Reviews Corrugation Pipe Production Lines

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

  • ..., optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
  • CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
  • BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
  • COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..
Check Stock

30pcs Pipe Screens Filters 1/2inch Pipe Screens Stainless Steel Metal Screen Filter for Pipes with Box Packed

  • QUALITY PIPE SCREENS FLITERS:Pipe screens filters are made of high quality stainless steel, it is sturdy and durable in use. Pipe screens filters 1/2inch are also easy to use and clean. Mesh screen for pipe has a wide application in our life..
  • 30PCS MESH SCREENS FOR PIPE YOU WILL GET:You will get 30pcs pipe screens 1/2inch. These stainless steel mental screen filter can last longer than brass. 30pcs metal screens for pipes can be used for a long time..
  • FINE PRODUCTION METAL SCREEN FLITER FOR PIPES:Metal screen filter for pipes are produced with craftsmanship, the cutting edges is neat and smooth. Pipe screens 1/2 inch with fine production will bring you good using experience..
  • STAINLESS STEEL METAL SCREEN FLITER PACKED WITH BOX:Our stainless steel metal screen filter are packaged with a metal box, so there is no need to worry that these mesh screen for pipe get damaged on their delivery. Mesh screen for pipe with a metal box are also easy for you to take anywhere you want..
  • WIDE APPLICATION PIPE SCREEN FLITER 1/2INCH:Pipe screen filters metal screens for pipes has a wide application in our life, they can fit for most pipe. Pipe screen stainless steel metal screen filter is also a great gift choice for your boyfriend, husband, father or grandfather..
Check Stock

CGOLDENWALL Handheld Ultrasonic Flowmeter Clamp on Flow Meter Portable Liquid Flow Meter with  S1+M2 Transducers for Copper/PVC Pipe DN15-700mm 1/2-28\ ((Old or New Panel))

  • S1+M2 TRANSDUCERS: Easy to setup the transducers on the pipe and enter the required information in the control unit.No need to destroy the pipeline and stop production during the measurement process.S1(DN15-100mm, 1/2-4"), M2(DN50-700mm, 2-28").
  • DIGITAL DISPLAY: The Ultrasonic Flowmeter can display cumulative flow, instantaneous flow, velocity, and working status at the same time. Accuracy: 1%, linearity: 0.50%, repeatability: 0.20% accuracy: ±1%, calibration certs included. Note: In order to provide a better user experience, we upgraded the product label. The product you received may be the old version or the new version.
  • DATA STORAGE AND OUTPUT: This Ultrasonic Flow Meter has a built-in data logger, which can store up to 2000 lines of measurement data. And you can download the logged data onto PC through the RS232 interface..
  • LONG STAND TIME: This Flow Meter is equipped with a built-in high-capacity rechargeable battery, which can support the flowmeter to work continuously for up to 12 hours..
  • WIDE APPLICATION: Come with S1+M2 transducers, and the measuring range is DN15-700mm, 1/2-28". It can work on Copper pipe, PVC pipe to detect the flow of liquids such as sea water, alcohol, river water, industrial sewage, lubricating oil, diesel, fuel oil, etc.N....
Check Stock

60 Inch Gas Hose Connector Kit for Stove Dryer Gas Water Heater Pipe Diameter 5/8 in OD（1/2 in ID） Connector Size 1/2 FIP.1/2 MIP.3/4 MIP Stainless Steel Yellow Rind

  • KIT INCLUDE: 1 set bellow with yellow rind. 2 pack threaded connectors 15/16 Inch-16 UNx3/4 Inch MIP(Tapped 1/2Inch FIP ), 2 pack 15/16 Inch-16 UNx....
  • COMPATIBLE WITH: A stainless steel gas line hose designed mainly for gas stove, gas dryer, gas water heater. It has an outside dimension of 5/8 inch,....
  • DESIGNED CORRUGATED: The stainless steel gas line hose is designed with corrugation, for better use in a narrow range. The corrugated pipe has high....
  • EASY TO INSTALL: No need for more connectors. Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more....
  • ONE YEAR WARRANTY: Safe use is always the first goal of the product.Our products have gone through many quality checks and we never compromise on....
Check Stock

Pipe Center Finder, Pipefitter Tools w/Centering Head, Pipe Fitting Tools Center Finder Tool to Measure Pipe Diameter Over 0.5" and Up, 4" Y-Type Base Fitted with Adjustable Dial Bubble Protractor.

