock

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4″ x 3/8″).

  • Kit contains: Our crosscut sled kits come in red- 3/4″x3/8″x36″ 2 pcs.
  • white- 3/4″x3/8″x19″ plus 1 foot primary color T-track, 2 pcs.
  • white- 3/4″x3/8″x48″ 2 pcs. Make your crosscut sled any size for your table saw and cutting requirements..
  • High Quality Material: UHMW is a linear polyethylene with a molecular weight of 3,000,000 to 6,000,000. Thus, it is ten times heavier than regular high density polyethylene, and extremely durable for extensive use..
  • Smooth & No Residue: UHMW bars produce less friction than wood, perfect for runners for crosscut sleds. Furthermore, UHMW doesn’t expand or contract like wood during extreme weather changes. Each bar measures 3/4″ x 3/8″, fitting most standard table saw slots. Unlike wooden bars, UHMW bars are slick, leaving no residue, dust, or shavings behind..
  • Outstanding Impact Strength: With outstanding impact strength even at low temperatures, our crosscut sled kits are ideal for jigs, fixtures, or 3/4″ x 3/8″ miter grooves on table saws, bandsaws, or router tables..
  • Please note: UHMW poles tend to bend during shipping but are easily adjusted..
Check Stock

BOSCH GCM18V-12SDN PROFACTOR 18V Surgeon 12 In. Dual-Bevel Slide Miter Saw (Bare Tool)

  • SURGEON PROFACTOR PERFORMANCE: For a truly mobile jobsite solution, this saw provides light weight and pro capacity.
  • LARGE CUTTING CAPACITY: Features a cut capacity of 3.5 In. depth and a 14 In. width/crosscut.
  • SHADOW LED CUTLINE: Provides an accurate guide to quickly line up precise cuts without the need for a tool to adjust.
  • DUAL-BEVEL DESIGN: Allows for large compound cuts to either side of the workpiece.
  • BEVEL DETENTS: Features an easy-to-read scale with detents at common angles.
Check Stock