Reviews Crankshaft Sensor Pt Cruiser

3/8-Inch Drive Oxygen Sensor Socket Offset Wrench Remover Tool fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool

  • REMOVE OXYGEN SENSORS FROM YOUR VEHICLE: This 10 Piece Specialty Sockets O2 Sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches.
  • Some O2 socket pieces feature cutout sides to prevent damage to wires and tubes.
  • Remove and install parts on most domestic and some international vehicles.
  • USE WITH YOUR TOOLS: Features 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives.
  • For use with ratchet, breaker bar, or hand wrench (driver tools not included).
  • Use this tool in conjunction with the O2 Sensor Thread Chasers to install new sensors easily (thread chaser and sensors not included).
  • BUILT TO LAST: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity.
  • Each 02 sensor socket is coated with a black oxide finish to provide resistance to rust and corrosion.
  • CONTENTS: This specialty tools set includes 10 pieces: 1/2 inch dr x 22mm x 6PT x 110mm, 1/2 inch dr x 29mm x 6PT x 90mm, 1/2 inch dr x 22mm x 12PT x 78mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 28mm x 12PT x 78mm, 1/2 inch dr x 7/8” x 50mm, 3/8 inch dr x 7/8” x 6PT x 80mm, 3/8 inch dr x 7/8” x ....
Check Stock

Delphi SS10875 Crankshaft Position Sensor Grey

  • Single element design provides long-lasting sensor protection.
  • Enhanced sensing functionality helps reduce emissions, improve reliability and drivability.
  • Delphi crankshaft sensors maintain optimal performance during drastic temperature changes.
  • Delphi crankshaft position sensors are manufactured to meet or exceed OE requirements. They undergo certified electrical testing with industry EMI....
Check Stock

Fire Apparatus Driver/Operator: Pump, Aerial, Tiller, and Mobile Water Supply

  • 【REPLACE PART NUMBER】 Water pump & gasket : 16100-09201丨 Hydraulic tensioner : 13540-50030丨 Thermostat : 90916-03100丨 Tensioner roller / pulley : 13503-0F010 / 13503-50011 | Idler roller / pulley : 13505-0F010 / 13505-50030丨 Front camshaft seals : 90311-38065丨 Front crankshaft seal : 90311-A0001丨 Timing belt : 13568-09070丨 Serpentine drive belt :90916-02586.
  • 【FIT FOR LEXUS】 1998-2000 GS400 丨 2001-2007 GS430 丨 2003-2009 GX470 丨 1990-2000 LS400 丨 2001-2006 LS430 丨 1998-2007 LX470 丨 1992-2000 SC400 丨 2002-2010 SC430.
  • 【FIT FOR TOYOTA 】 2003-2009 4RUNNER 丨1998-2007 LAND CRUISER 丨2001-2009 SEQUOIA 丨 2000-2009 TUNDRA.
  • 【WHAT WILL YOU GET】 1*Water Pump Gasket丨 1*Hydraulic Tensioner 丨1* Thermostat 丨 1*Tensioner Roller丨 1*Idler Roller丨 2*Front Camshaft Seals丨 1* Front Crankshaft Seal丨 1*Timing Belt丨 1*Serpentine Drive Belt丨 Totally 10 Pieces Set of Timing Belt Water Pump Kit.
  • 【SALE SERVICE】 Please Check Carefully Whether the Oe Number of Our Product Is Applicable to Your Vehicle‘s Model Before Purchasing. Whenever I....
Check Stock

A-Premium Engine Camshaft Position Sensor Compatible with Volkswagen Beetle 2014-2018 Golf 2016-2017 GTI Jetta 2015-2018

  • 【Vehicle Fitment】Compatible with Volkswagen Beetle 2014-2018, Golf 2016-2017, GTI 2015-2018, Fit for Jetta 2015-2018.
  • 【Reference Number】04C907601K, 04C907601L, 04C907601B, PC1058.
  • 【Specification】Premium quality crankshaft position sensor for exceptional durability.
  • Utilizes the latest in design and material technology.
  • Ensuring quiet and maintenance-free experience..
  • 【Directly Fit】OE Replacement Brand New Crankshaft Position Sensor. Please enter your vehicle information in the top left corner to confirm the vehicle compatibility before purchasing..
  • 【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping experience. Any further question, please feel free to contact us at any time..
Check Stock

Apeixoto 10pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set 1/2in and 3/8in Sq Drive AP1060K

  • Function: The Apeixoto oxygen sensor removers will help your in adjusting and removing oxygen sensors, oil pressure sending unit vacuum swithces and fuel injections. These tools can be used most vehicles..
  • Packages: There are 10 pieces removers and sockets in the red case. The whole tool set comes in a solid red case which will protect the tools well during shpping and let you keep the tools well after usage..
  • Specifications: The specification for these 10 oxygen sensor sockets are : 1/2 inch dr x 22mm x 6PT x 110mm, 1/2 inch dr x 29mm x 6PT x 90mm, 1/2 inch dr x 22mm x 12PT x 78mm, 1/2 inch dr x 27mm x 12PT x 78mm, 1/2 inch dr x 28mm x 12PT x 78mm, 1/2 inch dr x 7/8 inch x 50mm, 3/8 inch dr x 7/8 inch x 6PT x 80mm, 3/8 inch dr x 7/8 inch x 6PT x 90mm, 3/8 inch dr x 7/8 inch x 30mm, and 3/8 inch dr x 1 inch and 1-1/6 inch x 74mm.
  • Material: The Apeixoto oxygen sensor removers and oil Pressure Sending Units are constructed with heat-treated chrome vanadium steel. It is totally rust and corrostion resistant. The surface has a black powder and it looks much more shinny..
  • Warranty: 100% satisfaction. If you come across any issue or need any assists during usage, we are here to help..
Check Stock