  • 【Economical Measuring Tool】This Pipe Marker Centering Tool is efficient and useful for setting center lines, determining angles and marks for butt-ins and locating points inside pipes or tanks, arranging keyways and calculating declivity. It can measure tanks or pipes with a diameter of at least 1/2" or larger..
  • 【Easy to Operate】Step1.Loosen or tighten the hexagonal nut with the included hex key allen wrench. Step2.Place the pipe marker tool on the pipe and find the angle you want. Step3.Push the center column down to the fixed point position. Step4.Tap with a hammer to leave a fixed point mark on the pipe..
  • 【Durable and Sturdy Material】The pipe fitter tool can wrap around the circumference of pipes to measure and mark, and it is made of a highly flexible, heat-resistant gasket material. This Pipe Center Finder Tool is easy to use for pipe fitters and welders as a must have tool..
  • 【Y-Head Shape Base with a DSL】This safety pipe center finder has a 4 inch Y-type base fitted with an adjustable dial bubble protractor (DSL). You could push the center column down to the fixed point position as you want. It is a must have on your list of pipe welding tools..
  • 【Adjustable Dial Bubble Protractor】Printed with a scale in inches, an inch chart and....
Check Stock

SharkBite 1 Inch x 300 Feet White PEX-B, PEX Pipe Flexible Water Tubing for Plumbing, U880W300

  • SHARKBITE WHITE PEX-B PIPE: This SharkBite white PEX-B pipe is available in coils up to 1,000 feet in length, allowing longer runs and fewer connections to save time, money, and potential leak points.
  • FREEZE RESISTANT: This flexible PEX tubing expands and contracts as water freezes and thaws within the pipe.
  • ideal for hot and cold potable water distribution, fire protection, and municipal water service lines.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass PEX water tubing offers faster installation compared to rigid pipe, six-month UV resistance, and the highest-rated chlorine resistance.
  • PREFERRED BY THE PRO: This portable PEX pipe is certified to meet ASTM F2023 oxidative-resistance requirements for continuous hot water recirculation.
  • approved for water service lines and burial applications including being buried under concrete.
  • SPECS: SharkBite water pipe tubing features a minimum working temperature of 33 degrees F at 160 PSI, a maximum working temperature of 200 degrees F at 80 PSI, and a maximum working pressure of 160 PSI at 33 to 70 degrees F.
Check Stock

Forum Novelties Corn Cob Pipe Standard

  • AN AMERICAN CLASSIC - The Missouri Meerschaum Company began in 1869 and has been producing made-in-USA, gold-standard quality corn cob and hardwood....
  • PREMIUM CRAFTSMANSHIP - Each pipe has been specifically crafted from all new materials to give you the highest quality and most pleasurable smoking....
  • COOL, CLEAN SMOKE - These light, porous pipes have similar moisture wicking properties to a more expensive meerschaum pipe, providing a dry, flavorful....
  • BASED ON TRADITION - The production of these pipes follows the classic practice, with some of the pipe shapes still being hand-turned on a lathe..
  • RUSTIC FEEL - Missouri Meerschaum offers an inexpensive, yet lasting tobacco pipe for the beginner smoker or the discerning pipe enthusiast. They make....
Check Stock

HEATIT JHSF1 Self Regulating Pre-Assembled Heating Cable 75-feet 120V Roof deicing and Pipe freeze Protection

  • 6 ft. water pipe heating cable, 42 watt, black color.
  • Stops metal and rigid plastic pipes from freezing down to -40°F — built-in thermostat automatically turns heating on when pipe temperature is below 42.8° F (close to freezing) and turns heating off once pipe is warmed to 55.4° F (well above freezing).
  • A single 6 foot heating cable is suitable for 6 foot to 8 foot long pipes that are 3/8 inches to 3/4 inches in diameter, or for 6 foot long pipes that are 1 to 1-1/2" in diameter. NOTE: Use only for water filled plastic (including PEX) or metal pipes. Not for use with anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines, and so on..
  • Features grounded plug with indicator light.
  • Pre-assembled, easy to install using the included instructions. Materials required (not included) are: aluminum foil (recommended for plastic pipe), fiberglass plumbing pipe insulation, fiberglass tape or similar with temperature rating 175° F or higher..
Check Stock

Pony Tools 50 3/4in. 6 Pack Ajustable Clamp Fixture for Black Pipe

  • Pony 50 Clamp Fixture for 3/4 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
  • Mounts on any length 3/4" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
  • Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
  • Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
  • Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.
Check Stock

Pony Tools 52 6 Pack 1/2in. Ajustable Clamp Fixture for Black Pipe

  • Pony 52 Clamp Fixture for 1/2 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
  • Mounts on any length 1/2" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
  • Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
  • Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
  • Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.
Check Stock