Reviews Crane Rail Clips

Valken ASL M4 Airsoft Rifle AEG 6mm Rifle Echo Black

  • Two 7-slot MLOK rail segments (3 1/4-inch).
Check Stock

ABN Black Aluminum SAE Socket Holder Rail 3-Piece Set – 1/4, 3/8, 1/2 Inch Socket Rails and 16 Clips Tool Organizer

  • STAY ORGANIZED: Use the ABN Black Aluminum Socket Rail Tool Socket Organizer Tray SAE 3-Piece Set – 1/4″, 3/8”, 1/2″ Inch Socket Holders Organizers and 16 Socket Clips to better organize your tool parts.
  • This socket set organizer accepts both shallow and deep sockets.
  • USE ANYWHERe: Use the 17-inch x 0.82-inch (43cm x 2cm) rails as socket organizers for toolboxes drawer to organize your toolbox, wall socket organizer as you mount on a wall vertically or horizontally, socket tray as you set it on your workbench, or tool drawer organizer as you store it in a drawer.
  • 1-inch x 0.2-inch (25mm x 5mm) keyhole slots to mount on any surface (hardware not included).
  • SAE standard 1/4-inch, 3/8-inch, 1/2-inch socket drives.
  • BUILT TO LAST: Tool socket holder rail constructed from aluminum with black finish for strength and longevity.
  • Socket clips constructed from heavy-duty plastic.
  • End caps constructed from soft plastic (caps removable).
  • Set holds up to 48 sockets (16 sockets per rail).
  • SECURE YOUR TOOLS: Spring-loaded ball bearings on each clip offer a firm and secure hold.
  • Your sockets attach to plastic clips which are friction fit to the aluminum rail.
  • The clips are held in place by soft plastic end caps that are also friction fit to the rail.
Check Stock

Lancer Tactical Gen 2 Airsoft M4 AEG Carbine 10\ (Tan - High Velocity)

  • MATERIALS – Gen II version upgraded with a nylon reinforced body.
  • version 2 gearbox features metal gears along with the cylinder teeth.
  • RAIL SYSTEM FOR ATTACHMENTS – 7 lines of keymod on rail for customized placement of rail panels.
  • 2 removable 6-rib and 1 removable 10-rib rail sections for placement of accessories.
  • GEARS – Gears rotate smoothly provided by the 8mm ball bearings.
  • crafted and polished 6. 03mm tightbore barrel improves range and accuracy.
  • BATTERY – Simple battery (9. 6 V Nunchuck) placemen.
  • automatic power shut down once charger (included) detects battery is fully charged.
  • FEATURES – Rear sling mount is perfect for single point slings.
  • retractable crane stock adjusts to meet the battle situation.
Check Stock

Lancer Tactical Gen 2 Airsoft M4 AEG Carbine 10' (Gray - High Velocity)

  • MATERIALS – Gen II version upgraded with a nylon reinforced body.
  • version 2 gearbox features metal gears along with the cylinder teeth.
  • RAIL SYSTEM FOR ATTACHMENTS – 7 lines of keymod on rail for customized placement of rail panels.
  • 2 removable 6-rib and 1 removable 10-rib rail sections for placement of accessories.
  • GEARS – Gears rotate smoothly provided by the 8mm ball bearings.
  • crafted and polished 6.03mm tightbore barrel improves range and accuracy.
  • BATTERY – Simple battery (9.6 V Nunchuck) placemen.
  • automatic power shut down once charger (included) detects battery is fully charged.
  • FEATURES – Rear sling mount is perfect for single point slings.
  • retractable crane stock adjusts to meet the battle situation.
Check Stock

Lancer Tactical LT-19 Gen 2 M4 Carbine AEG Airsoft Rifle (Tan High FPS Polymer Style)

  • MATERIALS – Gen II version upgraded with a nylon reinforced body.
  • version 2 gearbox features metal gears along with the cylinder teeth.
  • RAIL SYSTEM FOR ATTACHMENTS – 7 lines of keymod on rail for customized placement of rail panels.
  • 2 removable 6-rib and 1 removable 10-rib rail sections for placement of accessories.
  • GEARS – Gears rotate smoothly provided by the 8mm ball bearings.
  • crafted and polished 6. 03mm tightbore barrel improves range and accuracy.
  • BATTERY – Simple battery (9. 6 V Nunchuck) placemen.
  • automatic power shut down once charger (included) detects battery is fully charged.
  • FEATURES –High capacity magazine holds 300 rounds.
  • retractable crane stock adjusts to meet the battle situation.
Check Stock

lancer tactical full metal gear with 10 keymod rail interface system polymer body lt-19 (black)(Airsoft Gun)

