Reviews Copper Wort Chillers

Coldbreak Homebrew 6-11 Gallon Batch Copper Immersion Wort Chiller, Large, 3/8” x 60' Pure Copper, Leak Free Compression Barbs, Tubing and Garden Hose Fitting, USA Made

  • ...nning into your wort since the water runs in the outer plastic hose but the wort runs in the inner stainless tube..
  • Why choosing stainless steel?: This stainless wort chiller has a sufficient contact area for cooling down boiling wort in a hurry, negligible cost difference and time to cool difference compared to the copper, but stainless has a huge upgrade in durability, stability, cleaning and aesthetics, stronger and withstands handling without dents or kinks, easier to keep clean, no discoloration like copper, less oxidation or corrosion inside where you can't get to it, won't add bad flavors to your beer!.
Check Stock

Northern Brewer - Copperhead Copper Immersion Wort Chiller for Beer Brewing

  • The copper brother to our customer favorite Silver Serpent, the sleek Copperhead 25-foot copper immersion wort chiller is the fast way to cool your wort to pitching temps!.
  • Simply drop your clean chiller into the kettle a few minutes before the end of the boil and it will be ready to go..
  • Brew with peace of mind like never before. Drop-angle connections keep surprise leaks outside your kettle and away from cooling wort..
  • Standard garden hose connection allows for brewing outside or connects to a laundry sink faucet as your chilling water source..
  • Comes fully assembled with tubing, barbed fittings, and hose clamps..
Check Stock

Ferroday 20 Plate Wort Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 NPT Thread Plate Chiller (7.5\ x 1.97\)

  • [Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
  • [Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 20 brazed plates and cools wort within minutes rather than several hours..
  • [Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
  • [Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
  • [Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....
Check Stock

FERRODAY Wort Chiller 30 Plate 1/2 NPT Plate Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 Thread Plate Chiller - 7.3' x 2.8'

  • [Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
  • [Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 30 brazed plates and cools wort within minutes rather than several hours..
  • [Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
  • [Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
  • [Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....
Check Stock

2Pcs Stainless Steel Female Quick Disconnect FPT 1/2 Homebrew Fitting Connector Homebrewing by ProMaker FPT Male

  • High Quality:All made with heavy duty 304 stainless steel,look great and last a lifetime.
  • Health and Convenient:Setup and clean up easily,the quick disconnect allow for easy sanitizing during your brew day,no infection and easy to use.
  • Brewing Tool:Holds pressure for brewing applications when moving liquids at 60Psi or Less,perfect for home brewing.
  • Various Usage:Connector can be Combinated to suitable for your use such as pumps,ball valves,wort chillers and any other machine need 1/2 female....
  • Package:2*1/2 inch Quick Disconnect Female Threaded NPT.
Check Stock

Super Efficient 3/8\ x 25' Stainless Steel Wort Chiller

  • Perfect for the kitchen homebrewer that is making extract batches. Typically, with extract batches you boil a smaller amount of concentrated wort (1-3 gallons) and then add clean cool water before adding the yeast..
  • The compact 15' copper immersion chiller is the perfect size for these batches and easily connects to your kitchen sink with a sink adapter (not included)..
  • Made in the USA (Michigan) from pure 3/8” copper tubing..
  • Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
  • Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
  • The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
  • 6.75" x 3" x 14" (coil diameter x coil height x inlet height).
Check Stock

2 Pack 1/2 barb Hose Home Brewing 304 Stainless Steel Female Quick Disconnect Mash Tun wort chiller Beer Brewing Connector brewing equipment 1/2 female barb

  • 【304 Stainless Steel 】 The FPT quick disconnect is made of top quality 304SS that will last a lifetime. The internal o-ring is food grade....
  • 【Quickly Switch Lines Between Equipment】 1/2 NPT thread quick disconnect can attach to any 1/2 male thread fitting（ball valve,wort chillers,beer....
  • 【Push-On Hose Fittings 】Firstly you need to push a lever on barbed quick disconnect .And then take the Female fitting into the barbed quick....
  • 【No Leaks】The barbed quick disconnect has a red silicone gasket inside.It will create liquid & gas tight seals between FPT fitting and the barbed....
  • 【Connection Made Easy】This quick disconnect set can take one hand to take on or off. Their parts fit together very well . The FPT quick disconnect....
Check Stock

Coldbreak Homebrew 1-3 Gallon Batch Copper Immersion Wort Chiller 3/8 x 15 Pure Copper Leak Free Compression Barbs Vinyl Tubing and Garden Hose Fitting Included USA Made

  • Perfect for the kitchen homebrewer that is making extract batches. Typically, with extract batches you boil a smaller amount of concentrated wort (1-3 gallons) and then add clean cool water before adding the yeast..
  • The compact 15' copper immersion chiller is the perfect size for these batches and easily connects to your kitchen sink with a sink adapter (not included)..
  • Made in the USA (Michigan) from pure 3/8” copper tubing..
  • Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
  • Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
Check Stock

FERRODAY Stainless Steel Quick Disconnect Set 1/2 NPT Female Disconnect 1/2 Barb Brewing Quick Disconnect For Wort Pumps for Wort Chiller Connectors for Ball Valve Hose Fitting & O-rings

  • 【304 Stainless Steel 】 The FPT quick disconnect is made of top quality 304SS that will last a lifetime. The internal o-ring is food grade....
  • 【Quickly Switch Lines Between Equipment】 1/2 NPT thread quick disconnect can attach to any 1/2 male thread fitting（ball valve, wort chillers,....
  • 【Push-On Hose Fittings 】Firstly you need to pull up the collar on the barbed quick disconnect, then put the Female fitting into the barbed quick....
  • 【No Leaks】The barbed quick disconnect has a red silicone gasket inside. It will create a tight seal for liquid & gas between FPT fitting and the....
  • 【Connection Easily】This quick disconnect set allows one hand operation of take on/ take off. All parts fit together very well . The FPT quick....
Check Stock

Northern Brewer Deluxe Homebrew Starter Kit, Equipment and 5 Gallon Recipe (Fresh Squished IPA)

  • A 30' wort chiller is the perfect size if you are making full boil extract kits or making smaller all grain batches (3-6 gallons)..
  • Made in the USA (Michigan) from pure 3/8” copper tubing..
  • Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
  • Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
  • The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
  • It can easily connect to your kitchen sink with a sink adapter (not included).
  • 9" x 4.25" 18" (coil diameter x coil height x inlet height.
Check Stock