Reviews Crkt Ignitor

767A-378 White Rodgers Furnace Hot Surface Ignitor for Norton 601 601TB 20165702

  • 767A-378 Furnace Hot Surface Ignitor White Compatible with Norton 601 601TB 20165702.
  • Includes (1) Furnace Hot Surface Ignitor as pictured.
  • Part number # 767A-378. This igniter Compatible with Robertshaw # 41-602 Norton # 601, 601TB & OE # 20165702..
  • This Ignitor has a 2-1/4" long from bracket to end of ignitor. 5" Wire Leads with Plug, wire nuts included. 120V..
Check Stock

Round Gas Range Oven Ignitor for GE 41-208 ER4342528 SGR401 SGR400

  • Gas Igniter for Stove Range, Replacement Part No. SGR403.
  • SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
  • Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
  • ignitors are fragile and will break easily..
  • Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignito....
Check Stock

Gas Oven Bake & Broil Round Igniter for WB2X9154 4342528 Ignitor AP2014008, PS243425

  • Gas Igniter for Stove Range, Replacement Part No. SGR403.
  • SPECS:This igniter’s amperage range is 2.5 – 3.0. Used with 2.8 to 3.0 amp rated gas safety valves.The ignitor measures 3-1/2 long,one lead has a 1/4 female terminal the other is bare. 2 ceramic wire nuts included,This is a direct replacement for GE number WB2X9154, WB13K3, WB13K4,Fits many different range manufactured including Whirlpool, Kenmore, Roper..
  • Includes: high temperature stainless steel shield, high temperature MGT wire leads, and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor.
  • ignitors are fragile and will break easily..
  • Description:The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignito....
Check Stock

HID Headlight Xenon Ballast Ignitor - Replaces 33129-S0K-A01 33129-SCC-003 33129-SEA-003 W3T10571 - Compatible with Acura Honda & Mazda Vehicles - MDX TL TSX RDX Odyssey S2000 3 CX-9

  • Replacement HID OR Xenon Ballast Ignitor - is responsible for supplying power to your headlight's bulb. Overtime your HID Ballast Inverter can fail....
  • Compatible Replacement for Acura, Honda & Mazda Vehicles - 2013 - 2015 ILX | 2012 - 2013 MDX | 2007 - 2015 RDX | 2004 - 2005, 2012 - 2014 TL | 2004 -....
  • Replaces Part# 33129-S0K-A01, 33129-SCC-003, 33129-SEA-003, W3T10571 - Each of your vehicle’s headlights has its own ballast ignitor. These ballasts....
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part. This AA Ignition HID Xenon Ballast Ignitor is a direct replacement for the ballast....
  • Lifetime Warranty - This HID Xenon Ballast Ignitor comes complete with a lifetime warranty. If the ballast ignitor ever fails simply contact us for a....
Check Stock

PP200 PP200SC HA1000 Reddy Desa Ignitor Kerosene Heater by Ministry of Warehouse

  • ASKFD PP200SC Ignitor Heavy Duty Replacement for PP200 Ignitor HA1000 Ignitor 102548.
Check Stock

VI4 2 PAK Gas Oven Range Ignitor for PB040001 Viking

  • Gas Range Oven Replacement Viking Ignitor AR04001..
  • The White Ceramic part of the ignitor measures 2-1/4" Long..
  • if you have any questions about the product and its models. contact us and we will help you.
Check Stock

(NEW Part) Gas Range Oven Ignitor for Viking Range replacement for PB040001 AR04001

  • Set of Gas Range Oven Ignitor part number AR04001..
  • with the purchase of quantity 1 of this listing you will receive quantity 1 ignitors..
  • These are a replacement Viking Ignitor, part number PB040001..
  • This is a Flat Ceramic Bar with a Round Style Ignitor..
Check Stock

Hunting Knife Sheath Kinematic Provoke Boltaron Sheath

  • Gear Compatible: Durable Boltaron sheath with mounting options.
  • Gear Compatible: Clip set provides multiple carry options.
  • CRKT accessories have a one-year limited warranty against defects in material or manufacturing, see company site for details.
Check Stock

CRKT Berserker Axe Full Grained Leather Sheath D2736

  • High Quality: Durable full grained leather sheath.
  • Expert Crafted: Featuring hand oiled finish for durability.
  • CRKT accessories have a one-year limited warranty against defects in material or manufacturing, see company site for details.
Check Stock

CRKT Freya Axe Full Grained Leather Sheath D2749

  • High Quality: Durable, full grained leather sheath.
  • Expert Crafted: Featuring hand oiled finish for durability.
  • CRKT accessories have a one-year limited warranty against defects in material or manufacturing, see company site for details.
Check Stock