Reviews Crimp Before Welding

Sunex SX280 5mm Punch Flange Tool

  • Great for punching clean and accurate welding fasteners.
  • Easily crimp flanges or lap joint sheets and pipes.
  • Cuts sheet metal fabrication time in half.
Check Stock

TEMCo TH0006 Hydraulic Electrical Cable Lug/Terminal Crimper Kit with 18 Die Sets 12 AWG - 00 (2/0) (5 US TON)

  • New for 2020, TH0006 Version 2.0. Released September 1st 2020, all units now include the following improved features:.
  • TRUE-HEX Crimp Forming dies apply uniform pressure on all sides for even compression and high pull out resistance..
  • 9 Standard size dies for American Wire Gauge 12 through 2/0 (00). Dies conform to DIN industrial standards and are compatible with all US domestic market terminals, including color coded lugs. Dies imprint the size into the crimped terminal for code compliance inspections..
  • 9 additional plus size dies cover the hard-to-fit non standard lugs like heavy cast or thin-wall terminals. All 32 dies are black oxide coated, Won’t chip or flake like chrome plated versions..
  • Capable of crimping all battery and welding cable, building wiring, crimp terminal lugs (including heavy cast lugs) combined with a 5 Year Warranty from a well-known American name..
Check Stock

Senmit 10 Ton Hydraulic Cable Crimper Hand Tool for 1/8, 3/16 Stainless Steel Cable Railing Fittings, Heavy Duty Head, Come with 8 Pairs Dies and Cable Cutter

  • ...rength and good toughness. The Oxide Crimp Head and Dies won't chip or flake. Dies are made of more hardened 40cr steel, this cable crimper is much better than classic chrome-plated models, for an enhanced performance..
  • 【WIDE APPLICATIONS】: Whether for battery and welding cable, building wiring, crimp heavy cast terminal lugs, this premium quality hydraulic cable crimper will do an outstanding job..
  • 【EASY TO USE】: 4 steps to perfect crimping: install the die set that matches your terminal size, rotate the release valve in order to close it, pump the handle until the resistance felt becomes significant and open the release valve by rotating to the left..
Check Stock

Yescom 3/4″ PEX Crimper Copper Ring Plumping Crimps Crimping Tool with Go/no Go Gauge

  • [3/4″ PEX Crimper]: 12″ x 2 15/16″ x 1 6/16″ PEX crimper with Go/No-Go crimp gauge feature 3/4″ jaw size for tightening the connection between 3/4″ copper crimp rings and PEX pipes and eliminating distortion on the rings.
  • widely used in water lines, radiant heat, snow melt, ice rink systems and other applications.
  • [Sturdy Metal Construction]: Strong iron for high strength and durability, can support a long service life.
  • well-polished jaw for ensuring no damage to the crimp rings and fitting tightly for avoiding leaking.
  • [Labor-saving Mechanism]: Smooth leverage mechanism for allowing secure and accurate connection with minimal force required, just simply pull back on the handle to open the crimp jaw and place the crimping end around the crimp ring and press the handle.
  • [Compact & Convenient]: Compact design for using in narrow spaces and light weight for adding portability.
  • plastic handle with comfortable grip for easy holding and minimizing fatigue of long time using.
  • [Go/No Go Gauge]: Go/No-Go crimp gauge tool for calibration, it is a convenient measuring tool to directly check if the crimping is proper or not, helping you to verify adjustments before crimping.
Check Stock

Cable Lug Crimping Tool,Knoweasy Battery Cable Lug Crimper for Heavy Duty Wire Copper Lugs AWG 10,8,6,4,2,1/0

  • ✅【Rotate Crimp Dies:】The Wire Crimper is built in 6 AWG standard dies:6/10/16/25/35/50 mm² ( 10, 7, 5, 6, 2, 1AWG ),Hexagonal rotating dies processed with Wire EDM Cutting,more accurate than normal casting dies.
  • ✅【Durable Tool: 】This battery cable crimper is made of high quality carbon steel ,durable and sturdy to use, suitable for home and electrical crimping work.
  • ✅【Easy Operation: 】Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs.
  • ✅【Comfortable Handles Design:】Long handle of cable crimper results in less efforts when crimping,it saves strength and improves user’s experience.
  • ✅【Application&Compatible:】Widely used in Copper，Aliuminum Cable lug and Non-Welding&Standard Electrical Connection.
  • Compatible with most of connectors from Blackburn,Burndy,ILSCO,Pamduit,T&B,etc..
Check Stock

TEMCo Industrial Hydraulic Cable Lug Crimper TH0005 V2.0 (11 US TON) 10 AWG to 600 MCM Electrical Terminal Cable Wire Tool Kit with 32 Die Sets

  • New for 2020, TH0005 Version 2.0. Released September 1st 2020, all units now include the following improved features:.
  • TRUE-HEX Crimp Forming dies apply uniform pressure on all sides for even compression and high pull out resistance..
  • 16 Standard size dies for American Wire Gauge 10 through 600MCM. Dies conform to DIN industrial standards and are compatible with all US domestic market terminals, including color coded lugs. Dies imprint the size into the crimped terminal for code compliance inspections..
  • 16 additional plus size dies cover the hard-to-fit non standard lugs like heavy cast or thin-wall terminals. All 32 dies are black oxide coated, Won’t chip or flake like chrome plated versions..
  • Capable of crimping all battery and welding cable, building wiring, crimp terminal lugs (including heavy cast lugs) combined with a 5 Year Warranty from a well-known American name..
Check Stock

HKS Battery Cable Crimping Tool for AWG 10-1 Copper Ring Terminals, Heavy Duty Crimper for Wire Lugs

  • 【Lightweight】The use of high-strength aluminum alloy handle, significantly reducing the weight of crimper ,operating more labor-saving. (Approx. 2.35 lbs.).
  • 【Rotatable Crimp Jaw】 Secured by spring-loaded locking pins, available in 6 crimp sizes - 10, 8, 6, 4, 2, 1/0 AWG - (6mm²/10mm²/16mm²/25mm²/35mm²/50mm²)..
  • 【Efficient】The non-slip rubber coated handle of this tool makes working more comfortable and effortless. Press the screw, rotate the crimp to the size you need and simply make a good crimp on the cable lug..
  • 【High Reliability】The jaw is made by EDM wire cutting process for more durability and precision.The crimper body is made of high quality steel die-casting. They are subjected to strict quality inspection process before leaving the factory..
  • 【Package Contents】1 x HX-50B Crimper..
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

Panduit CJ688TGBU Mini-Com TX6 Plus Giga-Channel Cat6 Jack, Blue, Box of 50

  • Manual ratchet crimper for use with conductors from #22 to #10 AWG (0.5 to 6 sq. mm) and matching insulated terminals, splices, and disconnects.
  • Ratchet mechanism for proper crimp force with each operation.
  • Two color-coded crimp pockets for use with a range of wire sizes.
  • Steel frame with black oxide finish for strength, durability, and resistance to corrosion.
  • Manual release lever for opening jaws before full crimp cycle when necessary.
Check Stock

1/2 Inches Pex Crimper Making Copper Crimping Ring Plumbing Crimp Tool Systems w/Gauge Red for Portable Connections Handle

  • This PEX crimp tool is reliable and valuable for reaching into tight connections.
  • The design of this PEX crimper is labor-saving, it features a comfort grip.
  • Simply Pull Back on the Handles to Open the Crimp Jaws.
  • Included calibration gauge makes it easy to verify adjustments before crimping.
  • Ideal for making copper crimp ring connections in potable water lines, radiant heat, snow melt, ice rink systems and among other applications..
Check Stock