Reviews Countersink Deburring Tool

ARES 48001 – External Rotary Deburring & Chamfer Tool (13-36mm) – 3/8-Inch Shank for Use with Drill or Hex Driver - Clean and Repair Threaded Fasteners, Studs, and Bolts

  • ...Deburring Chamfer Tool】EZARC Deburring chamfer tool set includes debur tools covering external diameters of 1/8″-3/4″ (3-19mm) and internal diameters of 1/8″-5/8″ (3-16mm). Deburring chamfer tool set features quick release shank fits all handheld and stationary drills..
  • 【Exquisite Crafts】The internal countersink chamfer is made of M2 high-speed steel, and the surface is black nitrided after heat treatment. The head of the external deburring chamfer is cast with zinc alloy, and the surface is black and bright electrophoretic treatment. 3 pieces of YG8 carbide blades provide better performance and longevity than high speed steel blades..
  • 【Easy to work】Attaching the deburring external chamfer tool to the end of your power drill, Use the speed on the drill bit between 0-400 RPM, and then slightly applying pressure to remove the burr. Do not use impact mode..
  • 【Safety Design】The accurate deburring external chamfer tool easily shaves the outer rough edge of bolts, newly-cut pipes or rods, removing burrs to keep edges smooth. Quickly repairs damaged bolts and tightens the nuts in place without hurting your hand, no sparks, and no burns.
  • Simplifies the repair process. The internal deburring tool with 5 flute bit design allows it drilling sm....
Check Stock

CONQUER Tools Deburring External Chamfer Tool HSS Blade Deburring Drill Bit Remove Burr Tools Quick Release Shank Fits for 1/8 -3/4 3mm-19mm ,Countersink

  • Easy to work- Best deburring tool for metal. Attaching the deburring external chamfer tool to the end of th power drill, Use the lowest speed on the....
  • Cost-Effective- These deburring external chamfer tool can be used for repairing damaged bolt and tightening the nuts in place. You do not need to....
  • Safety Design- Quickly repairs damaged bolts and tightens the nuts in place without hurting your hand, no sparks, and no burns.
  • Using proper speeds-Drill use 0-400 RPMs. Fit 1/8' (3mm) to 3/4' (19mm). Countersink.
  • Widely Application-HSS blades. Effectively used in Stainless Steel, Hardened Steel, Mild Steel, Copper, Brass, Aluminum, Fiberglass, Wood, Plastic.
Check Stock

AFA Tooling Deburring Tool with 10 High-Speed Steel Rotary Burr Removal Blades and Countersink Hand Reamer

  • ... or PVC pipes, as well as metal edges of auto parts, gears, or any other freshly cut metal or wood parts. Trim your 3D printed plastic objects or parts, quickly removes burrs from nylon, ABS and PLA without melting the filament. Resin art is booming, and our deburring tool is perfect for shaving and smoothing..
  • COUNTERSINK HAND REAMER – Sharp 62-64 HRC 90° angled blade, perfect for countersinking and enlarging circular openings in wood, plastic or metal. Also works great for removing burrs around the hole edges. Whether you are an industrial professional or a DIYer, our tools are great for you!.
  • HIGHLY DURABLE HSS STEEL DEBURRING BLADES - The blades are made of tempered high-speed steel that makes them sharp, strong, and resistant to wear. HSS steel is usually 80% longer lasting then regular steel, and that’s why we use it, because we care about our performance!.
  • SUPERIOR QUALITY, COMFORT AND CONVENIENCE- Equipped with an ergonomic knerled wide body aluminum handle for secure grip, quality machined parts and a secure case for our extra blades, we know our tool is built to last. Our easy to use housing accepts various swivel head blade types for different applications..
  • OUR GUARANTEE: We have been in business since 2013, and we care about our cu....
Check Stock

AFA Tooling Deburring Tool with 10 High-Speed Steel Rotary Burr Removal Blades and 2 Countersink Hand Reamers

  • ...es, as well as metal edges of auto parts, gears, or any other freshly cut metal or wood parts. Trim your 3D printed plastic objects or parts, quickly removes burrs from nylon, ABS and PLA without melting the filament. Resin art is booming, and our deburring tool is perfect for shaving and smoothing..
  • 2 SIZES OF COUNTERSINK HAND REAMERS – Sharp 62-64 HRC 90° angled blades, perfect for countersinking and enlarging circular openings in wood, plastic or metal. Also works great for removing burrs around the hole edges. Whether you are an industrial professional or a DIYer, our tools are great for you!.
  • HIGHLY DURABLE HSS STEEL DEBURRING BLADES - The blades are made of tempered high-speed steel that makes them sharp, strong, and resistant to wear. HSS steel is usually 80% longer lasting then regular steel, and that’s why we use it, because we care about our performance!.
  • SUPERIOR QUALITY, COMFORT AND CONVENIENCE- Equipped with an ergonomic knerled wide body aluminum handle for secure grip, quality machined parts and a secure case for our extra blades, we know our tool is built to last. Our easy to use housing accepts various swivel head blade types for different applications..
  • OUR GUARANTEE: We have been in business since 2013, and we care about our ....
Check Stock

Noga SP7700 | 7 Pc Complete Deburring Tool Set in Plastic Case

  • The 7 most popular deburring tools you need to carry for any deburring application.
  • Set includes: Adjustable Scraper SC8000, Keyway Burr NG3300, V Cut NG3200, Mini Scraper NG3700, Countersink NG3100, Internal Scraper NG3710 and Super Burr NG3003.
  • Deburring blades included with set as shown Packed in one handy box..
Check Stock

