Reviews Cover Oil Cooler

6.0L Powerstroke Oil Cooler Flush Kit,Blue Anodize Adapter Flush Adapter for Ford 2003 2004 2005 2006 2007 2008 2009 2010 Diesel

  • Made of by high quality aluminum and Brass,prevent high oil temperature result in costly fuel systems and engine failure.Instead of spending a high price to replace the 6.0-liter oil cooler, it is more appropriate to spend a little free time to clean it. And our products can be used repeatedly..
  • With our 6.0L Power Stroke Oil Cooler Flush Kit, the oil cooler can be backflushed in less than an hour. By directing the water flow in the opposite direction of normal travel, contaminants are removed and, in most cases, the cooler is restored to new effectiveness..
  • No need to remove the plant cooling manifold. Coolant enters the cooler from the oil cooler, and when disturbed, the quick connection hose between the oil cooler and the cooler will usually start to leak, resulting in rewinding. Our device will not interfere with the original connection..
  • It is advisable to regularly monitor the Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification we recommend performing an oil cooler flush. Careful attention to this detail can prevent thousands of dollars of engine and fuel system damage. In the case of a cooling system that has experienced extreme neglec....
Check Stock

6AN 5Feet Stainless Steel Nylon Braided Fuel Line Hose Oil Gas Hose Oil Line Hose Silver

  • 【Material】Outside Hose Material: Coverd with High Quality Nylon and Stainless Steel Wires.
  • Inner Hose Material: CPE Synthetic Material Hose..
  • 【CPE Braided Hose】Mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel..
  • 【Application】This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
  • 【Performance】Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • 【Note】Not recommended installation in corrosive environment, braided fuel line's service life will be influenced..
Check Stock

Derale 13950 Atomic-Cool Remote Cooler , Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..
Check Stock

Portable Air Conditioners Fan Desktop AC Fan Evaporative Air Cooler with 2 Mists 3 Speeds, 4-in-1 Personal Cooling Fan 120° Oscillation Colorful Light Super Quiet Air Cooler for Home Room Office Bedroom

  • 4 in 1 Efficient Cooling >> This evaporative cooler is designed with 4 functions of refrigeration, humidification, air purification and nightlight. The cool water (supports adding ice to make it cooler) is processed by the built-in filter, turned into cool mist and blow out with the cool wind, to cool down the hot air and let you enjoy comfortable cooling wind..
  • Cooler & Stronger Wind >> This portable air conditioner fan brings you cooler wind with the help of the Dual Mist Jets that produces double quantity of cool mist. The strong fan with 3 speeds for you to set a comfortable wind. More cool mist and more cool wind, quickly cool and humidify the air around you, soothing every inch of your exposed hot skin with the nano cold mist..
  • Cover Larger Area >> Not only bringing cooler wind, this air conditioner cover larger area and range, because it supports horizontal 60° and 120° auto oscillation, and vertical 80° adjustable direction blade, to cover a large 3D area..
  • Run Longer Time >> This air conditioner fan is designed with a larger water tank (24oz/700ml) where you could easily add cool water and ice to make the wind much cooler, larger water tank ensures longer running time. Easy to clean, fill and empty. There is a water valve underneath the....
Check Stock

Transmission Torque Converter Oil Cooler Compatible with 2003-2009 Auto Heat Exchanger Base for Dodge Ram 2500 3500 Cummins Diesel 5.9L 6.7L Replaces OEM 68004317AA 5086946AA 5086946AB 4930582

  • TORQUE CONVERTER OIL COOLER - New replacement torque converter oil cooler for Cummins transmission torque converter cooler compatibility with....
  • HIGHLY PERFORMANCE - Replace a new oil cooler transmission can reduce the oil temperature, reduces oil consumption. Customers can find the....
  • FUNCTIONS - The transmission oil cooler is an essential component of every vehicle, helps the transmission stay cool, even when working harder than....
  • SYMPTOMS OF A FAILED TRANSMISSION OIL COOLER - The proper functioning of it is necessary for a healthy vehicle, and if it is worn, you could be in big....
  • KINDLY REMINDER - Kindly please refer to part number and fitment chart carefully before place order to avoid buying wrong. High quality OEM....
Check Stock

