Reviews Cr Coil Sheet

HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2，Ender-3 3D Printers

  • The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied..
  • The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed..
  • Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
  • Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines..
Check Stock

PrintWorks Professional Prepunched Paper 8.5 x 11 24 lb 44-Hole Spiral Coil 4 1 Pitch Binding Paper 500 Sheets White 04147

  • PrintWorks Professional prepunched spiral punch paper saves you countless hours of time spent manually punching booklets, catalogs and presentations 10 sheets at a time - just print and spiral coil bind..
  • Manufactured with crisp, straight hole punches that line up from sheet to sheet - PrintWorks prepunched papers keep your documents in correct alignment making them easy to spiral bind and eliminate the frustration of crooked holes or holes that run off the edge of the sheet (often caused by manual/machine paper punching)..
  • PrintWorks 44-oval hole spiral binding paper is compatible with most spiral binding coils and spiral binding machines and is perfect for documents that are printed on two sides. (4:1 pitch - center to center between holes is 1/4" - 4 holes per inch.).
  • Premium PrintWorks quality since 1964. Made in the USA from domestically sourced, environmentally friendly paper. 500 sheets per ream, 8.5 x 11, 24 lb., 44-oval spiral coil hole punched, 92 bright white paper packaged in an easy-open wrap..
Check Stock

Ceality Glass Bed for CR-10S Pro, CR-X, CR-10 V2, Ender-3 Max, 310x320x4mm, Official Version Build Surface

  • No Edge Curling - Official printer glass bed offered by Creality, its microporous coating on the upper surface can adsorb the model to glass bed surface, no worry of print edges curling..
  • Universal Application - This printer glass plate is well suited for most types of filament including: PLA, ABS, PETG, Nylon, TPU, Polycarbonate, wood and more..
  • Excellent Flatness - Improved borosilicate glass plate provides more flat and more smooth build surface than magnetic mat or pei sheet, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed.
  • This glass bed could be fixed with middle sized clips and wash with alcohol or acetone at room temperature..
  • Compatibility - This printer parts is only applicable with Creality printers as following, CR-10S Pro, CR-10S Pro V2, CR-X, CR-X Pro, CR-10 V2, CR-10 V3 and Ender-3 Max, pls confirm if this glass print bed compatible with your printer..
Check Stock

Kywoo Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 305x320mm for Tycoon Max/CR-10 / CR-10S / Lulzbot Taz 6 / Lulzbot Taz 5 / Tevo Tornado / Hictop Prusa i3 DIY

  • 【Adopted USA technology】：Designed beautifully and easily, processed by USA machine to make the PEI sheet unified and canonical during process. Each producing procedure is speculated strictly to make sure PEI sheet is perfect before selling. PEI with the frosted surface is of strong high-temperature stability, flame retardant, heat resistance, high strength, wear-resistance, and good printing stability..
  • 【Powerful adaptability】: Whatever ABS or PLA filaments (along with many other materials) can be used for printing model directly on the PEI surface. Don’t need other additional adhesives, tapes, or slurry. High strength and heat resistance. ·Compatible with PLA, PETG, ABS and other most filaments..
  • 【Recycle usage】:PEI sheet can be used for many times whatever you print which kind of models, if you clean the PEI sheet with some isopropyl alcohol, you can continue to print other type of models. It has a long life span and easily to be cleaned. Soft magnetic sticker: Strong magnetic force.
  • 【Size is suitable】PEI sheet dimension is (305mm x 320mm) with a thickness about 0.04 inches (1mm). This PEI sheet is made specifically for large format printers such as the Tycoon Max/CR-10 / CR-10S / Lulz....
Check Stock

3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12' x 12' Square with Premium Adhesive for CR-10 / CR-10S,Hictop CR-10, Hictop Hero d3 3D Printers 310x310MM (Pack of 4)

  • 【PACK of 4】Our 3D Printer build surface Platform Sticker Sheet are 12″ x 12″ (310mm x 310mm) square, fully matches heated bed on many popular 3D printers. Fits: Creality CR-10S/CR-10, Hictop CR-10, Hictop Hero d3, JG Aurora A5 and A5x, Artillery Sidewinder X1/X2, Folger Tech FT-5, Creative3D Elf CoreXY, SainSmart Coreception CoreXY, BIQU Thunder, ADIMLab Gantry, Wanhao D9 (300), Tenlog TL-D3 PRO, Sunlu S8, JGMaker Artist-D Dual Extruder, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on....
Check Stock