  • MATERIALS – Gen II version upgraded with a nylon reinforced body.
  • version 2 gearbox features metal gears along with the cylinder teeth.
  • RAIL SYSTEM FOR ATTACHMENTS – 7 lines of keymod on rail for customized placement of rail panels.
  • 2 removable 6-rib and 1 removable 10-rib rail sections for placement of accessories.
  • GEARS – Gears rotate smoothly provided by the 8mm ball bearings.
  • crafted and polished 6. 03mm tightbore barrel improves range and accuracy.
  • BATTERY – Simple battery (9. 6 V Nunchuck) placemen.
  • automatic power shut down once charger (included) detects battery is fully charged.
  • FEATURES – Rear sling mount is perfect for single point slings.
  • retractable crane stock adjusts to meet the battle situation.
Check Stock

[New Version] SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail – 2203

  • Not for 6K Pro!!!!!!!【HIGH CUSTOMIZATION】SmallRig BMPCC cage is specifically designed for Blackmagic Design Pocket Cinema Camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. It could be used on DJI Ronin S or Zhiyun Crane 2 gimbal stabilizer.
  • 【PERFECT PROTECTION】Secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. Rubber pads on the bottom protect your camera body from scratching.
  • 【MUTIPLE MOUTINGS】This cage comes with multiple mounting points, such as 1/4’’ & 3/8’’ threaded holes, cold shoe and 3/8’’ locating holes for ARRI standard, allow you to attach more accessories, like microphone or SmallRig Articulating Arm – 2070, etc.
  • 【NATO RAIL】Features built-in nato rail that allows you to quickly release accessories with NATO clamp. Mounting SmallRig Side Handle - 2187 for hand-held shooting.
  • 【FEATURED RECOMMENDATIONS】Compatible with Ronin S and Crane 2. For better setup, please search “Smal....
Check Stock

Tactical Girls 2022 Gun Calendar -Prior Year Collectible!

  • Designed to hold tape switch wires along the rail's edge or middle..
  • DAI PICKS Index clips are easy to install, and stay-put until pried off..
  • Several clips in a row can be used to protect a length of rail, and feature a non-slip surface..
  • Quickly find where your optics need to re-attach..
  • Each set comes complete with 30 total clips, 20 middle clips and 10 edge clips..
Check Stock

BRIO World 33210 - Rail & Road Loading Set - 32 Piece Wooden Toy Train Set for Kids Age 3 and Up

  • Product includes - The Rail and Road Loading Set comes with 32 pieces including a train with a special crane car and flatbed, 2 trucks and 2 magnetic....
  • Perfect for the creative toddler - Start your budding train engineer off on the right track with a BRIO Rail and Road Loading Set toy train, tracks....
  • Compatibility - As your child develops, so can their railway play as the 33513 Rail and Road Loading Set is compatible with all other BRIO railway....
  • Develops important skills - Playing with train sets helps children to understand and learn about their environment in a fun way, and the train....
  • Safe for your child - We conduct more than 1, 000 safety tests a year to ensure that our products conform to all safety standards, and we take pride....
Check Stock

Olsa Tools 1/2-Inch, 3/8-Inch & 1/4-Inch Drive Aluminum Socket Organizer | Professional Quality Socket Holder (Blue)

  • ...1/2-inch, 24x - 1/4-inch, 18x - 3/8-inch) with a 3 pc kit or get individual rails for the perfect set up for your toolbox..
  • ★ HIGH CAPACITY - Our Socket Rails are engineered with high-grade anodized aluminum that comes in 7 striking colours that are sure to make your co-workers jealous. You can purchase additional clips and end caps to further customize your rails to your liking. The clips can even be placed on both sides of the rails..
  • ★ CUSTOMIZE FOR YOUR DREAM TOOLBOX - Organize your sockets within 5 minutes with this hassle-free rail design. This is an easy-to-use system, simply organize the clips as you wish (they fit on both sides of the rail) then mount your sockets on the locking clips and take your rail wherever you need it..
  • ★ QUICK AND EASY SOCKET ORGANIZATION - Take your rails with you no matter where your next job is! The socket clips on these rails are built with strong ABS clips that have spring-loaded ball bearings to hold your sockets firmly and securely..
  • ★ SPRING LOADED CLIPS - Enjoy the peace of mind knowing that your sockets will be held securely in place. The socket clips on these rails are built with spring loaded ball bearings to hold your sockets firmly and securely..
Check Stock