General Tools 130 T Handle Reamer, 1/8-1/2 Inch (3.175mm-12.7mm) Tapered/Fluted, Guitar Woodworker Luthier Tool

  • ENLARGES HOLES: perfect for when a drill could cause cracking in materials.
  • LUTHIER/GUITAR TOOL: enlarges bridge pin holes, headstocks, holes for tuners and volume/tone knobs.
  • INCREASED LEVERAGE: T-handle provides leverage for easier reaming with greater control and easier turning.
  • REMOVES BURRS: from wood, cut pipe, tubing and conduit. Inside deburring edge tool with capacity of 1/8" to 1/2".
  • ENLARGE & COUNTERSINK HOLES: In sheet metal, plastic and other materials with little effort.
  • DURABLE: made of hardened and tempered steel with precision ground cutting edges.
Check Stock

Greenfield Threading 330088 Metric High Speed Steel Jobber Drill Plug Hand Tap Set (18-Piece Set)

  • Features：003cbr003e 1：Complete hole drilling, tapping, deburring and countersinking in one operation with power impact tool.003cbr003e 2：Back tapered beyond tap to prevent thread damage from over-drilling.003cbr003e.
  • 3：Made from high-speed steel, these combination drill and tap bits are designed to tap up to 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
  • 4:A perfect countersink drill bit set, a perfect tap and die set, two in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • 5:High speed steel construction provides extra durability to drill bits to perform multiple drilling operations while maintaining its strength..
  • 6:Self-centering point, do not need assistant center drilling or center punching..
Check Stock

ABN Bolt Deburring Tool - 0.5 to 1.4in Deburring Bit Chamfer Tool Drill Attachment for Steel, Copper, Brass, and Wood

  • [Finish Your Projects]: Smooth out edges and other imperfections on your projects or crafts with the ABN 0.5 to 1.4-Inch Deburring Chamfer Tool.
  • Create smooth, beveled edges on your art, home, or vehicle projects with stainless steel deburring tool.
  • [Perfect Cut Every Time]: Deburr chamfer bit repairs damaged bolts and fasteners to get the most uses.
  • Deburring repair tool cuts rough edges off fresh-cut pipes and bolts to create a beveled edge.
  • [Designed for Different Materials]: Metal and PVC deburring tool can be used on stainless steel, hardened steel, mild steel, copper, brass, aluminum, fiberglass, wood, and plastic.
  • Use copper deburring tool on round bars, nuts, bolts or rebar 0.5 to 1.4-inch (13 to 36mm) in diameter.
  • [Fits Your Tools]: 3/4-inch hex shank on external deburring drill bit fits your 0-150 RPM (revolutions per minute) drills.
  • Threaded rod deburring tool should not be used with impact drivers.
  • [Built to Last]: Bolt rounding tool is made of high-speed steel which displays hardness and helps prevent abrasion.
  • Deburring chamfering tool measures 2.4-inch (6.1cm) long with a diameter of 1.8-inch (4.6cm).
Check Stock

1PCS Deburring External Chamfer Tool, 1/2'to 1 2/5' (13mm-36mm) Bolt Deburring Tool Stainless Steel Remove Burr Tools HSS Blade Deburring Quickly Repairs Tool for Steel, Copper, Brass, Wood

  • 【Steel Material】The handle material of the deburring tool is chrome vanadium steel, the shell is zinc alloy, and the alloy cutter head, high hardness and durable, It has safe and efficient cutting capabilities, suitable for Hexagon Shank External Chamfer.
  • 【Fits Your Tools】 Deburring Quickly Repairs tool Fits for 1/2"to 1 2/5" (13mm-36mm)，3/4-inch hex shank on external deburring drill bit fits your 0-400 RPM drills.
  • Before using the Deburring tool, use oil to improve the tool performance.
  • 【Efficiently Safety Design】The hexl shank deburring tool can be tightly connected with the head drill, and it has sharp teeth inside, which can cut bolts safely and effectively, quickly repair damaged bolts and tighten nuts in place, without hurting hands and producing no sparks.
  • 【Operation simply】You can attach a deburring external chamfering tool to the end of a power drill and apply light pressure at the lowest speed to remove the burrs. You don't need to look for replacement bolts, deburring tools repair damaged bolts and improve work efficiency, A good helper for home tools and factories.
  • 【Widely Application】Deburring tools have strong cutting and repairing capabilities and are very effective in deburring, Deburring External Chamfer Tool effecti....
Check Stock

2PCS Deburring External Chamfer Tool Bolt Deburring Tool Stainless Steel Remove Burr Tools Deburring Quickly Repairs Tool Fits for 1/8 -3/4 3mm-19mm Hexagon Shank External Chamfer

  • 【Steel Material】The handle material of the deburring tool is chrome vanadium steel, the shell is zinc alloy, and the alloy cutter head, high....
  • 【Efficiently Safety Design】The hexagonal shank deburring tool can be tightly connected with the head drill, and it has sharp teeth inside, which....
  • 【Operation simply】You can attach a deburring external chamfering tool to the end of a power drill and apply light pressure at the lowest speed to....
  • 【Widely Application】Deburring tools have strong cutting and repairing capabilities and are very effective in deburring, Deburring External Chamfer....
  • 【High Speeds】 Deburring Quickly Repairs tool Fits for 1/8"-3/4"(3mm-19mm), Drill use 0-400 RPMs, Before using the Deburring tool, use oil to....
Check Stock