ATP Automotive Oxygen Sensor Socket Set 7PC Socket Set

  • 21Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen.
  • Most comprehensive kit available. Features extended and reinforced socket body removes the most stubborn sensors without rounding them off.
  • Automotive 6pt and 12pt sensor sockets set for installing and removing oxygen sensors, injectors and thermal switches.
  • 7/8inches Short low Profile O2 Oxygen Sensor Socket, 7/8inches Universal Oxygen Sensor Socket.
  • Universal Vacuum Switch PVS, TVS Socket Tool.
Check Stock

DTS New Oil Pressure Sensor Switch PS417 Replacement for Infiniti, Nissan

  • FITMENT - Oil Pressure Sensor fit for 2004-2009 for Infiniti QX56,2003-2009 for Nissan 350Z,2005-2006 for Nissan Altima,2005-2008 for Nissan Armada,2005-2009 for Nissan Frontier,2009-2010 for Nissan GT-R,2004-2009 for Nissan Pathfinder,2009 for Nissan Sentra,2004-2008 for Nissan Titan,2005-2009 for Nissan Xterra.
  • OE NUMBERS - PS417 201-2368 1S6896 PS561 25070-CD000 25070-CD00A.
  • FUNCTION - The crankshaft sensor can accurately and quickly feed back the position information of the crankshaft to the ECU, enabling the ECU to accurately analyze the cylinder compression to determine the ignition timing, which will improve the engine ignition efficiency and allow you to get a faster start and acceleration experience..
  • ADVANTAGES - 100% brand new aftermarket unit built to meet OEM specifications. Shipping from USA, fast shipping and good service. Factory price with higher cost-effective..
  • NOTICE - Please check picture,part number and fitment chart before placing order. For whatever we can help, please feel free to tell us via Email. We are always here for help you.
Check Stock

ECOTRIC Skid Plate Compatible with 2014-2022 Toyota 4Runner & 2009-2014 FJ Cruiser 4.0L V6 Aluminum Front Skid Plate Protection Replacement for PTR6089190

  • Beef up the aggressive stance of your 4runner or fj cruiser, prevent damage to underbody from rocks, branches, ice chunks and other types of road debris. Won't interfere with or block cooling system, provides unobstructed access to all maintenance points and vehicle tow hooks.
  • Compatible With - 2014-2022 Toyota 4Runner.
  • 2009-2014 Toyota Fj Cruiser (Important Note: Conflicts With The KDSS Sway Bar System). Replacement for PTR6089190, PT93800140, PT938-00140..
  • Easy Installation - no-drill installation uses vehicle's existing attachment mounts. Instruction & hardware included. You may need to use your original hardware for installation..
  • Heavy Duty - Made from 1/4-in thick aluminum. Rigorously tested to maximize protection and prevent vibration, stress and noise..
  • If your items encounter any adaptation or color difference or anything-else problems, please give us the opportunity to replace the item/part. We provide technical support at any time, please feel free to tell us what we can do for you, we will reply in 24 hours.
Check Stock

The Mob Hunter 9: Dimension War (Unofficial Minecraft Superhero Series) (The Mob Hunter (Minecraft's First Superhero))

  • APPLICATION: It is designed for a variety of applications, including sample preparation, enzyme preservation, enzyme-substrate reactions, DNA amplification, electrophoresis gel degeneration and serum coagulation.It can also be used for making Plasma Bio Gels..
  • PROGRAM MODE: 4 program setups can be stored for easy and quick use.The temperature can be set in 0.2°C increments temperature up to 150°C..
  • PT1000 TEMPERATURE SENSOR: The included external PT1000 temperature sensor allows for temperature control directly in the sample vessel. The Dry Bath Incubator can have automatic calibration with the external PT1000 temperature sensor..
  • LED DISPLAY: LED display shows timer and temperature simultaneously. It displays the Error code when there’s a fault..
  • STANDARD BLOCK INCLUDED: 20 x 1.5mL Heating Block is included. It's for conical tubes. The hole diameter is Φ11.5 and the hole depth is 36.9MM..
Check Stock

GZAIR Smart Wi-Fi Indoor Air Quality Monitor, Data Logger, PM2.5, PM1.0, TVOC, CO2 Detector, Temperature & Humidity, Real-Time Data via App

  • 6 IN 1: Measure PM2.5, PM1.0, TVOC, CO2, Temperature, and Humidity, with a sensitive laser particle sensor, laser TVOC sensor, and accurate NDIR CO2 sensor. .
  • Automatic & Manual Calibration: Offer two calibration modes, Manual Calibration, and Automatic Calibration. We have calibrated it manually in the factory, and it can automatically calibrate during the detection..
  • Wi-Fi Enabled & APP Smart Control: Smart PT02 can connect to the Internet, works seamlessly with Tuya App, Set alerts, receiving air quality measurements anytime and anywhere..
  • Wireless IoT Controller: Create a Smart Scene in the Tuya app, make PT02 control the Smart home appliances. First, you should add Smart PT02 and other Smart home appliances to Tuya APP. Then set the conditions. The PT02 monitor will activate Smart Fans, Air Purifiers, or other appliances in response to changes in your home’s air quality..
  • Supports RS485/Relays Signal Output: The RS485 port and Relay port are located on the rear of the device. And the RS485 supports data export. The Relays can control the appliances directly (This function is only recommended for professional personnel or engineers.).
Check Stock