Vichoice GY6 6 Pins CDI Box , New Pack Of Racing Ignition Coil ,For 50c 70cc 90cc 110cc 125cc Dirt Bike ATV Go-Kart Chopper Pocket Bike with Cr7hsa Spark Plug

  • Fit For - TaoTao, Buyang, Sunl, Roketa, Lifan, Aim-EX, Kazuma, Coolsports etc. GY6 50cc - 125cc 150cc Scooter, Mopeds, ATVs and Go Karts..
  • New Ignition Coil Fits Following Engine Sizes:49CC 50CC 70CC 90CC 110CC 125CC 149CC 150CC GY6.
  • Package including： 1 cdi + 1 ignition coil + 1 spark plug.
  • Performance racing cdi & ignition coil, CR7HSA spark plug, CdI is ac fired cdi : 6 pin.
  • Guarantee - items sold by Vichoice are returnable for any reason within 90 days of delivery.
Check Stock

AutoShack CST100487PR Pair of 2 Front Driver and Passenger Side Complete Strut Coil Spring Assembly Replacement for 2013 2014 2015 2016 2017 Nissan Altima 2.5L 3.5L V6 FWD

  • For - 1997 1998 1999 2000 2001 Honda CR-V.
  • Kit Includes: 2x Front Strut and Coil Spring Assembly + 2x Rear Strut and Coil Spring Assembly.
  • Detroit Axle Radiators components are ready to meet the rigorous demands of today’s foreign and domestic passenger cars, trucks and SUVs.
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability.
Check Stock

Master Grade Bonsai Tools 205 Mm Wire Cutter

  • Name: wire cutter JTS- 10, Brand: TianBonsai.
  • Cutting Function: Cut training copper wire less than 8 mm in diameter..
  • Edge Hardness: HRC58, quenching by the high frequency coil.
Check Stock

LED Coasters,12 Pack Llighted Coasters,Glowing Wine Coasters,Blue LED Bottle Lights,Light Emitting Bottle Bottom lamp,Luminous Drink Cup Sticker,for bar,Party,Cocktail Decoration (Blue)

  • Suitable for various scenarios: such as bar, party, wedding, dinner decoration..
  • 　　The product includes: a box of 12 LED coasters, 8 spare CR1220 batteries (for coaster replacement batteries), 2 CR1220 batteries installed on each coaster..
  • 　　How to use: Open the package, unplug the insulating sheet (transparent plastic sheet) under the battery, and press the switch on the back to light up. There is a switch button on the back, press the switch button to switch modes..
  • 　　Mode selection: Monochrome has 3 lighting modes, fast flashing, slow flashing and always-on mode..
  • 　　Product advantages: It has an authorized 3M adhesive layer, which is flat and stable, and can be reused 2-3 times.
  • 4 high-brightness LED lights make the transparent container brighter at once.
  • it can be bright for more than 12 hours..
Check Stock

Diamond Original CR8900A Quad Band FM Mobile Antenna

  • The CR8900A is pretuned to give best bandwidth and VSWR over the FM portions of 10m, 6m, 2m, and 70cm ham bands when mounted on the side of vehicle (i.e. trunk lid) using a K400 or K600 series mount..
  • Designed specifically for the Yaesu FT-8900R.
  • The Diamond CR8900A quadband is a 10 meter, 6 meter, 2 meter and 440 MHz mobile antenna. It is a 1/4 wave on 10 and 6 meters providing and a 1/2 wave on 2 meters (2.15 dBi gain) and a 2 5/8 wave on 440 MHz (5.5 dBi gain). This antenna can handle up to 60 watts FM..
  • There are two center coils and a base coil. The connector type is UHF (for PO mount). The antenna is pretuned to give the best performance over the FM portions of the 10m, 6m, 2m and 70 cm bands when mounted on the side of the vehicle (such as a trunk lip mount). Suggested mounts would include the K400 or K600 series. This antenna is not recommended for a magnet mount or through-the-roof mounts. Includes an Allen wrench for tuning..
Check Stock