Engine Oil Cooler Kit - Compatible with Ford Trucks - Powerstroke 6.0L V8 F250, F-350, F450, F550 Super Duty, Excursion, E350, E-450 - Replaces Part 904-228, OCK388, 3C3Z 6A642 CA - Gasket Seal Kit

  • Replacement Engine Oil Cooler With Gasket Seals & O-Rings - Is a heat-exchanger which is commonly a radiator type of cooler which cools engine oil from the engine. It removes excess heat from the oil using the engine coolant that flows around as the engine oil passes through the cooler. The engine oil cooler can be located under the intake above the engine..
  • Compatible Replacement for Ford Vehicles - 2004 - 2005 E-350 Club Wagon | 2004 - 2010 E-350 Super Duty | 2004 - 2007 E-450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F-250 Super Duty | 2003 - 2007 F-350 Super Duty | 2003 - 2007 F-450 Super Duty | 2003 - 2007 F-550 Super Duty |..
  • Replaces Part# 3C3Z 6A642 CA, 904228, 904-228, 015339, OCK388, 3C3Z-6A642-CA, 3C3Z6A642CA - If you are noticing engine oil in your coolant system, oil or coolant leaking from the oil cooler or engine coolant mixed with your engine oil then your oil cooler might need to be looked at or replaced. This engine oil cooler kit also includes viton gasket seals needed for the proper service on your vehicle..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and it will fit and work exactly like the factory part. This part is commonly found on popular Powerstroke 6.0 V8 models....
Check Stock

Improved Racing EGM-106 Low-Profile Oil Cooler Adapter for GM LS Engines, 10AN

  • 100% bolt-on unit replaces the factory oil bypass cover, just above the oil filter, and makes for easy installation of an oil cooler on any rear sump GM LS family engine. No oil filter relocation is required.
  • Slim design provides maximum clearance for aftermarket headers.
  • Features two 1/8” NPT ports for oil sensors or a turbo oil supply line.
  • 6061-T6 billet aluminum construction and black anodized finish. Female -8AN O-ring boss threads. Includes two black anodized aluminum fittings with Viton O-rings for -10AN lines.
  • Made in USA. Lifetime manufacturer's warranty.
Check Stock

Transmission Cooler LPD47391 Trans Cooler 40,000 GVW Transmission Cooler Kit with Mounting Hardware Transmission Oil Cooler With Cooler Hose

  • 1.[ Transmission Cooler That Provides The Best Protection for Cars ]: When your vehicle needs an auxiliary transmission oil cooler, it can provide you with the best protection. The trans cooler can be used to cool the engine crankcase, clutch, valve assembly, etc. It is an essential tool for heavy-duty applications..
  • 2.[ Highly Compatible Trans Cooler ]: The transmission cooler kit is suitable for advanced cooling protection and traction applications of cars, vans, light trucks, R.V. below 40,000GVW..
  • 3.[ Part Number For Transmission Oil Cooler ]: LPD47391.
  • 4.[ Transmission Performance Oil Cooler Made of High-quality Materials ]: This transmission cooler is made of high-quality materials. The brazed aluminum structure is characterized by its high temperature resistance, corrosion resistance and long service life. The improved fin spacing is more precise, which can achieve efficient airflow and cooling..
  • 5.[ Transmission Cooler Kit With Complete Accessories ]: This kit includes transmission cooler, bolts, nuts, washers and steel mounting straps, brass fittings, high-quality cooler hoses and hose clamps..
Check Stock

EVIL ENERGY 10 Row AN10 Oil Cooler Kit Universal 10AN Engine Transmission Aluminium Alloy Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep low oil temperature, help to improve the lubricating effect of engine oil, prevent parts damage and prolong engine life.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 10Row oil cooler,Oil Capacity:0.24L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..
Check Stock

EVIL ENERGY 15 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black

  • Universal: universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location: choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function: keep low oil temperature, help to improve the lubricating effect of engine oil, prevent parts damage and prolong engine life.This stacked-plate oil cooler can be used to cool down engine,transmission, and rear-differentials..
  • Size: 10AN 15Row oil cooler,Oil Capacity:0.8L.Test Pressure: 116psi,Burst Pressure:232psi.Material:aluminium alloy..
  • Please measure before purchase.EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..
Check Stock